Search found 298 matches

by dagenham
Sun Jun 17, 2018 7:48 am
Forum: 144-250 "Small Block" Six Performance
Topic: 1V Phenolic spacers
Replies: 14
Views: 243

Re: 1V Phenolic spacers

Cheap cutting boards are made of softer material. That's why they warp. You have to use hardwood like maple or ash. My dad does a lot of wood working as a hobby and has plenty of scraps that I can use. Did some quick searching last night and found a lot of different kinds of phenolic material. Left ...
by dagenham
Sat Jun 16, 2018 11:49 am
Forum: 144-250 "Small Block" Six Performance
Topic: 1V Phenolic spacers
Replies: 14
Views: 243

Re: 1V Phenolic spacers

Thanks for the tips. I think I'll do some shopping around before making another wooden.
by dagenham
Fri Jun 15, 2018 9:34 pm
Forum: 144-250 "Small Block" Six Performance
Topic: 1V Phenolic spacers
Replies: 14
Views: 243

1V Phenolic spacers

Been a long time since I've posted anything on here. My 66 Mustang started running bad on my way home from work. Would not idle at a stop sign but started right back up. I discovered the wooden carb spacer split for whatever reason. Can't complain to much because its been on for a while. So is there...
by dagenham
Thu Mar 01, 2018 10:04 pm
Forum: Mustang Corral
Topic: Anyone ever have any trouble with CJ Pony Parts?
Replies: 6
Views: 1269

Re: Anyone ever have any trouble with CJ Pony Parts?

This seems to be the norm with them. Did you ever get your parts from them or did you have to go elsewhere?
by dagenham
Thu Mar 01, 2018 9:53 pm
Forum: Transmission & Drivetrain
Topic: Will this 4Spd bolt up to my 63 Falcon 144CI?
Replies: 7
Views: 453

Re: Will this 4Spd bolt up to my 63 Falcon 144CI?

Am I missing something in the pics. Because I only see two rods meaning it is only a 3 speed.
by dagenham
Sun Jan 29, 2017 9:15 pm
Forum: 144-250 "Small Block" Six Performance
Topic: 8.5 inch flywheel turning
Replies: 12
Views: 1155

Re: 8.5 inch flywheel turning

I asked that question on here several years ago and NOBODY ever answered me.
by dagenham
Sun Jan 29, 2017 5:12 pm
Forum: 144-250 "Small Block" Six Performance
Topic: 8.5 inch flywheel turning
Replies: 12
Views: 1155

Re: 8.5 inch flywheel turning

Where did you find the stock depth for the flywheel? I have been trying to figure it out for years. I couldn't even find it in the Ford shop manuals.
by dagenham
Thu Feb 11, 2016 9:04 pm
Forum: Transmission & Drivetrain
Topic: 2.77 3speed transmission lost top cover ):
Replies: 4
Views: 799

Re: 2.77 3speed transmission lost top cover ):

Are you still in need of a cover? I used to have a whole trans laying around. I will have to look and see if I have the cover.
by dagenham
Thu Mar 19, 2015 5:13 pm
Forum: 144-250 "Small Block" Six Performance
Topic: What's the latest on flat tappet cam oil?
Replies: 26
Views: 7269

Re: What's the latest on flat tappet cam oil?

I don't believe the Rotella has what is needed anymore due to the new diesels having emissions on them now also. I will look at a bottle of it tomorrow at work and see what it says.
by dagenham
Thu Dec 18, 2014 7:58 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Air breather intake volume question
Replies: 6
Views: 722

Re: Air breather intake volume question

The easiest thing to make the fresh air tubing might be to use Spectre brand tubing.
by dagenham
Thu Oct 31, 2013 9:22 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Fuel pump rebuild
Replies: 1
Views: 324

Fuel pump rebuild

Does anyone know of a kit to rebuild the factory fuel pumps???
by dagenham
Wed Oct 02, 2013 10:28 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Mikuni HSR?
Replies: 9
Views: 794

Re: Mikuni HSR?

You could in theory keep the factory head and mill off the log part keeping only the runners themselves.
Fabricate a tubular intake to mate up with the runners and put a rubber connector between the two.
Sorry, thinking too hard again.
by dagenham
Mon Sep 16, 2013 9:28 pm
Forum: Body, Paint, & Interior
Topic: Fox body seats
Replies: 0
Views: 1319

Fox body seats

I picked up a well used pair of '84 GT seats a few weeks ago for a '68 project I am working on. I wasn't sure how they were going to fit, but it turns out the '68 seat track will bolt right on to the bottom of the '84 frame. The only things I had to do was a drill a new hole in the underside of the ...
by dagenham
Tue Sep 03, 2013 10:26 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Cracked blocks common?
Replies: 6
Views: 591

Re: Cracked blocks common?

