Search found 899 matches

by Does10s
Thu May 03, 2018 3:02 pm
Forum: Aluminum Cylinder Head
Topic: Pushrod Issues
Replies: 4
Views: 464

Re: Pushrod Issues

Gene,
On Kelly's Falcon we did enlarge the pushrods holes a bit...well we actually just tapered them from the top so the pushrod would clear.
We're also using "stock" size pushrods.

Later,
Will
by Does10s
Fri Apr 06, 2018 10:16 am
Forum: Events & Shows
Topic: AZ Inliners get together April 14th
Replies: 9
Views: 622

Re: AZ Inliners get together April 14th

Bummer Rich!
Kelly and I will be in the Phx. area that weekend for AZ Bike Week, but on Sat. we'll be at the ZZ Top concert out at Westworld!
So we'll have to miss another one!
Later,
Will
by Does10s
Tue Jan 02, 2018 10:22 am
Forum: 144-250 "Small Block" Six Performance
Topic: Gear drive for a 200
Replies: 18
Views: 1744

Re: Gear drive for a 200

Has anyone been able to adapt something to make a gear drive timing set for a 200? Yes. Back in the day, a guy named Mike made some. Not Mike, AzCoupe, but a guy in Sonoma, CA CI was supposed to sell them but there was some kind of falling out. They did sound good! I can confirm that AZCoupe did ha...
by Does10s
Mon Oct 23, 2017 10:44 am
Forum: 240-300 "Big Block" Six Performance
Topic: Big Six aluminum head update 9-14
Replies: 188
Views: 72561

Re: Big Six aluminum head update 9-14

I talked to those LS V12 guys last year at SEMA. Initially they were interested in making a head for my '64 Econoline dragtruck project, but after a few emails they dropped off the face of the earth!
As of last year, their heads were just welded up LS stockers.

Will
by Does10s
Wed Sep 27, 2017 10:13 am
Forum: 1320 Crowd & More
Topic: Nostalgia Comp Eliminator
Replies: 9
Views: 1912

Re: Nostalgia Comp Eliminator

Congrats Greg!
Nice video!

Will
by Does10s
Thu Dec 22, 2016 1:28 pm
Forum: Announcements
Topic: FordSix Graphic
Replies: 47
Views: 7421

Re: FordSix Graphic

Totally didn't get Falcon out of that! Obvious now of course!

How about a "Mr. Inline" somewhere?

Will
by Does10s
Thu Dec 22, 2016 9:12 am
Forum: Announcements
Topic: FordSix Graphic
Replies: 47
Views: 7421

Re: FordSix Graphic

Very nice! I like it!

My only comment, what's the significance of the Hawk/Eagle?
Mike was WAY into Cats! To much in fact!

Also better check with Dave Schjeidahl on using his book in there!
Will
by Does10s
Thu Nov 10, 2016 9:22 am
Forum: engine tech
Topic: Roller timing chain on a 250
Replies: 47
Views: 7340

Re: Roller timing chain on a 250

Mike1157, Funny that this is the first time I've seen this tread!! It's been here for 2 years and it just got bumped to the "new posts". I would've commented on your timing chain way back when for sure! Nice to see someone else give that a try! I assume it was a success? The one in Kelly's...
by Does10s
Wed Sep 28, 2016 10:06 am
Forum: 144-250 "Small Block" Six Performance
Topic: Is there a good forged alternative rod out there for a 250?
Replies: 17
Views: 2156

Re: Is there a good forged alternative rod out there for a 2

Just to be clear....our "carnage" wasn't caused by a failed connecting rod! It was caused by a cyl. wall that broke at around 4500rpm or so. The piston rings for that hole then got jammed and then the train wreck started to happen. Hence all of the broke or bend rods! We spin Kelly's 250 t...
by Does10s
Thu Aug 18, 2016 10:18 am
Forum: Announcements
Topic: Fordsix Reunion 2016
Replies: 10
Views: 1948

Re: Fordsix Reunion 2016

Kelly and I won't be able to make it this year!

