Parts to Heater hose to the head inlets

rwbrooks50

Well-known member
Supporter 2021
Supporter 2018
IMG_6729 (Copy).JPGIMG_6728 (Copy).JPGIMG_6727 (Copy).JPGIMG_6726 (Copy).JPGIMG_6725 (Copy).JPG


I do not remember where these attach to the head and cooling system. I did not take pictures before removing the head, :banghead: .

1973 Comet original 250 I6 without ac. Trying to finish replacement this weekend.

Thanks in advance.

Rick
 
The heater hose & vacuum control part goes on the left side and next to exhaust manifold at front corner of head. The temperature sender usually goes on right side near rear of head. Good luck (y) :nod:
 
Back
Top