If I'm seeing the pics correctly, it looks like there are two different areas with JB weld on them.
The big crack /fix looks like someone torqued a w/p bolt to tight or broke it off.
IIRC that is a thin spot on the side of the block.
by dagenham
Mon Sep 02, 2013 9:07 pm
Forum: Transmission & Drivetrain
Topic: Bellhousing to C-4 case fill transmission (pump) bolts
Replies: 3
Views: 569

Re: Bellhousing to C-4 case fill transmission (pump) bolts

Do you have the two of them to set side by side for comparison to measure the thickness where the bolts go thru???
by dagenham
Wed Aug 21, 2013 10:01 pm
Forum: Transmission & Drivetrain
Topic: flywheel depth spes
Replies: 1
Views: 443

flywheel depth spes

If this has been answered in another thread I apoligize. Does anyone have a depth measurement for the 8-1/2" flywheel from the clutch plate surface to the top where the pressure plate bolts on??? I have looked thru the Ford shop manual and could not find it anywhere. I want to turn my flywheel ...
by dagenham
Thu Aug 15, 2013 4:55 pm
Forum: Body, Paint, & Interior
Topic: looking for cheep vent glass seals
Replies: 3
Views: 1505

Re: looking for cheep vent glass seals

You will be further ahead and much happier. :D
by dagenham
Mon Aug 12, 2013 10:55 pm
Forum: Body, Paint, & Interior
Topic: looking for cheep vent glass seals
Replies: 3
Views: 1505

Re: looking for cheep vent glass seals

If your hoping tp find some good used ones, I doubt that will happen. I dont even know if they can be removed without being damaged beyond reuse.
by dagenham
Mon Aug 12, 2013 10:39 pm
Forum: 144-250 "Small Block" Six Performance
Topic: camshaft recognition
Replies: 14
Views: 1109

Re: camshaft recognition

For some reason it looks like Ford actually did put the red paint on the springs at the factory. Mine was the same way and I am 99.9% sure that my engine was never apart until I rebuilt it.
by dagenham
Sun Aug 04, 2013 9:08 pm
Forum: Mustang Corral
Topic: Lokar accelerator in a '66
Replies: 5
Views: 1758

Re: Lokar accelerator in a '66

I would contact Lokar and ask their opinion. I think they have some setups that are made more or less for "muscle" cars like yours.
by dagenham
Sun Jul 21, 2013 9:13 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Mustang Monthly article on Alum hean in stall.
Replies: 93
Views: 7776

Re: Mustang Monthly article on Alum hean in stall.

OK, thanks, I was going to be mad if I missed it.
by dagenham
Sun Jul 21, 2013 10:57 am
Forum: 144-250 "Small Block" Six Performance
Topic: Mustang Monthly article on Alum hean in stall.
Replies: 93
Views: 7776

Re: Mustang Monthly article on Alum hean in stall.

I dont subscibe but I normally pick an issue up every month at the store, but I have not seen an article yet about the head install.
Did I miss it, or is it not out yet??
by dagenham
Sun Jul 07, 2013 10:39 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Carb insulating spacer / shield Opinoins?
Replies: 9
Views: 520

Re: Carb insulating spacer / shield Opinoins?

Laugh or say what you want, but I have a plywood spacer under my 1100 1v to help with vapor lock. I also have one under an Edelbrock 4V carb on a 351 windsor. I havent had a vapor lock on either car sinc I put them on. If you know anyone that was around the old flatheads back in the day they used th...
by dagenham
Mon May 06, 2013 9:33 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Looking for help/insight tuning the 390 Holley
Replies: 11
Views: 1080

Re: Looking for help/insight tuning the 390 Holley

I had one on a 2.3 Ford that I built.
by dagenham
Mon May 06, 2013 8:43 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Looking for help/insight tuning the 390 Holley
Replies: 11
Views: 1080

Re: Looking for help/insight tuning the 390 Holley

I was never impressed with the 390 I had fromday I put one either.
by dagenham
Sun Apr 21, 2013 9:04 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Options for removing a recalcitrant broken bolt?
Replies: 10
Views: 633

Re: Options for removing a recalcitrant broken bolt?

