GTech-Pro Performance Meter

[Billr57]

Has any one had any experience with one of these GTech-Pro RR?
http://www.gtechpro.com/rr.html#
Not having the time to go to the strip (work almost ever weekend) and having lots of back roads around here I went ahead and bought one of these. I have made a few 1/4 mile runs with it and it shows me a constance mid 14's with 0 - 90 time in the mid to upper 13's does this sound about right?

also if anyone knows of a GOOD Dyno shop on the south side of Chacago let me know. I can't seem to find one.

Here is my setup...............

1969 Mustang Fastback 250ci, Bored .030 Over, Decked +.010, Balanced, Holley 500cfm, dual 11" Electric Fans, Ford Racing T-5, Duraspark II, MSD-6AL, 8.5mm MSD Wires, MSD Blaster SS Coil, FSPP Ceramic Coated Dual Out headers, 2 1/4" Exhaust, Flowmaster 40 Series Mufflers, SafeCode Inc. Sequential LED taillights, Monte Carlo Bar, Export Brace, Crager SS 15X6,P215/70R15, Crager SS 15X8,P225/60R15, 5 Leaf Performace Springs, 3.80 8" Ford 28 Spline Posi Trac-Lok, Traction Bars, Custom made Dash Panel with Auto -Meter Gauges, Custom Autosound USA-6 Radio, CSRP Front Disk Brakes, Holley Red Electric Fuel Pump, Custom Made 9qt Oil Pan w/ Windage Tray, ARP Rod, Main & Head Studs, Classic Inlines Proto Type Aluminum Head, Car weight 3180 (local gravel pit scale)

Let me know
Bill "The Guy Who Built A Six" Richcreek

btw, is anyone going to the "1st Annual Trackside Mustang & For Car Show" in Joliet, IL on September 30th? I have put in for Vacation for that day, just waiting to see if it get APPROVED.

 

[82F100]

Bill, I sent an e-mail to my cousin, who races at Route66 if he knows of a shop.If I hear anything I'll pm ya' Mid 14's HUH???? I know alot of gt's etc that would get embarrased by your lil fastback LOL.

 

[rbohm]

8) as the commercial says;

"the magazines tested it, now they test with it"

 

[Cool23]

I have a mate who has one and says they are pretty good.

 

[Rustang Racer]

I don't have that one but I do have the original g-tech. I went to the drag strip with it and it was accurate to within a tenth and about 3mph. I thougt it was worth the money. The original one was only about $150 though.

 

[Anlushac11]

8)

From what I have read about them on different forums they are usually pretty close on 1/4 mile times but the estimated trap times are always a bit off.