swap head cylinders

roghax85

roghax85

Well-known member
Hello...

I am here to ask againg:

I like to know if is possible to put a head cylinder from a 1964 170ci to 1966 200ci?

I like to know if is possible to put a head cylinder from 1967 200ci to 1966 200ci?

Thanks for all
 
All the heads throughout the years will bolt on to any block. The differences are in log volume, valve sizes and combustion chamber size. Bolting an early head on a later short block could result in very high compression and vice versa.

The two heads you mention ('66 vs '67) are likely identical. I believe they will both lack hardened seats which may or not be a problem, but they are the same and will interchange with no issues.

Here is a link to show some different specs that I reference all the time.

http://classicinlines.com/SmallSixSpecs.asp#SSgeneral
 
First Fox":1htgbwlc said:
All the heads throughout the years will bolt on to any block. The differences are in log volume, valve sizes and combustion chamber size. Bolting an early head on a later short block could result in very high compression and vice versa.

The two heads you mention ('66 vs '67) are likely identical. I believe they will both lack hardened seats which may or not be a problem, but they are the same and will interchange with no issues.

Here is a link to show some different specs that I reference all the time.

http://classicinlines.com/SmallSixSpecs.asp#SSgeneral
Click to expand...

Thanks Fox :p

the really is my original head cylinder was broke from the intake, we try to make the conversion to 2v, but here no way any machine store that can do it :(

the intake are broke and no-body can welding it. :(
 
You must log in or register to reply here.
Back
Top