After using every trick in the book, I still couldnt get the broken w/p bolt out and ended up pulling the engine and taking it to a machine shop to get the bolt removed and the threads repaired. (actually IIRC they had to put a thread insert in)
by dagenham
Thu Apr 18, 2013 10:37 pm
Forum: Transmission & Drivetrain
Topic: Problems with a TF170FT...
Replies: 5
Views: 534

Re: Problems with a TF170FT...

Hard to tell without actually hearing it in person.
by dagenham
Tue Apr 16, 2013 7:44 pm
Forum: Transmission & Drivetrain
Topic: Problems with a TF170FT...
Replies: 5
Views: 534

Re: Problems with a TF170FT...

Did you ever take the trans out and check the TO bearing?? If it is getting worse it may be causing your shifting problem along with wiping out the clutch assembly.
by dagenham
Tue Apr 16, 2013 7:38 pm
Forum: 144-250 "Small Block" Six Performance
Topic: oil pan gaskets
Replies: 9
Views: 602

Re: oil pan gaskets

I still like good old Permatex Indian head shellac. I've never had a gasket leak when using that stuff, but the down side to the stuff is if you have to remove the gasket. It does not not come off clean. You have to use a wire bruch or a some kind of scotch brite wheel on a drill.
by dagenham
Fri Apr 12, 2013 8:46 pm
Forum: Transmission & Drivetrain
Topic: Oops trans question
Replies: 8
Views: 742

Re: Oops trans question

Yes you will need a flywheel and bellhousing to match.
by dagenham
Fri Apr 12, 2013 7:19 pm
Forum: Transmission & Drivetrain
Topic: 9 in. rear axle bearings.......
Replies: 2
Views: 1150

Re: 9 in. rear axle bearings.......

My '84 F-150 had a 10" rear and they look like a 9" rear. The seal was leaking and the bearing and retaining ring had to be pressed off to get to the seal.
by dagenham
Fri Apr 12, 2013 7:11 pm
Forum: Transmission & Drivetrain
Topic: Oops trans question
Replies: 8
Views: 742

Re: Oops trans question

With the 6 bolt you can put in the toploader and get a 9 inch clutch. A 10 inch clutch was available but that is for the V8
IIRC both the 3 speed and the 4 speed have the 9 inch clutch.
by dagenham
Sun Mar 31, 2013 7:01 pm
Forum: Brakes, Wheels, and Tires
Topic: does 9inch 6cyl mustang drums uses cylinder wheel link pin ?
Replies: 21
Views: 3799

Re: does 9inch 6cyl mustang drums uses cylinder wheel link p

The picture of the two pieces you have there is only part of the whole part. They are the ends that slip on for the star wheel end of the adjuster. When you put them on put some white lithium grease or equivalent to keep them moving freely.
by dagenham
Sun Mar 31, 2013 6:49 pm
Forum: Steering and Suspension
Topic: Rear lower shock bolt
Replies: 4
Views: 1372

Re: Rear lower shock bolt

Something doesnt sound right about your problem. The bottom of the shock on the rear of the car is a stud that you should be able to easily slip a deepwell socket or a wrench on the bottom nut. You will probably have to hold onto the shock itsself or need a pair of channel locks or pipe wrench to ho...
by dagenham
Wed Mar 27, 2013 7:23 pm
Forum: Mustang Corral
Topic: What ignition
Replies: 1
Views: 1291

Re: What ignition

If you already have a Mallory dizzy then I would go with a matching higher energy coil from Mallory to match it.
by dagenham
Wed Mar 27, 2013 7:16 pm
Forum: Transmission & Drivetrain
Topic: Let's talk about 8" rears
Replies: 6
Views: 576

Re: Let's talk about 8" rears

The difference is the size of the bearing at the outer end of the axle shaft.
Most of the smaller tubes are older and the larger ones are newer IIRC.
by dagenham
Wed Mar 27, 2013 7:08 pm
Forum: 144-250 "Small Block" Six Performance
Topic: NOS 144/170 Valve Cover Paint
Replies: 5
Views: 650

Re: NOS 144/170 Valve Cover Paint

I have never seen a valve cover with paint on the inside. If someone is trying to pass off a valvecover as NOS and there is paint on the inside, I would call his bluff and ask for proof.
Paint on the inside would do nothing but cause trouble like you said.
by dagenham
Sat Mar 23, 2013 9:38 pm
Forum: Body, Paint, & Interior
Topic: floor pans
Replies: 3
Views: 1868

Re: floor pans

Sounds like it is fabrication time, unless you can find a donor car with a good trunk.
Since it is a Falcon, you might want to look at the replacement trunk area for the '65-'66 Mustang. I believe the gas tanks are the same size and you may be able to use the area around the opening.
by dagenham
Sat Mar 23, 2013 9:31 pm
Forum: Body, Paint, & Interior
Topic: Getting Close To The End
Replies: 5
Views: 1590

