If I were going to build my own manifolds, using a 1pc intake/exhaust flange, am I going to be able to get away with using 1 5/8" round tubing for both intake and exhaust?
I have drawings for such a flange.. (attached) and then the other day I was reading a thread in the big six forum area and spotted this
Foxbody with Turbo 300
I really like the exhaust side of his manifold, I'm not quite feeling the love on the intake side.. Sort of thinking that I'd replicate the exhaust side, then use a throttle body on the front and weld on some injector bungs right before it goes into the head. Or if I attempt it with a TBI first, maybe replicate a 4bbl manifold.
thoughts?
-ron
I have drawings for such a flange.. (attached) and then the other day I was reading a thread in the big six forum area and spotted this
Foxbody with Turbo 300
I really like the exhaust side of his manifold, I'm not quite feeling the love on the intake side.. Sort of thinking that I'd replicate the exhaust side, then use a throttle body on the front and weld on some injector bungs right before it goes into the head. Or if I attempt it with a TBI first, maybe replicate a 4bbl manifold.
Big6Turbo":1m5uyqsm said:
thoughts?
-ron