Just a little 200 with a turbo (specs, videos, etc)

Moderator: Mod Squad

thatblue_67stang
Registered User
Posts: 79
Joined: Fri Dec 22, 2017 8:25 pm
Contact:

Just a little 200 with a turbo (specs, videos, etc)

Post #1 by thatblue_67stang » Sun Oct 07, 2018 7:20 pm

Im not sure if im known on here yet but i have a 1967 I6 turbo 200. Car is loads of fun. Thought i would share the specs, build process, and some videos. What does everyone think? I know there is alot to improve on so share your thoughts. it works perfectly rn so im not making any drastic changes.

Specs:
Ford 200
Stock cam
stock pistons
stock rods
stock non adjustable rockers
289 valve springs
ARP headstuds
Felpro head gasket
rings gapped (i forget what i gapped it to)
milled of stock log intake
custom made short tube intake manifold
custom log style turbo manifold
Holley 2300 350cfm made to accept boost
Quick Fuel Billet Carburetor Metering Block 34-8QFT
#53 size power valve jets
#70 main jets
ebay (dont hate, if you dont push them they work dreams) turbo 50mm running 5psi going to 10psi
ebay intercooler
MSD 6al-2
MSD boost timing master (pulling 1* per psi just to be safe)
Summit racing HEI distributor (set to 12* initial)
Holley 4-25 psi fuel regulator
Summit electric fuel pump
ebay aluminum radiator
G-Plus Oil cooler

IMAGES OF THE PROCESS
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

VIDEO

https://vimeo.com/293849460


https://vimeo.com/293854160
Brayton
1967 Ford Mustang Coupe
200 Inline 6 Turbo Charged

Image Image

User avatar
bubba22349
Global Moderator
Posts: 8326
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #2 by bubba22349 » Sun Oct 07, 2018 8:16 pm

Nice build looks like a lot of fun too! :thumbup: :nod:
A bad day Drag Racing is still better than a good day at work!

I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

fast64ranchero
Registered User
Posts: 187
Joined: Wed Jun 30, 2004 2:58 am
Location: Boise ID

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #3 by fast64ranchero » Mon Oct 08, 2018 9:45 am

Nice to see another modified log head. Looks like it runs ok!
63 Ranchero,1965 Mercury Comet Convert V-8, 1978 Fairmont small six, mill'd off intake, 62-1 ET 12.332 @ 123.49 mph (gone)

thatblue_67stang
Registered User
Posts: 79
Joined: Fri Dec 22, 2017 8:25 pm
Contact:

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #4 by thatblue_67stang » Mon Oct 08, 2018 12:42 pm

fast64ranchero wrote:Nice to see another modified log head. Looks like it runs ok!



Runs great. It's alot of fun
Brayton
1967 Ford Mustang Coupe
200 Inline 6 Turbo Charged

Image Image

User avatar
JackFish
VIP Member
Posts: 2759
Joined: Thu May 26, 2005 7:31 pm
Location: Winnipeg Manitoba Canada

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #5 by JackFish » Mon Oct 08, 2018 1:56 pm

Wow, nice work! :thumbup:
1978 Ford Fairmont station wagon
1978 Ford Fairmont station wagon
Yup, I bought another one.
1996 Chevy Caprice 9C1 (3)
1999 Dodge Ram 2500

gus91326
Registered User
Posts: 95
Joined: Mon Jul 27, 2015 3:59 pm

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #6 by gus91326 » Mon Oct 08, 2018 5:34 pm

That is awesome! Looks well engineered. What octane do you run? Do you know your CR? Very well executed!

thatblue_67stang
Registered User
Posts: 79
Joined: Fri Dec 22, 2017 8:25 pm
Contact:

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #7 by thatblue_67stang » Mon Oct 08, 2018 6:22 pm

gus91326 wrote:That is awesome! Looks well engineered. What octane do you run? Do you know your CR? Very well executed!


