Aussie 2V250 cast iron head studs

About to put an Aussie 2V250 on a D8 200 block. Looking for new ARP studs. All I can find specific to the 200 are these 2 variety at ClaySmith.

Does the cast iron 2V250 head require the standard studs or the presumably longer 250 CI Aluminum version?

http://www.claysmithcams.com/bolt-and-stud-kits/

Thanks in advance!

I think I mentioned Matt, 1 of our members, at vintage inlines dot com before so will not again (returns frm vacation on April 11th for ur PM frm his site).

Thanks Chad, yeah, I've been working with VI on other stuff. Though I actually never thought to check for studs there. In this case was looking for insight from other forum members here who have the cast iron 2V heads. I think I got my answer off line.

Though based on things I've read about ARP, I'm likely to re-use the ones I have.

they can stretch...

? viewforum.php?f=3 ?
may B?

http://www.aussiespeedshop.com

Oz fleebay

our "wanted forum"?

I also have the Oz 250 2v head. I used the normal length studs. The nuts fit about flush with the studs. All seems fine to me.

Link -
where'd U get the intake (w/the head I suppose)? Fella on nother thread seeks an intake 4 his Oz 2V 250 head...
:

Llink78":2e0to6vn said:

I also have the Oz 250 2v head. I used the normal length studs. The nuts fit about flush with the studs. All seems fine to me.

Click to expand...

Thanks for that confirmation Link.