Later,
Will
by Does10s
Fri Jun 17, 2016 2:46 pm
Forum: The Saloon
Topic: Ride along in Phoenix
Replies: 4
Views: 1031

Re: Ride along in Phoenix

Kelly should give him a ride in her Falcon! Probably scare the Bejesus out of him!! :shock:

Will
by Does10s
Tue Apr 26, 2016 2:49 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Headers (200 six)
Replies: 22
Views: 2820

Re: Headers (200 six)

If you ask me....I think those Speed Daddy ones ARE the CI headers!

Or they totally copied them from CI.

And before you ask...I do not know who Mike was getting his headers from.

Later,
Will
by Does10s
Sat Mar 26, 2016 11:52 pm
Forum: 1320 Crowd & More
Topic: AZ Inliners race at Wild Horse Pass Park
Replies: 15
Views: 2421

Re: AZ Inliners race at Wild Horse Pass Park

Hey Crosley,
We understand. We're just giving you a friendly hard time! :D

Later,
Will
by Does10s
Fri Mar 25, 2016 2:35 pm
Forum: 1320 Crowd & More
Topic: AZ Inliners race at Wild Horse Pass Park
Replies: 15
Views: 2421

Re: AZ Inliners race at Wild Horse Pass Park

Kelly's Falcon is full street trim too! 8)

Will
by Does10s
Tue Feb 02, 2016 9:40 am
Forum: 144-250 "Small Block" Six Performance
Topic: 250 double roller timing chain kit supply and demand
Replies: 63
Views: 4438

Re: 250 double roller timing set

"...turning down the crank to match SBF…" I missed the detail on how to prevent an oil leak from the back of the component when narrowing this diameter. Would the cutter on the lath stop in a position that would leave the back of the snout 'fat enuff" ? I understood a second piece wa...
by Does10s
Sun Oct 18, 2015 11:59 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: 66sprint6's Boosted Inline still alive and doin well!
Replies: 131
Views: 18782

Re: 66sprint6's Boosted Inline still alive and doin well!

Looking good Matt!
Keep up the good work!
Will
by Does10s
Wed Sep 30, 2015 2:30 pm
Forum: Aluminum Cylinder Head
Topic: Aluminum Head
Replies: 2
Views: 3549

Re: Aluminum Head

Alex,
Yes we still have a few heads available.
Please email me at:
nocancr@msn.com

...and we can discuss from there.

Later,
Will
by Does10s
Thu Aug 27, 2015 2:58 pm
Forum: 144-250 "Small Block" Six Performance
Topic: 250 2V Blower intake
Replies: 7
Views: 1194

Re: 250 2V Blower intake

82F100 wrote:chad, the 250 2V is the 250 from Aus. with the separate intake manifold. There are several here in the states, this is also the same pattern as the Classic Inlines Aluminum heads.


The intake runner spacing isn't exactly the same between the Oz intake/head and the CI intake/head.

Will
by Does10s
Wed Aug 26, 2015 10:34 am
Forum: Aussie Ford Sixes
Topic: Does the universal carb fit NZ XY engine?
Replies: 5
Views: 2142

Re: Does the universal carb fit NZ XY engine?

Roath, After Mike's death, his family ask us to help them at least sell off his inventory. So we have those carbs on hand if you want one...or three! Please email us at: nocancr@msn.com ...to work out the details. Please don't use the ClassicInlines website for ordering parts. Just use it for refere...
by Does10s
Wed Aug 26, 2015 10:24 am
Forum: Announcements
Topic: August 29th AzCoupe celebration get together.
Replies: 53
Views: 10491

Re: August 29th AzCoupe celebration get together.

65coupei6 wrote:Will: If you have a double roller timing chain and a 4V carb adaptor bring them with you. I will pick them up there.


I'll load those up!

Will
by Does10s
Tue Aug 25, 2015 10:31 am
Forum: Announcements
Topic: August 29th AzCoupe celebration get together.
Replies: 53
Views: 10491

Re: August 29th AzCoupe celebration get together.

Cool,look forward to seeing you guys.I think mine will still be in hiding. Come on Rich....what's the deal? Don't you live 4 miles or so from the car show site? If it ran you could probably drive it there without getting pulled over!! Anybody need some CI parts delivered FREE to the car show? See y...
by Does10s
Mon Aug 24, 2015 12:59 am
Forum: Announcements
Topic: August 29th AzCoupe celebration get together.
Replies: 53
Views: 10491

Re: August 29th AzCoupe celebration get together.

