Search found 94 matches

by Humpbackshooter
Sat Nov 17, 2018 9:13 am
Forum: Steering and Suspension
Topic: Upper A-arm Ball Joints
Replies: 0
Views: 15

Upper A-arm Ball Joints

Can anyone quote the specs for the bolts that hold the upper ball joint on? The shop manual....I can't find it. Says to look in "Part 3-6, Spec." I can't find it. Also, whats the difference between the power steering idle arm and a manual steering idle arm? Looks like the "PS" ar...
by Humpbackshooter
Thu Nov 08, 2018 5:14 pm
Forum: Steering and Suspension
Topic: Upper A-arm SHAFT bushings
Replies: 4
Views: 145

Re: Upper A-arm SHAFT bushings

Bubba....that is correct on the specs for the shaft to frame. I found a web site (http://dazecars.com/dazed/UCA.html) that has a very good teardown and rebuild. Some good stuff on this site too. He also said to tighten so so, but no specs.

Thanks,
Phil
by Humpbackshooter
Thu Nov 08, 2018 9:14 am
Forum: Forum Issues Only
Topic: Must keep logging in
Replies: 0
Views: 47

Must keep logging in

In doing some searching....everytime I click on a post, it comes up in the new version of the web site and I have to log in again. After i log in...it goes back to the old style web page. logging in get to be a problem :bang: Is this a site problem or is it my web browser OR my company IT issues? Th...
by Humpbackshooter
Thu Nov 08, 2018 8:52 am
Forum: Steering and Suspension
Topic: Upper A-arm SHAFT bushings
Replies: 4
Views: 145

Re: Upper A-arm SHAFT bushings

Thanks Ron for getting back. I looked the INTERNET over and couldn't find anything other than some saying 100-125FtPds. AND some said as you said.....nice and tight....and then put a tack weld on them. :shock:

Thanks,
Phil
by Humpbackshooter
Fri Oct 26, 2018 1:25 pm
Forum: Steering and Suspension
Topic: Upper A-arm SHAFT bushings
Replies: 4
Views: 145

Upper A-arm SHAFT bushings

Hope one of guys here can help me out. Looking for the torque specs. for the bushings/end caps on the upper A-arm. I have got it ready to put back together and was going over torque setting and can not find what these are to be set at. I have looked through my shop manual for these setting but can't...
by Humpbackshooter
Fri Sep 07, 2018 5:43 pm
Forum: Brakes, Wheels, and Tires
Topic: Brake Line Complete Kits
Replies: 4
Views: 237

Re: Brake Line Complete Kits

Bubba,
Straps with a rubber insert that goes through the hole in the undercarriage. Flap head screwdriver and they came right out. Sandblasted them at work and now got to put a little paint on them and their good a new. :beer:

Hump
by Humpbackshooter
Thu Sep 06, 2018 9:09 am
Forum: Brakes, Wheels, and Tires
Topic: Brake Line Complete Kits
Replies: 4
Views: 237

Re: Brake Line Complete Kits

Bubba....when it comes to removing the front to back line, the clamps that are holding both the brake and the fuel lines, was yours screwed in or was there something like a push lock? ( for better word) Mine doesn't have any head or Phillips in it. Now I have not looked up in the car where it looks ...
by Humpbackshooter
Sat Sep 01, 2018 1:22 pm
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

Thanks, Bubba. That's what I needed to know.

Hump.


P.M. sent
by Humpbackshooter
Fri Aug 31, 2018 3:00 pm
Forum: Brakes, Wheels, and Tires
Topic: Brake Line Complete Kits
Replies: 4
Views: 237

Brake Line Complete Kits

Any of yall purchased a kit for a complete brake line assy? Front lines, front to rear and rear from block to R. rear and L rear. Mine seems to be a bit dirty and after reading....just plan on replacing all lines for the peace of mind. :beer: :nod:

Hump.
by Humpbackshooter
Fri Aug 31, 2018 2:49 pm
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

O.K. Got my bushings in the other day. Installed the back 8 pcs. Now got to install the front. Only thing is.....both bushing seem a bit to big. No problem. BUT....... When I removed the old ones, there was a outer sleeve that didn't come out. Is it suppose to be there or is it part of the old bushi...
by Humpbackshooter
Sat Aug 25, 2018 8:58 pm
Forum: Steering and Suspension
Topic: 67 Mustang RearEnd
Replies: 1
Views: 182

67 Mustang RearEnd

I'll try and post them in a new topic.....Nope won't let me. Admins need to check into this. Same pop-up :x

Hump.
by Humpbackshooter
Sat Aug 25, 2018 8:16 pm
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

tried to post pics again......same thing. Sorry

Hump.
by Humpbackshooter
Thu Aug 23, 2018 9:02 am
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

Error,
Sorry, the board attachment quota has been reached.
What does this mean?
by Humpbackshooter
Thu Aug 23, 2018 8:54 am
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

Well, its not letting me upload the pics now. Something about the quote is full??????

