[align=center]Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum![/align]
[align=center]2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40,
mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry
rzcrisis, DoctorC, jamyers, Motorboy, fastpat, Silverback280, chad


<<< New Site Update >>>
[/align]

Search found 144 matches

by djfalcon10
Sat Jun 08, 2019 8:24 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

Ok. I down jeted the carb and now the reading is 11.9 to 12.5. so it's good. But now I have other problem. The blower belt keep coming off when I put a load on it. So I put on a bolt on tensioner. I think I need a spring load tensioner. But I don't know what kind to get. Hope you guys can help me wi...
by djfalcon10
Sat Jun 01, 2019 11:52 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

Okay I took my car out today. Cruz in the car at 50 miles an hour the vacuum reads 13. So I'm assuming my power valve on 3.5 is okay? So now I am going to go down to jet sizes on the primary and see what happens
by djfalcon10
Wed May 29, 2019 12:41 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

I actually bought myself a 650 dp demon blow through carburetor. Has power valve in primary.but none in the secondarys
by djfalcon10
Tue May 28, 2019 12:00 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

Okay that was just a guesstimate on my on my cruising with 12 inches of vacuum.I will let you know by this weekend if it doesn't rain for sure what my vacuuming is at cruising speed
by djfalcon10
Tue May 28, 2019 11:37 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

Ok. So if my crusing vacuum say is at 12 . Then I don't have the right power valve. Correct?
by djfalcon10
Mon May 27, 2019 1:30 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

At 50 mph. It at 2800 rpms. I will have to look at the vacuum again to let you know. at idle it has 7" of vacuum. I have a ,3.5 power valve in it now.. The boost reference is attached to the carb hat
by djfalcon10
Sun May 26, 2019 5:08 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

Ok. Sorry it took so long. But the weather be crappy here.here what I got. The Jets are 76 primary and the secondary are 83. Took it out for a drive today. At idle in gear. It is at 12.5 to 13.1 a/f. Crusing the car at 50 mph. The a/f is at 10.1 to 10.9. now when I got on it wot it was at 11.8 to 12...
by djfalcon10
Sun May 05, 2019 3:04 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

Hello again. Okay I drill out the power valve restrictors.when I am driving the car at normal speed let's say 45 mph. I am not in the boost but my fuel pressure gauge goes from 6 to 7 psi.the AF show 12.5 to 13. When I step on the gas a little. It drops to 10 to 11. I have step on the pedal have way...
by djfalcon10
Mon Apr 22, 2019 9:51 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

I will do that. I will start with a 5/64 drill. Then go out and wot. And see what the a/f is.
by djfalcon10
Mon Apr 22, 2019 7:24 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

Yes . It does see lots of street time. But I do take it to the drag strip twice a year. When I am cruising the car. The a/r is reading 12.5 to 13.6.. I will be taking the car to the dragstrip next Sunday April 28th so I can do a lot of tests in tuning out there so I guess I will jet it up more and s...
by djfalcon10
Sat Apr 20, 2019 6:04 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Re: Question on my air fuel ratio on my supercharger wagon

I replace the floats and needle an seat for blow Thur. Hot rod mazgine had..how to do a blow Thur for under $50. There was a other web site that I think was called hanger 18. Showed how to make a blow Thur. I did not drill out the idle circuit behind the power valve.. I am running a 2.5 power valve ...
by djfalcon10
Thu Apr 18, 2019 9:55 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Question on my air fuel ratio on my supercharger wagon
Replies: 22
Views: 1092

Question on my air fuel ratio on my supercharger wagon

Ok guys I need some help. Got a 65 falcon wagon with a 300 in it with a Paxton supercharger. Just got the motor togetter. Put the blow Thur hat and hook the the piping. Have a areomotive boost reference fuel pressure gauge. I have an autometer air fuel ratio gauge.the O2 sensor hook up by the collec...
by djfalcon10
Wed Dec 19, 2018 8:40 pm
Forum: Steering and Suspension
Topic: Tappered reverse inserts
Replies: 1
Views: 354

Tappered reverse inserts

Does anyone know who make a reverse tapered insert for where the steering link goes into the pitman arm. I have a 65 falcon that had a 200-6 in it. Replace it with a 300-6. had turn the streering link upside down. Cause the oil pan would hit it. So I drill the pitman arm with half inch drill bit. Pu...
by djfalcon10
Mon Dec 17, 2018 10:52 pm
Forum: Eye Candy
Topic: 65 falcon wagon 300-6 supercharger
Replies: 5
Views: 1967