Kelly and I are looking forward to seeing everyone! Should be fun!

We're bringing Kelly's Falcon up with the old POS engine installed. Hopefully it doesn't spit parts all over Bell Road somewhere!

See everyone in a few days!
Later,
Will
by Does10s
Mon Aug 17, 2015 10:54 am
Forum: Announcements
Topic: August 29th AzCoupe celebration get together.
Replies: 53
Views: 10491

Re: August 29th AzCoupe celebration get together.

Kelly and I will be there! We'll still working on which vehicle to bring up. It all matters if we get a hold of Mike's Family so we can pick up some more parts! If that's the case we'll be in our F150. If not, probably the SVO. Or if Kelly's Falcon still has it's current engine installed, then maybe...
by Does10s
Mon Apr 20, 2015 10:32 am
Forum: Announcements
Topic: new order placement question
Replies: 72
Views: 17128

Re: new order placement question

Steve, To Mike's family, this forum isn't even on their radar as a priority. In fact, I'm not even sure they know it exists. So currently your Moderators and Admins are working very hard to keep it functioning on a day to day basis. There are literally a hundred requests for new Users daily. Unfortu...
by Does10s
Sat Mar 28, 2015 9:09 pm
Forum: The Saloon
Topic: R. I. P. AzCoupe
Replies: 42
Views: 9543

Re: R. I. P. AzCoupe

We in the the Inline Six community lost a true pioneer yesterday. Ak Miller, Jack Clifford and Mike Winterboar have been the true innovators in our little, niche hobby. On a personal side, Kelly's Falcon wouldn't be nearly as fast without the endless work that Mike put forth. We met Mike personally ...
by Does10s
Thu Mar 19, 2015 10:06 am
Forum: 144-250 "Small Block" Six Performance
Topic: Best Family 4x4 Platform for 200ci & Alum head
Replies: 19
Views: 4044

Re: Best Family 4x4 Platform for 200ci & Alum head

How about one of those older 4 door, full size Broncos? They called them Centurions.

http://www.fourdoorbronco.com/board/sho ... outh-shore)

Will
by Does10s
Thu Mar 05, 2015 9:13 am
Forum: Turbo, Supercharger, and Nitrous
Topic: What size inlet/outlet are on your intercoolers?
Replies: 8
Views: 1687

Re: What size inlet/outlet are on your intercoolers?

I used 2.5" in and 2.5" out for the intercooler on Kelly's Falcon. The piping between the turbo and IC is 2.5". The piping after the IC and to the throttlebody is 3".

I agree with you that a 2.5" pipe in the engine bay looks too small!
Later,
Will
by Does10s
Mon Dec 08, 2014 9:28 am
Forum: 1320 Crowd & More
Topic: Drag race during the Inliners International 2016 Convention
Replies: 32
Views: 5811

Re: Drag race during nthe Inliners International 2016 Conven

Yes I do!
But I doubt they'd kick up for some diesel for the RV!
Will
by Does10s
Thu Dec 04, 2014 9:00 am
Forum: 1320 Crowd & More
Topic: Drag race during the Inliners International 2016 Convention
Replies: 32
Views: 5811

Re: Drag race during nthe Inliners International 2016 Conven

Hmmm....might be fun!

Ohio is a long tow for us though!

But keep us posted!

Will
by Does10s
Tue Sep 24, 2013 3:15 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Mini starter recommendation - 250/case fill C-4/157 tooth FP
Replies: 3
Views: 599

Re: Mini starter recommendation - 250/case fill C-4/157 toot

We use a starter from a 3.8L Mustang V6 ,'94-'98 are the years I think. Bolts right up and weighs 8lbs. less than a "standard" one.

