Have a rig with a 200/I6 I was told it was from 1969, but I'm not sure.
Have been battling a series of unpleasant carburetors.. Finally found a actual new 1 bbl.. Installed.. Aside from having to convert to a manual choke still, it seems to be a good unit..
HOWEVER: it still has a rough idle, a miss at idle and constant speeds.
I put in a Pertronix ignition, new cap, rotor, and coil (was very old)
I would appreciate any leads?
One issue that still confuses me is the SCV (spark control valve) and the appropriate distributor.
Pics below show the distributor.. The carb on there HAS a SCV.. Should it?
[img=http://s5.postimg.org/rlydz2a4z/dist33.jpg]
Have been battling a series of unpleasant carburetors.. Finally found a actual new 1 bbl.. Installed.. Aside from having to convert to a manual choke still, it seems to be a good unit..
HOWEVER: it still has a rough idle, a miss at idle and constant speeds.
I put in a Pertronix ignition, new cap, rotor, and coil (was very old)
I would appreciate any leads?
One issue that still confuses me is the SCV (spark control valve) and the appropriate distributor.
Pics below show the distributor.. The carb on there HAS a SCV.. Should it?
[img=http://s5.postimg.org/rlydz2a4z/dist33.jpg]