small six

  1. Crustang to Mustang

    All Small Six 3x Carburetors on 250ci

    I'm trying to sort out my carb situation and I need to know, what is the overall cost of doing the Offenhauser 3x1 set up (give or take)?
  2. marquis83

    Road Trip MPG 1983 Marquis

    Fascinated to achieve 18mpg on a road trip with this car. Normally I get 13mpg with mixed city and highway driving. I took a 180 mile trip to meet my dad for the fourth of july weekend. I even got the car up to 85 a few times. Though for the fear of damaging my already leaking valve seals I...
  3. Crustang to Mustang

    All Small Six Are Twin Turbos Too Much?

    I really want to get some dual outlet headers for my 250ci but I wouldn't be able to run a single turbo with 2 pipes (tell me if I'm wrong). So I got to thinking. If I got the dual outlet manifold from Aussiespeed and installed dual 2bbl carbs, could I twin turbo a 250ci or would I blow the engine?
  4. Selecting Your Cam's Lobe Center

    Selecting Your Cam's Lobe Center

    Other related articles: Selecting the Proper Camshaft, Static vrs Dynamic Compression. While most of our customers know what lift and duration are, most have no idea what the term Lobe Center means, or how it effects the engines performance. Therefore the biggest obstacle to overcome when...
  5. Small Six Cylinder Head Swaps

    Small Six Cylinder Head Swaps

    Original Source: https://ciarchive.fordsix.com/HeadSwap.html First, let start by saying that all 144, 170, 200, & 250ci heads are interchangeable.... and while the valve size, chamber size (cc's), and intake/port volumes (cc's) changed over the years, all of the small six cylinder heads will...
    • 1966Mustang
    • Article
    • 7 min read
    • 1101 swap 200cid aluminum head cylinder head falcon performance handbook small six
    • Category: Cylinder Heads
  6. Flow Testing the "Log" Cylinder Heads

    Flow Testing the "Log" Cylinder Heads

    This tech article is a "work in progress". Information will be added as it becomes available. Over the past few years we've flow tested several Australian 250-2V cylinder heads, as well as our own Aluminum cylinder heads. However we've always wondered how the cast iron "log heads" stacked up...
Back
Top