Hump
by Humpbackshooter
Thu Aug 23, 2018 8:49 am
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

This is the progression of the rear end.....
by Humpbackshooter
Wed Aug 22, 2018 1:23 pm
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

65.... I'll try and get some posted up.

Hump
by Humpbackshooter
Tue Aug 21, 2018 10:18 am
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

65 coup.......is that that the way they came from the factory? Wonder why the manual shows this? It does say that this is "Typical".

Thanks,
Hump
by Humpbackshooter
Tue Aug 21, 2018 10:07 am
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

Thanks Bubba. I going to put it back together as I found it. (just like the Pic). When I pulled it all apart.....I didn't recall any bushings OR pieces of bushings between the spring and the spring plate. I was thinking that maybe the bushing may have worn out and came out. BUT looking at the spring...
by Humpbackshooter
Thu Aug 16, 2018 6:27 pm
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

pic of spring
by Humpbackshooter
Thu Aug 16, 2018 6:26 pm
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

Re: 67 Mustang Rear Springs

dirgram from the ford manual
by Humpbackshooter
Wed Aug 15, 2018 9:18 am
Forum: Steering and Suspension
Topic: 67 Mustang Rear Springs
Replies: 16
Views: 492

67 Mustang Rear Springs

Need some info. Putting the rear axle and springs back together. Is there suppose to be any rubber inserts between the spring and the spring plates for the shocks? When I pulled the axle out and tore it down, I didn't see any insulators ( I think that's what they are call in the Ford Manual) I'll tr...
by Humpbackshooter
Thu Sep 21, 2017 11:41 am
Forum: Transmission & Drivetrain
Topic: 7.25" Differential Rebuild
Replies: 18
Views: 5228

Re: 7.25" Differential Rebuild

:beer: :beer: to bubba & xctasy


Hump
by Humpbackshooter
Thu Sep 21, 2017 11:38 am
Forum: Transmission & Drivetrain
Topic: Part number help please - 7.25 diff
Replies: 47
Views: 9454

Re: Part number help please - 7.25 diff

xctasy......thanks for moving this up so I can find it. Bubba also pointed this one out too. :D

Hump.
by Humpbackshooter
Tue Sep 19, 2017 9:14 pm
Forum: Transmission & Drivetrain
Topic: 7.25 Rear End
Replies: 9
Views: 1365

Re: 7.25 Rear End

Bubba.....thanks for the shortcut. Good reading and pics along with pt#s. 6......since I have it out where it's easy to work with, I would like to change the bearing too. That will involve messing with the settings of all parts.:-( 62.....Kinda like the pan on the bottom of the trany. :D Hump
by Humpbackshooter
Tue Sep 19, 2017 9:06 pm
Forum: Body, Paint, & Interior
Topic: Frame support
Replies: 15
Views: 2650

Re: Frame support

Here's what I have.

Hump
by Humpbackshooter
Sun Sep 17, 2017 11:18 pm
Forum: Steering and Suspension
Topic: Shackles and leaf spring Bushings
Replies: 2
Views: 719

Re: Shackles and leaf spring Bushings

Thanks 64*5. I'll check my NAPA to see if they got em. Will say this.....ORieley's may be cheaper based on what my brother priced brake calibers for his F150. NAPA wanted close to $100....O's had them for $35/40


Thanks
Hump
by Humpbackshooter
Sat Sep 16, 2017 10:56 pm
Forum: Steering and Suspension
Topic: Shackles and leaf spring Bushings
Replies: 2
Views: 719

Shackles and leaf spring Bushings

Need to replace the bushings for the rear leap springs and shackles. Looking for the best place to pick them up at. Rockauto CJpony ?????? Need the leaf spring bolt for the front leaf socket too. Drivers side came right out. But the passenger side...well it was a #$%&#>&^ to get out. Also ne...
by Humpbackshooter
Sat Sep 16, 2017 10:41 pm
Forum: Body, Paint, & Interior
Topic: Frame support
Replies: 15
Views: 2650

