Hi Tom, here are the few Fenton Exhaust header and Intake Pictures that I have on my computer, also be sure to check the First link it's to some pictures of forum member "rmt" it's a mint Fenton 223 header set and some other rare Fenton 223 Ford parts. After the link are what I have, first 3 pictures are of a Fenton Ford 223 Exhaust Header bolted up to an Offy 2X1V intake same as in picture 4. New sets of Fenton's are being made for Ford Flathead V8 and the early Chevy sixes, but the original sets for a Ford 215 / 223 / 262 are quite rare nowdays. There was talk of somebody on the HAMB site making new sets for the Ford 223 some years back, dont know if it ever happened or not. The next 4 pictures are of the Fenton 2 X 1V intake bolted to a stock Ford 223 exhaust manifold by this we know that there is great interchangeability between stock as well as the different after market hot rod parts that were made back in the day. Or in other words if you have a Fenton, Offy, or stock Ford 223 intake it will bolt to the Fenton or stock Ford Exhaust Manifold and seal with a stock set of gasket’s. Hope this is of some help in your quest, Good Luck.
This first Link is to some pictures of the Mint set of Fenton 223 exhaust headers as well as other rare Fenton parts for the 223, look for post by "rmt" 6th down from the top!
viewtopic.php?f=18&t=50519
Fenton Ford 223 Exhaust Header bolted to an Offy Intake 1
Fenton Ford 223 Exhaust Header bolted to an Offy Intake 2
Fenton Ford 223 Exhaust Header bolted to an Offy Intake3
Offenhauser Ford 223 2 X 1V Intake
Fenton Ford 223 2 X 1V Intake bolted to a Stock Ford Exhaust Manifold 1
Fenton Ford 223 2 X 1V Intake bolted to a Stock Ford Exhaust Manifold 2
Fenton Ford 223 2 X 1V Intake bolted to a Stock Ford Exhaust Manifold 3
Installed on a Ford 223 is the Fenton Ford 223 2 X 1V Intake bolted to a Stock Ford Exhaust Manifold 4