Re: Getting Close To The End

I hope you have the booth sealed off good away from that wood stove, or you do not have it lit when you spray the paint!
Remember paint fumes are very flammable :shock: I would hate to hear about an explosion happening or worse in the middle of your paint job.
by dagenham
Sun Mar 03, 2013 7:52 pm
Forum: Body, Paint, & Interior
Topic: Photos/measurements carpet heel pad w '60-5 Falcon/Ranchero
Replies: 1
Views: 1328

Re: Photos/measurements carpet heel pad w '60-5 Falcon/Ranch

If the heel pad is going up the side of the trans hump a bit that is correct. If that is what you are worried about.
by dagenham
Sat Feb 23, 2013 10:41 pm
Forum: Transmission & Drivetrain
Topic: Which driveshafts?
Replies: 8
Views: 1095

Re: Which driveshafts?

Are you saying the '64 falcon driveshaft does not fit anymore, or dont you have a driveshaft at all to start with???
by dagenham
Sun Feb 03, 2013 8:59 pm
Forum: Body, Paint, & Interior
Topic: New Carpet
Replies: 2
Views: 1416

Re: New Carpet

coupeboy, why dont you have courtesy lights under the dash??? I've never seen a '68 without them there, not to mention how easy it would be to put one in over each footwell.
by dagenham
Thu Jan 17, 2013 6:43 pm
Forum: Transmission & Drivetrain
Topic: RAD mustang II manual transmission
Replies: 6
Views: 1074

Re: RAD mustang II manual transmission

Junk trannies. I had one in a '79 Mustang behind a 2.3 that was modified. Left me with nothing but 3rd and 4th one night about midnite to get home with. They are not well liked by the Fox body community in general.
Keep looking for a t-5.
by dagenham
Sat Dec 29, 2012 12:27 pm
Forum: Transmission & Drivetrain
Topic: Block plate for a 67/68 manual fit a 66 block
Replies: 2
Views: 490

Re: Block plate for a 67/68 manual fit a 66 block

I cant think of any reason why a later block plate wont work. But yes you need to have it.
by dagenham
Wed Dec 26, 2012 8:17 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Thermostat Housing Thread
Replies: 8
Views: 693

Re: Thermostat Housing Thread

I'm confused. You are talking about two different things and neither one of them have any threads in them other than the pipe threads for hose barbs.
The threads in the thermostat housing are 3/8" pipe thread IIRC.
by dagenham
Sun Dec 16, 2012 9:48 am
Forum: Mustang Corral
Topic: Someone put a '65/generator steering wheel on my car
Replies: 5
Views: 1910

Re: Someone put a '65/generator steering wheel on my car

thanks again for teaching me something I did not know. :D
by dagenham
Sun Dec 09, 2012 9:05 pm
Forum: Mustang Corral
Topic: Someone put a '65/generator steering wheel on my car
Replies: 5
Views: 1910

Re: Someone put a '65/generator steering wheel on my car

Is there actualy a difference between a '65 and a '66 steering wheel??? Have you tried to jump the horns directly to the battery and make sure they are working properly??
by dagenham
Sun Dec 09, 2012 8:57 pm
Forum: Brakes, Wheels, and Tires
Topic: Help IDing this wheel (Galaxie?, Falcon?, Fairlane?, Other?)
Replies: 3
Views: 795

Re: Help IDing this wheel (Galaxie?, Falcon?, Fairlane?, Oth

It defineatly looks like a fox body wheel.
by dagenham
Thu Nov 22, 2012 11:09 am
Forum: Brakes, Wheels, and Tires
Topic: Tire rub ARRRGGGHHHHHH!!!
Replies: 2
Views: 941

Re: Tire rub ARRRGGGHHHHHH!!!

It sounds to me like the offset of your wheels is not deep enough. How much difference is there between the stock brakes and the SSBC brakes. IIRC the best offset for the factory offset is around 3-1/2 inches. I have also been told and read that a 17 inch wheel fits better than a 16 inch because of ...
by dagenham
Thu Nov 22, 2012 11:00 am
Forum: Brakes, Wheels, and Tires
Topic: disc brakes not returning
Replies: 9
Views: 1220

Re: disc brakes not returning

Most likely it is your caliper, but it could also be the master cylinder not allowing the brake fluid to bleed back.
I am only suggesting this because that was the problem I had at one time.