Re: Frame support

Just a follow up to the dollies. The ones down at HF didn't work like I wanted them to. So I found some 1\4" plate at work and ordered some wheels. Well the 1st set of wheels came in and I mounted them to the plate. Put the car on them and the weight of the front end (remember, the motor is sti...
by Humpbackshooter
Sat Sep 16, 2017 10:15 pm
Forum: Transmission & Drivetrain
Topic: 7.25 Rear End
Replies: 9
Views: 1365

Re: 7.25 Rear End

Rinke.....thanks for the info. I cleaned it up today. That's the cleanest its been in oh....maybe 50 yrs. :D I talked with one of the guys at work today and he said that I should go on and replace the bearing and seal. I have gone this far and its out from under the car, now's the time to fix it rig...
by Humpbackshooter
Fri Sep 15, 2017 3:59 pm
Forum: Transmission & Drivetrain
Topic: 7.25 Rear End
Replies: 9
Views: 1365

Re: 7.25 Rear End

Ags......as far as the front bearing seal, can it be changed without getting into the pinion setting? The u_joint yoke nut in the above pic has to come off to get to that seal. Which is the pinion shaft too? Or will/when I remove that nut.....mess with the settings in the chunk?
Hump.
by Humpbackshooter
Fri Sep 15, 2017 3:52 pm
Forum: Transmission & Drivetrain
Topic: 7.25 Rear End
Replies: 9
Views: 1365

Re: 7.25 Rear End

Ags.....Thanks for the reply. 10-4 on the parts. After thinking about this today......i think I'll just clean it up and put it back together. I'll still will change out the wheel bearings. Dealing with the crush ring and preload and all that goes with doing this....... is just something that I'm not...
by Humpbackshooter
Fri Sep 15, 2017 8:25 am
Forum: Transmission & Drivetrain
Topic: 7.25 Rear End
Replies: 9
Views: 1365

7.25 Rear End

How much trouble is it to rebuild this rear end? I have got it pulled, the grease out of it almost and I'm almost ready to pull the axles. NOTE: I'm going to keep this rear end in the car. I know its a weak rear end, but I'm keeping it original as possible. Only pulling the axles so I can have them ...
by Humpbackshooter
Fri Jul 14, 2017 3:27 pm
Forum: Transmission & Drivetrain
Topic: Mustang six rear wheel bearings replacement: heat/chill method
Replies: 4
Views: 1017

Re: Mustang six rear wheel bearings replacement: heat/chill method

Az66....How did the job go?

Hump.


PS.....hope this is not to long of a gap between post.
by Humpbackshooter
Wed Jun 28, 2017 6:23 pm
Forum: Body, Paint, & Interior
Topic: Frame support
Replies: 15
Views: 2650

Re: Frame support

Bubba.....the frame and body are in great shape. So there shouldn't be any problems. Come to think of it....rotisseries do the same thing with out the support in the middle. But there in no motor in the car too. I'll most likely go with the 4 wheel dollies. Pick a couple of set up down @ HF. Then do...
by Humpbackshooter
Sat Jun 24, 2017 8:41 am
Forum: Body, Paint, & Interior
Topic: Frame support
Replies: 15
Views: 2650

Re: Frame support

I was thinking of doing something like this and adding a brace to the front to support the engine.
by Humpbackshooter
Sat Jun 24, 2017 8:19 am
Forum: Body, Paint, & Interior
Topic: Frame support
Replies: 15
Views: 2650

Re: Frame support

My only concern is the weight on the front end. I will still have the engine in the car. Don't want any twisting of the frame.

Hump.
by Humpbackshooter
Sat Jun 24, 2017 8:16 am
Forum: Body, Paint, & Interior
Topic: Frame support
Replies: 15
Views: 2650

Re: Frame support

I like that too "6". I was thinking of something like this though......
by Humpbackshooter
Fri Jun 23, 2017 8:13 am
Forum: Body, Paint, & Interior
Topic: Frame support
Replies: 15
Views: 2650

Re: Frame support

Bubba......is there any pics of these? ill see if Google has any pics.

thanks,

Hump
by Humpbackshooter
Thu Jun 22, 2017 5:28 pm
Forum: Body, Paint, & Interior
Topic: Frame support
Replies: 15
Views: 2650

Re: Frame support

Thanks 6. I like that lift for Northern. I was thinking something along the lines of the 4 wheel dollies. Only with something tied to the frame to keep it stiff.

