Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2018 Contributors:
StarDiero75, curts56, DannyG, B RON CO, wsa111, Captainslow42, falconcritter
Econoline, THE FRENCHTOWN FLYER, 95FordFleetside, turbo6, Max_Effort, WorldChampGramp
cr_bobcat, C.S.Designs, pmuller9, gus91326, rwbrooks50, rocklord, drag-200stang, Big64my79Effie, CNC-Dude, gb500

2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40,
mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry

Unknown->> M.Ketterer, T.Smith, J.Myers, P.McIntire - Please PM me (1966Mustang) and lemme know who you are!

Search found 12 matches

by FordThunder
Mon May 13, 2019 10:50 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Need guidance on Master cylinder and slave cylinder
Replies: 6
Views: 282

Re: Need guidance on Master cylinder and slave cylinder

Hey guys, I appreciate all the replies and I am happy to announce the truck finally drove today. Turns out my issue was the distance traveled by the master cylinder rod wasn’t enough. Remedy, I pulled the clutch pedal assembly. Replaced the bushings and rotated the lever (had to pull it off, rotate ...
by FordThunder
Mon May 06, 2019 6:26 pm
Forum: The Truck Stop
Topic: Progress
Replies: 2
Views: 414

Re: Progress

Well, funny I just read that inquiry. Truck has been down for a month, long enough for a bird to build a nest and lay eggs. I just posted about the clutch hydraulic system. I got a good 8k hard miles on it. Then had to get it towed home. It’s a rough patch right now.
by FordThunder
Mon May 06, 2019 5:53 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Need guidance on Master cylinder and slave cylinder
Replies: 6
Views: 282

Need guidance on Master cylinder and slave cylinder

Hey guys, 96’ f-150 2wd, M5OD transmission. I am not getting full return on my clutch pedal and can not shift into gear. I have pulled the transmission. I have installed a new internal slave cylinder, clutch/flywheel, rear main seal, release bearing and new master cylinder (two new masters now) and ...
by FordThunder
Tue Feb 12, 2019 10:16 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Motor mounts
Replies: 3
Views: 739

Re: Motor mounts

Nice, that’s what I’m looking for! I have to replace with stock mounts out of necessity at the moment. $30 vs $260. Tires and the exhaust first. Ole Thunder and I thank you!
by FordThunder
Fri Jan 11, 2019 4:36 am
Forum: The Truck Stop
Topic: Progress
Replies: 2
Views: 414

Progress

1996 F-150 field find. Last post on here I was swapping to accel fuel injectors. They worked wonderfully. Then two weeks later fuel pump failed. Replaced that. Truck runs like new. I also finally replaced the leaking power steering pump and tensioner pulley. So I am proud to say zero squeaks and 1 l...
by FordThunder
Fri Jan 11, 2019 4:16 am
Forum: 240-300 "Big Block" Six Performance
Topic: Motor mounts
Replies: 3
Views: 739

Motor mounts

Hey guys, I am in the need of new motor mounts for my 1996 F-150.I was curious if you guys have come across any poly-eurathane or higher density over factory type mounts? Everything I have found is for V8 set ups.
by FordThunder
Tue Oct 02, 2018 12:10 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Replacement fuel injectors
Replies: 11
Views: 993

Re: Replacement fuel injectors

Hey guys, I replaced the injectors and man what a difference! The only pain I had was the factory quick connect fuel line breaking(when replacing filter) and the EGR being 22 years old. Aside from that I’m having a blast with it. I haven’t removed smog pump yet. I also need to weld the exhaust leak....
by FordThunder
Sat Sep 22, 2018 10:53 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Replacement fuel injectors
Replies: 11
Views: 993

Re: Replacement fuel injectors

Cool, thanks for the time. I see what you mean. I’m still deleting it though. But really it made me think one change at a time. Injectors first. I’ll try post it up as I progress. Cheers
by FordThunder
Fri Sep 21, 2018 11:52 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Replacement fuel injectors
Replies: 11
Views: 993

Re: Replacement fuel injectors

Don't delete the EGR. It allows you to run a lean mixture for fuel mileage while keeping the cylinder temps low. I might not delete it. But I’m still not convinced as why not too. But this how I see it: First, if I’m running a lean air/fuel ratio, my cylinder and exhaust temperatures would be highe...
by FordThunder
Thu Sep 20, 2018 10:49 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Replacement fuel injectors
Replies: 11
Views: 993

Re: Replacement fuel injectors

Thanks guys. It’s really clean for 380k. Even cleaner now, I replaced the headlights since the photo. That’s why I had to save it from wasting away. But I am trying to start my own business soon and I need a truck. So, I tell myself. I will try post the progress with the fuel injectors (with A/F rat...
by FordThunder
Thu Sep 20, 2018 12:54 am
Forum: 240-300 "Big Block" Six Performance
Topic: Replacement fuel injectors
Replies: 11
Views: 993

Re: Replacement fuel injectors

Hey, I looked at the Accel injectors (150615) earlier and the cheapest I could find was $262.45. I saw your reply and was like ehh, I can look one more time. eBay, $149.99 sold directly from Holley. Scratch and dent (only cosmetic flaw) free shipping. The deed is done. I’ll let you guys know how the...
by FordThunder
Wed Sep 19, 2018 5:31 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Replacement fuel injectors
Replies: 11
Views: 993

Replacement fuel injectors

Hey guys, My 96’ F-150 flooded cylinder #6 with fuel. In fact, it filled the cylinder enough that the starter could not handle the additional load, cracked the starter nose cone. ( replaced starter) After pulling the plugs and cranking the engine fuel flew 20ft out of the cylinder. So, yeah, I’m in ...