Hello
I recently rebuilt my 66 Bronco 170 engine, and the machinist's rebuild recommendations are to set the timing and advanced timing. The shop manual only gives the timing, 4 degrees BTDC, but no figure on the advance timing. In general the machinists guidelines are 7-10 degrees BTDC @ 2000 rpm for advanced. Does anyone know what the actual advanced for my engine should be ?
Thanks
Tony
I recently rebuilt my 66 Bronco 170 engine, and the machinist's rebuild recommendations are to set the timing and advanced timing. The shop manual only gives the timing, 4 degrees BTDC, but no figure on the advance timing. In general the machinists guidelines are 7-10 degrees BTDC @ 2000 rpm for advanced. Does anyone know what the actual advanced for my engine should be ?
Thanks
Tony