John_mcgarvie
Active member
Well this picture is of a beautiful thing
http://i1376.photobucket.com/albums/ah32/johnmcgarvie0/1967%20mustang%20200%206cyl/20160116_140655_zpsjp8ixkti.jpg/[img]
I FINALLY got the head done and back on. She runns great BUT a few things left.
1 proper heat choke adjustment. I pressed in a new .25 369 stainless tube into the exhaust manifold and matched the original bends and used the original. Asbestos? Insulation.
2 I have the spark plugs torqued but i spilled a little oil in the spark plug hole and im getting bubbles when idling these plugs had no ring neither did the ones i took out.
http://i1376.photobucket.com/albums/ah32/johnmcgarvie0/1967%20mustang%20200%206cyl/20160116_140655_zpsjp8ixkti.jpg/[img]
I FINALLY got the head done and back on. She runns great BUT a few things left.
1 proper heat choke adjustment. I pressed in a new .25 369 stainless tube into the exhaust manifold and matched the original bends and used the original. Asbestos? Insulation.
2 I have the spark plugs torqued but i spilled a little oil in the spark plug hole and im getting bubbles when idling these plugs had no ring neither did the ones i took out.
Your picture link didn't work for some reason.