67 Mustang - Help 1 Barrel to 2 Barrel Acc Linkage

thestang":21ktbaug said:
what do you guys think?
Research 1st, questions later.
C "the Handbook" (u do have a copy!?!) for manifold v port vacuum.
All questions on "Falcon or ThriftPower" engines can B answ by this lill reference.(The Ford Falcon 6 cyl Performance Handbook)
B sure to peruse the 'tech archive' above (at big blue box w/crossed screwdriver/wrench).
Won't have 2 drop in here till havin real problems after researchin w/these 2 resources.
 
thestang":2skk95ah said:
bubba22349":2skk95ah said:
:unsure: I would need to see some pictures too tell you though on the Holley the ported vacuum for distributor is on the side of the carb it’s about 3/16 inch. In the above picture the rear of the carb port about 3/8 inch is for your PCV. Good luck (y) :nod:

My PCV? is that the plug thats on the valve cover? that connects to the intake manifold? what do i put in there then?

Yes that’s the one. So you could leave it hooked up as it is then or plug the port on the intake manifold and connect it to the carb. Good luck (y) :nod:
 
Back
Top