Later,
Will
by Does10s
Sun Dec 02, 2012 11:31 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Copper Head Gasket For a 200 Turbo
Replies: 8
Views: 1296

Re: Copper Head Gasket For a 200 Turbo

PM'd ya back! Sorry it's a little late.......work is sucking the life out of me! GasketWorks has done a very good job with our stuff. I had them change the water jacket steam holes to just that....holes. Both Felpro and Corteco have large triangles for some of those holes. I wanted more surface area...
by Does10s
Mon Nov 05, 2012 1:40 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Choosing a Carb for Boost
Replies: 21
Views: 3029

Re: Choosing a Carb for Boost

One70six, For the blow-thru carb mods do search for "hanger18fabrication". It's all explained in there. I did most of the mods to our 350 Holley. I still have that carb but it's trashed! The E85 pretty much ate everything up! Just one of the reasons we switched to EFI. The main things to r...
by Does10s
Thu Aug 30, 2012 10:29 am
Forum: Fuel Injection - Mega Squirt
Topic: Turbo 200 Build - EFI
Replies: 8
Views: 2333

Re: Turbo 200 Build - EFI

We're using a Simple Digital Systems (SDS) setup in Kelly's Falcon now. Works very well! Easy to tune, no laptop required, easy to install (although we were already setup from a fuel line standpoint!). The hardest part was fab'ing up a bracket to hold the crank trigger. Here's their link. http://www...
by Does10s
Tue Aug 21, 2012 10:23 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Turbo 200 Build - Bottom End
Replies: 4
Views: 1487

Re: Turbo 200 Build - Bottom End

You can do it yourself. Summit and Jegs sell it. But in our case I've had our machine shop put it in. Mainly because they already have the block for baking and machining. Hardbloc is basically....concrete! It even looks about the same. It gets poured into the water jackets, usually thru the coolant ...
by Does10s
Mon Aug 20, 2012 9:45 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Turbo 200 Build - Bottom End
Replies: 4
Views: 1487

Re: Turbo 200 Build - Bottom End

Stock rods can handle a bunch of abuse. We've never broken a rod....yet! We've cracked cyl. walls that led to broken rods, but it wasn't the rods fault. But we now run 4.6L rods from Manley. But mainly just becuase they're a little longer than a stock 250 rod. Forged pistons are not required either,...
by Does10s
Mon Aug 13, 2012 9:47 am
Forum: 144-250 "Small Block" Six Performance
Topic: Valve lash and idle
Replies: 4
Views: 650

Re: Valve lash and idle

There isn't any valve lash with hydraulic lifters. With the piston at TDC, and the rocker arm adjuster loose, tighten down the rocker arm adj. until you just feel a little drag when you rotate the pushrod. Then tighten another 3/4 of a turn. Tighten the jam nut. You're done. Other than you have 11 m...
by Does10s
Thu Aug 09, 2012 9:59 am
Forum: 144-250 "Small Block" Six Performance
Topic: 250ci+
Replies: 13
Views: 1507

Re: Here's an article on Mike's McLearran built engine

Looks like this one has 273 ci http://www.mustangandfords.com/techarticles/engine/mufp_0711_turbo_charged_six_cylinder_mustang/viewall.html Wicked cool. Been trolling on here for nearly a year. Nice to meet you fellas. That's Does10s. Yup! That's me! The one with his back to the camera! Will
by Does10s
Wed Aug 08, 2012 10:12 am
Forum: 144-250 "Small Block" Six Performance
Topic: 250ci+
Replies: 13
Views: 1507

Re: 250ci+

I have a 250 crankshaft that has been offset ground to fit a Mitsubishi rod. If I recall the stroke is 4.27 inch. That's up from the stock 3.91. But we'll probably never use it. To weak I think. The rod bearing journals are so small, the stroke so large, that the rod journals are "outside"...
by Does10s
Thu Jun 14, 2012 11:25 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Choke removal for blowthrough?
Replies: 16
Views: 2958

Re: Choke removal for blowthrough?

