turbos and misc parts for sale

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
Hi Guys.
due to me being a hoarder , my inner accountant is telling me to sell....Here Goes.

Jaycar hei And programable ignition combo. built and can separate. look up the specs. offers , these are well built.

250head v clean had some blending work done not major offers... looks reco..

NOW the Goodies.....
i Want to recooperate
my losses and thats it...

kkk k27 turbo, 1.0exhaust , 2.5inch exh wheel split pulse . machine finishshed snout, porche front wheel . recently rebuilt and hiflowed by ats, got all papers. good for 20-22 psi not used. around 900$ i'll repost price wen i find receipts.500or so hp

tba T04 .60 front 8 blade large wheel, 1.32exhaust 3inch wheel,split pulse large t04, v clamp rearmodification. very good for 250s . around 500hp or more 20or so psi rebuilt with no use, looks brand new!

tba hks copy wastegate55 mm , this is one ofthe ones of ebay, but had all the machine work tto get it to work and open properly, including valve stem machine , internal portinga bit rough, kkk spring. and resealed. $435 not used with brackets.

got an rb25 twincam head and inlet to sell

Please post all interest on forum.

thanks all
john
 
megjolt, gt42 w internal gate, striaght gas.... umm yeah and some stuff i just got becausei thought i'd get around to using it kkk and rb25head on an rb30 block for example.


but realism has finaly set in... and its all gotta go .

ive also got a big bar plate cooler core, with a whole lot of metal to weld end tanks to... 70$ use it to make 2 big coolers for wide front cars eg xa- xc etc

ive also got a 32mm garret wastegate $150

and a kkk 29mm wastegate with new diaphram $150 nice bit of gear...

soon to be selling xd 250 motor complete with trans les started with everithyng else. 117000 kms from one owner offers accepted...
 
addo can we get a for sale section in the au subsection. i think we need one because we are surounded by 000s of kms of water......

besides most of our ford are unique to aus, thus if i or any other au members ned parts we have to sive through all the US stuff for sale ....

just a thought though
\ :roll:
 
would that happen to be a 250 2V head?
if so, how much would you want for it? i'll work out shipping later if the price is right...
 
how can i tell its a 2v???

the turbo should be avail, just waiting on the new one to arrive.
 
the intake manifold will be bolt on if its a 2v head. A 1v head has the manifold cast into the block. (pre cross flow heads...)

If it is a 2v, does it come with a carb?
 
it's a 2v....
without carb or manifold, just bare head.

going to have a xd falcon 250 with only 117000 kms for sale soon....anyone interested ...???
 
i might be interested in that head....
we'd need to work out shipping or something (addo, got any ideas?), and of course it's dependant upon price

let me know
 
I'd be interested. Got any pics/whats it come with/history? Thanks.
 
John, just confirming for the guys asking about it - that's a pre-crossflow head with intake and exhaust ports on the same side, right?

Evan: See if Az will cut a deal on shipping via Mike Fielder. If you want to blow about $15-1600 I could otherwise stuff a small crate with goodies. XF Falcon alloy caliper brakes, some Oz Clevo 2V heads/spreadbore 2V manifolds, all that stuff. There's a 302C nearby getting junked in the next couple of weeks, I think. That said, it would cost me $120-ish to get a head from Melbourne to here.

Just a thought, anyway.
 
not precrossflow...

alloy crossflow head.

the motor was a one owner before i got it... i didn't use it .
owner was an old man , my accountants father...
no hard use. been sitting in my garge for two years. i start it now and then to get it moving needs a tune and oil if anything. also original bw auto that doesn't work too well due to the seals drying up .i'll throw it in for a bit...


still have thhe turbos ...come on boyya know they are good, i'm charging cost and i bought them for a deal..
 
all bits for sale now im going with the gt 42 i bought , all bits are still here
head is pick only
 
You must log in or register to reply here.
Back
Top