valve seals

want to replace them on my 200, if someone could lead me to the correct ones that'd be awesome, its a 71'. either through classic inlines or what type/size i need, seen them on CI but was puzzled by the variety. thanks, Lee

I've used only the standard Felpro ones, and need to replace them again - after only about 5 years.

...replace my '71 200ci valve seals..."
Just curious - what tells U it's that('s so)?

Viton seals are much better than the old umbrella type.
For a stock application (cast iron head), you'll need the 530's.
http://classicinlines.com/products.asp?cat=134

U mean what tells me it the valve seals? Every time i let off the gas on the highway it puffs out smoke from the tailpipe. and i know its a 71 b/c when i got it there was still the sticker on the valve cover with all the info; not sure which one u meant.

Thanks mike, i'll have to look into those, do u get all or how many do u get for 10 bucks? it doesnt really say, thanks

sticker on the valve cover
not always reliable. could B a swapped VC.
If U believe that's the whole issue w/the vehicle - when U order the seals give them the casting numbers on the block by the exh, manifold down pipe. U may find (as I did) something different than U expected.
Good Luck, keep in touch...

merccomet":2pwyjh7o said:

....how many do u get for 10 bucks? it doesnt really say, thanks

Click to expand...

includes 12 seals

Mike, will the 530 seals work on Aussie 250 2V heads without modification?

rocklord":3pr7ib6a said:

Mike, will the 530 seals work on Aussie 250 2V heads without modification?

Click to expand...

yes