First Fox, I don't have any experience with leaving the choke in. I've always removed them. And even in winter, I've never needed the choke with a blow-thru setup. Granted I live in Tucson, AZ so it only gets down to the mid-20's F during the winter. Usually not that cold. I would think that the cho...
by Does10s
Tue May 08, 2012 2:29 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: New guy with turbo 200 question
Replies: 26
Views: 3692

Re: New guy with turbo 200 question

Copper
by Does10s
Tue May 08, 2012 2:27 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Copper head gaskets
Replies: 14
Views: 1478

Re: Copper head gaskets

What's the thickness of the copper head gasket compared to the original steel shim or modern composite? They can be made in varying thicknesses. Most guys are looking for thin gaskets so they don't have to mill their heads...I am looking for the opposite. Something thicker than .050 to reduce my co...
by Does10s
Mon May 07, 2012 10:02 am
Forum: Turbo, Supercharger, and Nitrous
Topic: New guy with turbo 200 question
Replies: 26
Views: 3692

Re: New guy with turbo 200 question

Guess I'd better chime in here! Kelly's "bottom end" isn't stock. Manley forged rods, JE forged pistons, custom "turbo" friendly cam, modified crank to accept a SBF timing set, o-ringed block, 1/2" head studs, Hardbloc half filled water jackets. I think that's about it. We u...
by Does10s
Wed May 02, 2012 10:34 am
Forum: 144-250 "Small Block" Six Performance
Topic: degreeing a cam - how to adjust the "key"
Replies: 4
Views: 647

Re: degreeing a cam - how to adjust the "key"

Assuming you have a 200 or smaller engine. Classic Inlines sells a multi-indexed roller timing chain for your engine. Just use that and you can set your cam timing up properly. If you have a 250...you're screwed! Or you can do some fabrication work and make a SBF timing set work. But it's not easy! ...
by Does10s
Tue May 01, 2012 9:36 am
Forum: 144-250 "Small Block" Six Performance
Topic: Copper head gaskets
Replies: 14
Views: 1478

Re: Copper head gaskets

Interesting..... I didn't check the website. Just pulled it from my Favorites. I haven't had the need to purchase another gasket from him in a while! They last a long time! Even when we've had the head off a bunch of times! Now I'll have to go and find another vendor! I'll need a 300 gasket soon! La...
by Does10s
Mon Apr 30, 2012 9:41 am
Forum: 144-250 "Small Block" Six Performance
Topic: Copper head gaskets
Replies: 14
Views: 1478

Re: Copper head gaskets

http://www.gasketworks.com

Mordy is the owner. He's the one that makes our gaskets for us.

Later,
Will
by Does10s
Thu Apr 19, 2012 9:41 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Thinking about adding nitrous to 200 cid engine
Replies: 9
Views: 1990

Re: Thinking about adding nitrous to 200 cid engine

While manual control will obviously work, it won't be consistant. I used two switches wired in series. One was the "arming switch" in the cockpit, the other was on the throttle linkage up by the carb (or throttle body in my case!). I had the throttle one set to turn on just before WOT. The...
by Does10s
Tue Apr 17, 2012 9:50 am
Forum: 240-300 "Big Block" Six Performance
Topic: Oil filter stud
Replies: 12
Views: 2312

Re: Oil filter stud

StrangeRanger wrote:If you don't care about the condition it's in after you remove it, a pair of Vise-Grips makes a dandy removal tool :lol:


Or cut a slot across the stud. Then insert a thin piece of metal and spin it out. A little thread clean up and it's usable again.

Later,
Will
by Does10s
Tue Apr 17, 2012 9:45 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Thinking about adding nitrous to 200 cid engine
Replies: 9
Views: 1990

Re: Thinking about adding nitrous to 200 cid engine

Crosley, I've used nitrous for years before I found religion and went turbo! The big thing to remember it to pull timing out when on the bottle. A couple of MSD products can do this for you. I used a MSD Digital 6 for this. You'll need a "wet" kit so it'll add fuel too. And enough fuel pum...
by Does10s
Tue Feb 14, 2012 8:49 am
Forum: Electrical, Audio, and Electronics
Topic: Wiring Harness Upgrade
Replies: 15
Views: 3287

Re: best wiring company

We put a Painless Universal 12 circuit into Kelly's Falcon a few years ago. I'd recommend them for sure. I'll be buying another one for my Econoline Pickup soon! It's worked great! We were able to add in the SDS EFI System easy enough. We haven't had any issues with it at all. The directions (yes I ...

Go to advanced search