200 HEI distributor

Hello,
I have found in eBay an HEI distributor for the Ford six from Skip White. It's cheap coming in at about $90. My questions are; will this distributor fit a 1967 200, and has anyone ever used this distributor? https://m.ebay.com/itm/FORD-INLINE-SIX- ... 0921096436

The advance curve is not correct for your application. The curve is way off. You will be sadly disapointed with it.
Here is a link for a new HEI which will be recurved for your application. Mine also have an adjustable vacuum advance for vacuum & amount of vacuum advance in degrees. I calibrate mine on a Sun Distributor Tester. Bill
viewtopic.php?f=86&t=77292&p=594893#p594893

I'm running one of these units in my 200. It ran well out of the box. Later I had it recurved by Bill and it's running great. The only issues I've had with it is oil inside the unit, but this was because of a faulty PCV setup that I've since resolved.

Bill,
I am running a Weber 32/36, will the re-curved distributor work with that?

Most definitely. Just need all your build info. Bill