I'm running strictly 93. And as for cr I have no idea but its stock compression
Brayton
1967 Ford Mustang Coupe
200 Inline 6 Turbo Charged

Image Image

bmbm40
Registered User
Posts: 1102
Joined: Tue Feb 22, 2005 6:25 pm
Location: Carson City, NV

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #8 by bmbm40 » Mon Oct 08, 2018 7:51 pm

Yes good quality build. Really enjoyed the videos and pics,should be inspirational to those considering a turbo.
66 Bronco-1970 250, NV3550, DSII, 4 turn ps, uncut, 1" bl, 2.5" sl, front disc, twin stick D 20, 30 x 9.50
NEXT- direct mount 1.08 on D8 head, power brakes, rear limited slip, 3G, electric fan, electric upgrades, custom curved DSII, header, 31" tires

New guy? Get the Falcon Performance Handbook and Ford six high performance parts from https://vintageinlines.com

thatblue_67stang
Registered User
Posts: 79
Joined: Fri Dec 22, 2017 8:25 pm
Contact:

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #9 by thatblue_67stang » Mon Oct 08, 2018 7:53 pm

bmbm40 wrote:Yes good quality build. Really enjoyed the videos and pics,should be inspirational to those considering a turbo.



Thank you feels good to get all this praise. Didnt know I was doing something that alot of people where scared to do. I'm 20 just building my dream car
Brayton
1967 Ford Mustang Coupe
200 Inline 6 Turbo Charged

Image Image

fakundo__92
Registered User
Posts: 23
Joined: Sat Sep 29, 2018 2:17 am

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #10 by fakundo__92 » Mon Oct 08, 2018 11:52 pm

Very good construction How many horses are you driving you know? :thumbup:

thatblue_67stang
Registered User
Posts: 79
Joined: Fri Dec 22, 2017 8:25 pm
Contact:

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #11 by thatblue_67stang » Tue Oct 09, 2018 8:26 am

fakundo__92 wrote:Very good construction How many horses are you driving you know? :thumbup:



I'm guessing like 125-150 but what really matters is torque. Yah horses means I can go fast but torque means how quick I can get there lol. But this thing is a torque machine rn. Hope to turn it up soon
Brayton
1967 Ford Mustang Coupe
200 Inline 6 Turbo Charged

Image Image

fast64ranchero
Registered User
Posts: 187
Joined: Wed Jun 30, 2004 2:58 am
Location: Boise ID

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #12 by fast64ranchero » Tue Oct 09, 2018 12:51 pm

I suspect your guessing of numbers is wrong unless you are running really low boost. Generally I go by, 15hp per lb. of boost + 20 to get to zero intake manifold pressure. 90hp stock, plus 20hp (just getting intake pressure to 0 psi) plus 15hp x boost psi.. usually comes out close.
63 Ranchero,1965 Mercury Comet Convert V-8, 1978 Fairmont small six, mill'd off intake, 62-1 ET 12.332 @ 123.49 mph (gone)

thatblue_67stang
Registered User
Posts: 79
Joined: Fri Dec 22, 2017 8:25 pm
Contact:

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #13 by thatblue_67stang » Tue Oct 09, 2018 2:34 pm

fast64ranchero wrote:I suspect your guessing of numbers is wrong unless you are running really low boost. Generally I go by, 15hp per lb. of boost + 20 to get to zero intake manifold pressure. 90hp stock, plus 20hp (just getting intake pressure to 0 psi) plus 15hp x boost psi.. usually comes out close.


I'm only running 5psi as of now. And a 200 has 75 hp to the wheels stock. So I'm guessing about 150
Brayton
1967 Ford Mustang Coupe
200 Inline 6 Turbo Charged

Image Image

fast64ranchero
Registered User
Posts: 187
Joined: Wed Jun 30, 2004 2:58 am
Location: Boise ID

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #14 by fast64ranchero » Tue Oct 09, 2018 3:48 pm

Sounds like it is well sorted now, as you increase boost if you have any questions let us know.
PS my milled off intake setup made 444 whp and 501 ft lbs. It was also blow through carb setup a lot like yours is.
63 Ranchero,1965 Mercury Comet Convert V-8, 1978 Fairmont small six, mill'd off intake, 62-1 ET 12.332 @ 123.49 mph (gone)

thatblue_67stang
Registered User
Posts: 79
Joined: Fri Dec 22, 2017 8:25 pm
Contact:

Re: Just a little 200 with a turbo (specs, videos, etc)

Post #15 by thatblue_67stang » Tue Oct 09, 2018 3:50 pm

fast64ranchero wrote:Sounds like it is well sorted now, as you increase boost if you have any questions let us know.
PS my milled off intake setup made 444 whp and 501 ft lbs. It was also blow through carb setup a lot like yours is.



WAIT WHAT. youre telling me u made 444 and 501 that would be a dream. how much boost did u run and was it stock internals? if you have a facebook or anyting i would love to chat instead of just messaging back and forth on this
Brayton
1967 Ford Mustang Coupe
200 Inline 6 Turbo Charged

Image Image

Who is online

Users browsing this forum: No registered users and 6 guests