Thermostat Housing Temp Myth

65coupei6

Famous Member
Staff member
VIP
While installing the FiTech. I was trying to figure out where to put the temp sender it needs. I figured I would mount it in the thermostat housing.
Everything I read said, do not put it there because it will not read correctly. blah blah blah. I did find one person on the VMF with a 289 who said he did not have a problem. So, I figured why not.

As you can see from the picture it reads about 5-6 degree's off from the temp sender in the head. So myth busted.

IMG_20190608_155215.jpg
 
Back
Top