Diesel Inliner.

Cool23

Famous Member
redxm":2dyudi5t said:
Nice Photos.

Photographer was due today to do the feature. It has been wet here earlier in the week so a clean up was late happening. Once I got into the cleaning I found some one had removed (stolen :devilish: ) nut covers so the photo shoot has been delayed :cry: .So today (Sunday) I have to meet with the fellow that supplied me with these nut covers and replace all that have been removed. These will be glued on again but this time I may look for a stronger glue ;) .

Edited Note: I used Loctite Superflex last time and will use it again. Looks like some pressure was put on the guard to remove the covers.
 

Cool23

Famous Member
Another issue now to resolve. The LPG system appears to be stuck in limp home mode. Company that made it has gone and no support or diagnostic equipment can be found. Possibly time for a rebuild. :unsure:
 

Cool23

Famous Member
Started pulling the LPG off as I can not find any support for the ECU system. LPG tank will get fitted to my other truck later.
 

Cool23

Famous Member
With the LPG system off I am now waiting to hear from Australian Custom Trucks Magazine as they wish to do a feature.
 

Cool23

Famous Member
Well the feature has come out in the magazine today. Australian Custom Trucks Issue 6. Sadly the image I am trying to post is too big.

AustralianCustomTrucks1341515103.jpg
 

Cool23

Famous Member
Feature also contains photos of my XP Falcon and the T Roadster with the inline six. In another part of the magazine my International Truck is photographed at the local truck show so in all I have 4 vehicles in the one magazine.
 

Cool23

Famous Member
Broken something in the overdrive and it will not get out of low range. Looks like it will have to come out for closer inspection.
Just when we have the Street Rod Nationals happening just up the road my truck will be stopping in the Garage :cry: .

https://www.asrfnationals2017.com/ I will still attend as I have a trade site and after all 1400 entrants will make for a great event.

I was asked to take the T Roadster with the inline six as part of the nostalgia display but without the Truck I am not going to get it there.
 

Cool23

Famous Member
Well I have not broken something in the overdrive but have an electrical fault. Yet to determine now what has failed. The sad thing is getting parts for a US Gear Overdrive is not easy given they are no longer made.
 

woodbutcher

2K+
VIP
:( Oh>Now that`s a definite oh fudge moment.Wishing you the best for finding what you need,and getting back on the road again.
Good luck.Have fun.Be safe.
Leo
 

Cool23

Famous Member
woodbutcher":2yll23ny said:
:( Oh>Now that`s a definite oh fudge moment.Wishing you the best for finding what you need,and getting back on the road again.
Good luck.Have fun.Be safe.
Leo

We have found some one with the parts and just waiting on confirmation from them.
 

bubba22349

Top Poster
Staff member
VIP
Supporter 2021
Supporter 2019
REDLINE 10K
:beer: Hope all goes well and you get that beauty back on the road again. Good luck :nod:
 
Top