anyone wana sell a turbine housing?

[Unfalconbelievable]

im after a larger turbine housing for my T04E. its a cheapo ebay item but the centre is genuine garrett so any T3 housing with a similar 6 bolt centre should fit currently its a 57 trim with a .63 AR, im after an external gated .75 AR or there abouts if anyone could help me out, im in tassie australia but im happy 2 pay postage

 

[XFlow_Fairlane]

why so big? I am running a .63 AR and am happy with it. I am stepping up to the same turbo this spring/winter (.57 cold and a .63 hot) and plan on running an external gated system though

 

[Anonymous]

Which "stage" turbine wheel are you using?


http://64.225.76.178/catalog/t3.html

 

[Unfalconbelievable]

im not sure, like i said cheapo ebay item. all i know is its a 57 trim turbo. im going to the larger a/r because the current housing resticts the engine too much. im running a 4.0l ohc injected and the flow is a bit more then a 200 or 250 ohv. at the moment i have the waste gate wired open and it still gets positive pressure, tho more like a centrifugal supercharger, its proportional to revs. it has a stutter as i hit the gas which i have pin pointed to the exhaust housing as its alot better with the extra flow of the waste gate being open. i've got the turbo apart currently and i need a shaft and turbine wheel also hehe hot shut downs when the headgasket blew took its toll

 

[Anonymous]

've got the turbo apart currently

Measure the exhaust wheel.....both the small diameter and the large diameter....and post back

 

[Unfalconbelievable]

one step ahead of u lincs, 2.24 inches and 2.6 inches respectively, not a listed size prob cause of the korean origines hehehe but i can get a wheel/shaft combo 2 while im going. gives you and idea tho, bout stage III. what are your ideas?

 

[Anonymous]

what are your ideas?

My ideas are: I never mess around with odd-ball turbos. Maybe a good turbo shop can get you what you need.

 

[Unfalconbelievable]

Yea i've found a housing but i think ill go for a larger housing and a new wheel trim also