Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40, mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry, rzcrisis, DoctorC, jamyers, Motorboy, fastpat, Silverback280, chad, drag-200stang, THE FRENCHTOWN FLYER, Jimmys61falcon, rjonah, Sooshi, Robert92867, Invectivus


PLEASE TEST ON http://dev.fordsix.com

<<<***PLEASE READ*** New Site Update >>>

Search found 4 matches

by Ralfchero
Thu Sep 05, 2019 11:23 am
Forum: Transmission & Drivetrain
Topic: 65 Ranchero pedal assembly same as 62
Replies: 0
Views: 1312

65 Ranchero pedal assembly same as 62

I have an extra pedal assembly and just want to verify that is the same set-up as my 62 Ranchero. I bought the bearing kit to rebuild and just would like to swap it , Thanks Ralph
by Ralfchero
Thu Aug 01, 2019 11:10 am
Forum: 144-250 "Small Block" Six Performance
Topic: Decking block
Replies: 1
Views: 280

Decking block

I have a 65 200 block at the machine shop to have work done,already had to open bores to .060 but I never checked the deck and was wondering how much would be good to remove. I will be running a late model EOBE head with multiple carbs, just want to get compression around 9.5 or higher, not a daily ...
by Ralfchero
Sun Jul 28, 2019 9:31 am
Forum: Transmission & Drivetrain
Topic: 2.77 to 4 speed toploader swap
Replies: 4
Views: 993

Re: 2.77 to 4 speed toploader swap

Thanks for the reply,may have found a spacer @ Modern Driveline, will call tomorrow to see if it the correct one I need. Thought about cutting input shaft , done it on old VW bus conversions.
by Ralfchero
Sat Jul 27, 2019 8:04 pm
Forum: Transmission & Drivetrain
Topic: 2.77 to 4 speed toploader swap
Replies: 4
Views: 993

2.77 to 4 speed toploader swap

Been lurkin here while i'm working on my 62 Ranchero, 170/2.77 3on the tree. I picked up a belhousing from a 65 Econoline with a 3.03 trans and noticed that it has the same bolt pattern as my toploader I have from a parts car, only difference is that the input shaft on the 4 speed is about 1/2"...