63 Falcon Exhaust Hangers

63flcn

Well-known member
I rehung the exhaust today after installing a new muffler. Is there a stock exhaust hanger location somewhere between the muffler and manifold?

Currently its just supported by the 2 at the muffler and the exhaust manifold bolts. Seems there should be one somewhere between those points.

I have googled and looked at photos but cant tell.


Thanks
 
My '63 has a mount bracket that bolts to the block just in front of the starter, close to the oil pan. There is an exhaust clamp around the down pipe and the bracket.

Stock, I think that is all there is between manifold and muffler. Hangers on front of muffler and one on the tail pipe.

Section 1, page 37 of '62 Falcon Service manual.

http://falconfaq.dyndns.org/display1.ph ... Page=1-037
 
I like at every junction, 1/2 way between on real long runs - what's that 4 or 5 ona sedan (no resanater)?
I tig a lill 'peg' on each & use those ribber figure 8s (isolaters) but I want pretty hard'n fast as this is off rd sometimes. The 'pegs' come offa used systems w/a cutting wheel.
 
frozenrabbit":1arkw1pg said:
My '63 has a mount bracket that bolts to the block just in front of the starter, close to the oil pan. There is an exhaust clamp around the down pipe and the bracket.

Stock, I think that is all there is between manifold and muffler. Hangers on front of muffler and one on the tail pipe.

Section 1, page 37 of '62 Falcon Service manual.

http://falconfaq.dyndns.org/display1.ph ... Page=1-037

Amazing, thank you. This is what I am missing
 
Back
Top