what is the diameter of a rocker shaft, i dont have a micrometer
64 200 ranchero 1K+ VIP Jun 24, 2010 #1 what is the diameter of a rocker shaft, i dont have a micrometer
C CZLN6 2K+ VIP Jun 26, 2010 #2 Howdy: Just measured a very dirty shaft. It came out to 25/32" OD or .7813". ID is 33/64" or .5156". Adios, David
Howdy: Just measured a very dirty shaft. It came out to 25/32" OD or .7813". ID is 33/64" or .5156". Adios, David
64 200 ranchero 1K+ VIP Jun 26, 2010 #3 thanks, these rollers might work http://www.jegs.com/i/Harland+Sharp/851/4006B/10002/-1
addo Top Poster VIP REDLINE 10K Jun 26, 2010 #4 If I read right, aren't they for an 0.840" shaft? I suppose they could be bushed down.
64 200 ranchero 1K+ VIP Jun 26, 2010 #5 i was thinking that i can get a tube with those dimensions and bore out the pedistals
bubba22349 Top Poster VIP Supporter 2021 Supporter 2019 Departed Member Jun 27, 2010 #6 Have you tried to call Harland Sharp direct? They make rockers for some sixes like the ford 300's they probably would make them for a 200 also.
Have you tried to call Harland Sharp direct? They make rockers for some sixes like the ford 300's they probably would make them for a 200 also.