Finally got my custom 4.030, 1.190CH 1/16 1/16 3/16 custom forged pistons from Race Tech through flatlander racing, a true flat top with a 0.0025 to 0.0030 clearance and I have howards file to fit plasma moly pistons rings 4.035. It was a true pleasure dealing with Phil at flatlanderracing and Mike at Race Tech, I don't know how much shipping was, but the pistons cost me $465.00. Race Tech is an off shoot of JE as the owner is the ex owner of JE pistons. I thought for sure I was going with the 14210 probe pistons until Phil at flatlanders put me on the right track. I should get my crank back sometime next week, it has been almost a month, but ole Tommy Tuche said I was unnormal in all my requests, so I gladly took it as a compliment. I polished my 240 rods and it off to the field with some #4 steel shoot to shot peen them redneck style with a 20 gauge. So far I think I am still sending my head off to Arnolds Head Service.
69 Early bronco, 4.11, toploader 4speed, 68k 3inch body lift, ET about 50 something!!!