Re: 65 falcon wagon 300-6 supercharger

Rebuild the motor and put a brand new cam. Sounds real good. Have not driven it cause it winter. Waiting on
by djfalcon10
Mon Dec 10, 2018 8:40 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: What cam with a supercharger
Replies: 9
Views: 2339

Re: What cam with a supercharger

Yes . And it sounds sweet. Got it running about 2 months ago. I will try to post a video on here in a little bit
by djfalcon10
Sun Apr 01, 2018 6:40 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: What cam with a supercharger
Replies: 9
Views: 2339

Re: What cam with a supercharger

Its a street car. But i take it to the drag strip twice a year. Got a new cam for it. From clay smith cams. The spec on it follows
.575/.575 lift
306/306 dur
264@.050
107/113 cl
Now waiting on the balancing on my motor to be done
by djfalcon10
Sun Feb 25, 2018 11:11 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Advancing the cam
Replies: 9
Views: 1491

Re: Advancing the cam

Have not got the motor togetter. Going to take the rods, pistons,crank,flywheel and harmonic balancer . to get them balance. It will be awhile before i get it running. But i will let you know.when i get it running
by djfalcon10
Sat Feb 10, 2018 1:26 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Advancing the cam
Replies: 9
Views: 1491

Re: Advancing the cam

Try to download the cam spec. Wont let me do it. Here what my cam card saids
Intake =open/close 25@.050/59@.050
Exhaust=open/close 65@.050/19@.050
Cl at 107 and 113@.050
by djfalcon10
Sat Feb 10, 2018 12:04 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Advancing the cam
Replies: 9
Views: 1491

Re: Advancing the cam

Ok. Now i understand what you are trying to tell me. Just need to make sure it at 107. Thank for your help
by djfalcon10
Sat Feb 10, 2018 11:34 am
Forum: 240-300 "Big Block" Six Performance
Topic: Advancing the cam
Replies: 9
Views: 1491

Advancing the cam

Got my new cam and here is the specs .567 lift 306 dur 110 lobe center 107 centerline. Now the company told me to adavance it 3 degrees now i got a cloyes gear set. That has 4 degree adv and retard. But no 3 degree. Now will it hurt my cam and if i adavance it at 4 degrees to get 111. or is there a ...
by djfalcon10
Wed Jan 31, 2018 10:03 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Got my new cam for 300 paxton supercharger
Replies: 3
Views: 1102

Re: Got my new cam for 300 paxton supercharger

Yes. Then have to advance it 4 degrees to get 110
by djfalcon10
Mon Jan 29, 2018 5:56 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Got my new cam for 300 paxton supercharger
Replies: 3
Views: 1102

Got my new cam for 300 paxton supercharger

Ok got my new cam for my 300. First let me tell you about my wagon to refresh your guys memory. 65 ford falcon wagon. The car weights 3200 lbs. Has a paxton novi gss @ 7psi. 650 blow thur carb. Offy intake. 9.5:1 ross forged pistons. C6 trans with 3500 stall. And a 8.8 rearend with a 4.10. Now the n...
by djfalcon10
Sat Jan 20, 2018 12:33 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: What cam with a supercharger
Replies: 9
Views: 2339

Re: What cam with a supercharger

Yes it is. Got a new set of custom forged blower pistons from ross. It will be 9.5:1. Others have said to go to clay smith cams. just want to see what supercharger/turbo guys cams they like to go with.
by djfalcon10
Fri Jan 19, 2018 10:19 am
Forum: Turbo, Supercharger, and Nitrous
Topic: What cam with a supercharger
Replies: 9
Views: 2339

Re: What cam with a supercharger

9.5:1 comp.
Headers yes
Port and polish head 2.02/1.60
by djfalcon10
Thu Jan 18, 2018 9:44 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: What cam with a supercharger
Replies: 9
Views: 2339

What cam with a supercharger

I am looking for a recommendation on a camshaft. I a have a 300 with a paxton novi gss with 7 psi. What cam company do you guys like?
by djfalcon10
Thu Dec 07, 2017 5:46 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Hp/ tq on a 300 6
Replies: 10
Views: 2283

Re: Hp/ tq on a 300 6

I would say a streetable engine. I don't think it possible to make 450 hp on the street. But could be wrong. Now what about a race motor?
by djfalcon10
Thu Dec 07, 2017 3:01 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Hp/ tq on a 300 6
Replies: 10
Views: 2283

