Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40,
mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry
rzcrisis, DoctorC, jamyers, Motorboy, fastpat, Silverback280, chad


<<< New Site Update >>>

DIY Crossflow Head

Moderator: Mod Squad

Stonebreaker
Registered User
Posts: 24
Joined: Sun Feb 25, 2018 5:09 pm

DIY Crossflow Head

Post #1 by Stonebreaker » Fri Mar 02, 2018 11:39 am

Image

User avatar
worken2much
Registered User
Posts: 657
Joined: Sat Jan 31, 2004 9:01 pm

Re: DIY Crossflow Head

Post #2 by worken2much » Sat Mar 03, 2018 12:34 pm

Empty post. What's the scoop?
Rule #1. Six Cylinder Racers Have Longer Cranks.
Rule #2. Unless your given name is Richard...don't be a dick.

Stonebreaker
Registered User
Posts: 24
Joined: Sun Feb 25, 2018 5:09 pm

Re: DIY Crossflow Head

Post #3 by Stonebreaker » Mon Mar 05, 2018 12:13 pm

They must have killed the hotlink. Luckily I downloaded a copy. I wonder what Gramps thinks of this?


HowToModV8HeadsToSix.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
worken2much
Registered User
Posts: 657
Joined: Sat Jan 31, 2004 9:01 pm

Re: DIY Crossflow Head

Post #4 by worken2much » Mon Mar 05, 2018 12:36 pm

Not sure if you are aware that "Gramps" is Bruce Sizemore. That is his cyl head from days gone by featured in the article.

Thanks for posting the link though, great stuff.

Worken2much
Rule #1. Six Cylinder Racers Have Longer Cranks.
Rule #2. Unless your given name is Richard...don't be a dick.

Wesman07
Registered User
Posts: 413
Joined: Tue Aug 23, 2016 10:00 am

Re: DIY Crossflow Head

Post #5 by Wesman07 » Mon Mar 05, 2018 2:43 pm

So many legends... such a small forum
In-lines we trust

86 f150 300 efi with advanced stock cam. Np435, Dana 60/ 10.25, 35" BFG's, four link front suspension with 12" travel fox coil overs, custom deaver leaf pack in the rear.

Stonebreaker
Registered User
Posts: 24
Joined: Sun Feb 25, 2018 5:09 pm

Re: DIY Crossflow Head

Post #6 by Stonebreaker » Mon Mar 05, 2018 2:46 pm

worken2much wrote:Not sure if you are aware that "Gramps" is Bruce Sizemore. That is his cyl head from days gone by featured in the article.

Thanks for posting the link though, great stuff.

Worken2much

I sort of wondered based on a couple of posts I came across in the forums.

Stonebreaker
Registered User
Posts: 24
Joined: Sun Feb 25, 2018 5:09 pm

Re: DIY Crossflow Head

Post #7 by Stonebreaker » Mon Mar 05, 2018 8:34 pm

Hey Gramps,

This is the coolest mod I've ever seen, bar none. I would love to hear what you had to go through to make this head work. I have a community college associate's degree in redneck engineering... but this is Ph.D. stuff. Beyond Ph.D. Any car club in the world would stand up and salute - from old school rat rods to rice rockets to McLaren and Ferrari guys. Well, maybe not the Ferrari owners, It's over their heads, but the Ferrari F1 team would absolutely get it.

WorldChampGramp
VIP Member
Posts: 181
Joined: Sat Jan 28, 2012 6:18 pm
Location: Fort Myers, Florida

Re: DIY Crossflow Head

Post #8 by WorldChampGramp » Tue Mar 06, 2018 8:15 am

Stay Tuned there are more exciting MODERN parts OLD SCHOOL thoughts coming. Gramps

Here is the 6-piece head in action and BTY the last pass I made down the 1/4 mile Labor Day 1978.
https://www.youtube.com/watch?v=3MKccurdKDQ

User avatar
woodbutcher
VIP Member
Posts: 2059
Joined: Tue Mar 21, 2006 10:14 pm
Location: LaFollette Tn.

Re: DIY Crossflow Head

Post #9 by woodbutcher » Tue Mar 06, 2018 3:17 pm

:D :beer: This looks like more fun to come.
Good luck.Have fun.Be safe.
Leo
"People never lie so much as after a hunt,during a war,or before an election".
Otto von Bismarck

Who is online

Users browsing this forum: No registered users and 13 guests