2v chamber size

[rammed wx]

could anybody tell me what the chamber size is on a 2v head?

also just wondering what people have done
with their 2v's with comp and deck heights etc.

with using 200 rods and the acl race kit
with .020" what compressing would i be looking at is what im trying to figure out.
probably want to run 10.5:1
too much?
considering it is goingin a fairly light car (xm)

also be interested to know what other people have used on their 2v rebuilds

as you can probably tell i am trying to gather a bit of infomation on what has shown good results

thanks guys

 

[xctasy]

Check addos posts. 59 to 62cc's was common size. Any work done on the head will lower when skimmed.