Hp/ tq on a 300 6

What is the biggest hp on a 300 6 if it is modified? There is a other fourm that a guy said that his builder told him. He will get 425hp and 500ft at the rear wheel?.ask what kind of set up he had. Said he did not know the inside of his motor. But it had webers that came out for Ferrari. So my 300 g...
by djfalcon10
Tue Sep 05, 2017 7:53 pm
Forum: 240-300 "Big Block" Six Performance
Topic: 300 Harmonic on a 240.
Replies: 2
Views: 735

300 Harmonic on a 240.

Can you put a 300 balancer on a 240 crank
by djfalcon10
Fri Aug 18, 2017 9:03 am
Forum: Turbo, Supercharger, and Nitrous
Topic: looking for blower pistons for 300
Replies: 9
Views: 2345

Re: looking for blower pistons for 300

No my Boost line was hooked up to the carb hat and my fuel pump is regulated at 7 PSI you cant adjust it so there was my problem
by djfalcon10
Thu Aug 17, 2017 5:10 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: looking for blower pistons for 300
Replies: 9
Views: 2345

Re: looking for blower pistons for 300

Ok now my question is. I do have a fuel regulater with boost referance. The line goes from the boost line to the carb.was this the right way? Or should it be to manifold vacuum?
20170806_130043.jpg
by djfalcon10
Thu Aug 17, 2017 4:03 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: looking for blower pistons for 300
Replies: 9
Views: 2345

Re: looking for blower pistons for 300

I got that camshaft because of my 3500 stall. I think I might have found out my destination problem. I have a Holley HP 125 that flows 110 and 7 PSI I don't think that was enough for my supercharger. I'm think about upgrading to the Holley HP 150 it flows at 140. When the car was at top end my fuel ...
by djfalcon10
Tue Aug 15, 2017 10:27 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: looking for blower pistons for 300
Replies: 9
Views: 2345

Re: looking for blower pistons for 300

Thanks for the tip. Yes it is a street and strip car. But i took to the track last sunday and blew up the motor. Put a hole in#2 piston and it was missing a top ring land on#2,#5,#6. The piston were Keith Black Hypertech pistons and they suck luckily I have a spare motor in the wings so I thought I ...
by djfalcon10
Tue Aug 15, 2017 9:26 am
Forum: Turbo, Supercharger, and Nitrous
Topic: looking for blower pistons for 300
Replies: 9
Views: 2345

looking for blower pistons for 300

Hey guys. I have a 300 with 240 rods. Puting on a paxton supercharger. Need to know what part number for a blower pistons. Or where to go to get custom piston. Thank for your help
by djfalcon10
Mon Jul 31, 2017 7:36 am
Forum: Turbo, Supercharger, and Nitrous
Topic: Supercharger on 300 6 misfiring at top end.
Replies: 4
Views: 1363

Re: Supercharger on 300 6 misfiring at top end.

Thanks for your help. I am running a electric fuel pump. So i will get the one with the vacuum port.
by djfalcon10
Sun Jul 30, 2017 5:37 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: Supercharger on 300 6 misfiring at top end.
Replies: 4
Views: 1363

Supercharger on 300 6 misfiring at top end.

I have a paxton supercharger on my 300. I have ngk plugs. Gapped at.30. I took it out and got on it. Soon as it get above 4000 rpm. Its starts poping. Now i have notice on my fuel pressure it set at 6 psi. When i floor it it went down to 4 psi. My friend tells me i need a boost regulater. And that i...
by djfalcon10
Wed Jul 12, 2017 10:12 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: need idea on new pulley set up on my supercharger
Replies: 5
Views: 1589

Re: need idea on new pulley set up on my supercharger

No..it will fit on a 240 crank. But not on a 250
by djfalcon10
Tue Jul 11, 2017 5:13 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: need idea on new pulley set up on my supercharger
Replies: 5
Views: 1589

Re: need idea on new pulley set up on my supercharger

Thanks for your idea. It gave me one too. You know they have a serpentine balancer for the 300. So why dont i put a v grove in the back to run my waterpump and alternater. And use the serpentine for my sc. I think it can work
by djfalcon10
Mon Jul 10, 2017 3:19 pm
Forum: Eye Candy
Topic: 65 falcon wagon 300-6 supercharger
Replies: 5
Views: 1967