Hump.
by Humpbackshooter
Thu Jun 22, 2017 1:23 pm
Forum: Body, Paint, & Interior
Topic: Frame support
Replies: 15
Views: 2650

Frame support

Hi fellow horsemen. In the words of.......I don't know who said it but.... there's no stupid questions, only stupid mistakes ....here goes. How do I go about putting my 67 coupe on a rack that can be rolled around and still be able to work under it? I'm getting ready to start a brake conversion for ...
by Humpbackshooter
Sat Nov 26, 2016 6:49 am
Forum: 144-250 "Small Block" Six Performance
Topic: Autolite 1100 question
Replies: 33
Views: 2820

Re: Autolite 1100 question

Chad......got the handbook bout the time AZcoupe passed. I tried to get it from the web site, but thinks were kinda in a mess. Ended up getting from someone else. And yes there's a lot of info in it. Just got to try and get it all straight. Not put the cart before the horse. :D Thanks, Hump/Phil
by Humpbackshooter
Sat Nov 26, 2016 6:42 am
Forum: 144-250 "Small Block" Six Performance
Topic: Autolite 1100 question
Replies: 33
Views: 2820

Re: Autolite 1100 question

Thanks David for that response. That is where mine is connected but I believe I have exhaust gases coming out of it too. ( IF that is true....then I have a busted/broken small log.) I thought that was the correct place for it. I'll have to check it out and see. I'll try and post a pic too. Thanks, P...
by Humpbackshooter
Fri Nov 25, 2016 1:14 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Autolite 1100 question
Replies: 33
Views: 2820

Re: Autolite 1100 question

Thanks Bubba. I'll have to check that out and see. The hole is right under the carb. In the middle of the log. I bet its like you said. Damaged or not there. I was thinking that exhaust gases was used to heat up the choke. That being said...CZLN is right that its not filtered. MY Bad. You can lean a...
by Humpbackshooter
Fri Nov 25, 2016 11:27 am
Forum: 144-250 "Small Block" Six Performance
Topic: Autolite 1100 question
Replies: 33
Views: 2820

Re: Autolite 1100 question

Bubbba.....are you saying that there not suppose to be a pipe that is stuck into the exhaust manifold? That there is a steel tube/sleeve connected to the side (under) of the exhaust and the 2nd pipe is stuck into it and goes to the choke. I was thinking that the hole that's in the exhaust ( a 1/4&qu...
by Humpbackshooter
Fri Nov 25, 2016 9:50 am
Forum: 144-250 "Small Block" Six Performance
Topic: Autolite 1100 question
Replies: 33
Views: 2820

Re: Autolite 1100 question

Thanks Chad for your response. Check that on the tube to the choke. Mine was also a aluminum tube but over the yrs, it had broke off right at the exhaust manifold. So I took a piece 1/4" copper and redid it. As far as the warm air that travels through this tube, its exhaust gases. Correct? That...
by Humpbackshooter
Thu Nov 24, 2016 7:03 pm
Forum: 144-250 "Small Block" Six Performance
Topic: Autolite 1100 question
Replies: 33
Views: 2820

Re: Autolite 1100 question

CZLN6.......I too, have a 200 with the 1100 on it. In reading all the post that I can, I have to ask why in some of your post that you say that the "exhaust tube" for the auto choke is unfilter air? Is that not air that's been pulled in through the carb breather and into the chambers , mix...
by Humpbackshooter
Sat Nov 05, 2016 4:04 pm
Forum: Transmission & Drivetrain
Topic: Rear rebuild
Replies: 5
Views: 1136

Re: Rear rebuild

Anybody got a break-down on this rear end? All the ones I find on the "net"....just don't look right to me. Also.....does NAPA, Autozone have the ring and pinion gear tool to set the correct distance and backlash?

Hump
by Humpbackshooter
Sat Oct 29, 2016 4:58 pm
Forum: Brakes, Wheels, and Tires
Topic: Front Disc Conversion Only
Replies: 22
Views: 3338

Re: Front Disc Conversion Only

Bubba....Thanks again. :beer:

Hump.
by Humpbackshooter
Sat Oct 29, 2016 4:55 pm
Forum: Transmission & Drivetrain
Topic: Rear rebuild
Replies: 5
Views: 1136

Re: Rear rebuild

Bmbm40.......thanks for the info. Right now I still have it mounted to the car. And I have got to get a closer look at the tag. ( being lazy ) The taller gear would be good, but I was going to try and keep it stock as much as possible. I did want to pump it up some but I plan on PS and it came with ...
by Humpbackshooter
Sat Oct 29, 2016 12:04 pm
Forum: Transmission & Drivetrain
Topic: Rear rebuild
Replies: 5
Views: 1136

Re: Rear rebuild

This is for my mustang......67...coupe.....I6-200.....AT.

Hump