65 falcon wagon 300-6 supercharger

Ford falcon wagon 300-6
by djfalcon10
Sun Jul 09, 2017 12:31 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: need idea on new pulley set up on my supercharger
Replies: 5
Views: 1589

need idea on new pulley set up on my supercharger

I have a 300 in my falcon wagon. It has a paxton novi gss. I was planning on running 2 belts on the sc. The harmonic balancer has three pulleys on it the first one and the second one are different sizes. I'm using the middle one to run the supercharger. Middle belt us 3/8 wide. And the front on is 7...
by djfalcon10
Wed Jun 21, 2017 9:34 pm
Forum: Steering and Suspension
Topic: upgrade the six-cylinder Falcon suspension
Replies: 1
Views: 1108

upgrade the six-cylinder Falcon suspension

i have a 65 ford falcon with a 6 cylinder suspension. The motor is a 300 6. I still have the 4 lug wheels And i would like to keep the 4 lug wheels. The oil pan on the motor has a center hump.. So what can i do to improve it. Without going to a v8 suspension.thanks.
by djfalcon10
Sun May 28, 2017 11:33 pm
Forum: 240-300 "Big Block" Six Performance
Topic: choosing right gear and stall speed
Replies: 2
Views: 805

Re: choosing right gear and stall speed

65 ford falcon wagon
by djfalcon10
Sun May 28, 2017 6:40 pm
Forum: 240-300 "Big Block" Six Performance
Topic: choosing right gear and stall speed
Replies: 2
Views: 805

choosing right gear and stall speed

I bought a comp cams solid lift. Here are specs .576 int/.545 exh Dur.290°/294° CL 108 Duration @.050 256/256 The car is manily driven on the street. But will take it down the track 2 or 3 times a year. I am thinking it needs a 3500 stall. The gearing i dont know. I am thinking between a 3.55 to a 4...
by djfalcon10
Mon May 15, 2017 7:37 am
Forum: Turbo, Supercharger, and Nitrous
Topic: do i need larger bov?
Replies: 3
Views: 1194

Re: do i need larger bov?

sorry. No nothing has change. Still has the 5"pulley.and it still put out 4 psi. I should have word it different. I was at a car show on sat.i told a guy that when i let off the gas. The air comes out the supercharger filter and the bov.and it has a intercooler on it. He tells me that it should...
by djfalcon10
Sat May 13, 2017 8:17 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: do i need larger bov?
Replies: 3
Views: 1194

do i need larger bov?

Ok. I have a greddy 35 mm bov. My supercharger run 7 psi. When i get on it.and let off. it come out the filter on the supercharger more than the bov. So do i need a larger bov ?
by djfalcon10
Mon May 08, 2017 11:06 pm
Forum: 240-300 "Big Block" Six Performance
Topic: Blower Intake Manafold for a 300?
Replies: 12
Views: 2542

Re: Blower Intake Manafold for a 300?

There a company called aussiespeed. That is making a blower manifold for the 300.
by djfalcon10
Mon May 08, 2017 12:50 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: why do i have 4 psi instead of 7 psi
Replies: 3
Views: 1358

Re: why do i have 4 psi instead of 7 psi

Ok. I am checking it at 6000 rpm.that where i shift
by djfalcon10
Sun May 07, 2017 10:15 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: why do i have 4 psi instead of 7 psi
Replies: 3
Views: 1358

why do i have 4 psi instead of 7 psi

Ok i have a paxton supercharger gss on my 300. When i bought it it has the 6 rib serpentine pulley on it. And it was rebuilt to put out 7 psi. Now the old pulley was 4 3/4". I called up paradise wheels. Told them what i had. Needed a twin v belt pulley. When i got it. It measures 5". I put...
by djfalcon10
Sun May 07, 2017 11:57 am
Forum: Turbo, Supercharger, and Nitrous
Topic: need help on greddy bov adjustment
Replies: 9
Views: 2009

Re: need help on greddy bov adjustment

Ok. I check the old pulley and its 4 3/4.the new one is 5". So with the bigger pulley i got less boost? Hopefully you guys can help on this. Can a 1/4 difference make me lose 3 pounds of boost?
by djfalcon10
Sat May 06, 2017 4:20 pm
Forum: Turbo, Supercharger, and Nitrous
Topic: need help on greddy bov adjustment
Replies: 9
Views: 2009

Re: need help on greddy bov adjustment

Ok i tighten it up a little more. It still just giving me 4 psi of boost. When i bought the supercharger. I got a rebuild sheet with it. and it suppose to have 7psi . but i did change the pulleys over from serpentine to dual pulley.i got it from paradise wheels. Woundering if the pulley is a little ...