Turbo Header Options

Llink78

Well-known member
So i know there are quite a few threads on going turbo here. What have you all done for a exhaust header? I know you can use the stock and do a J pipe. But thats not acceptable for me. Iv seen a few options but looking for more or even someone selling parts!!!!
 
Fabricating your own exhaust probably is only way to locate turbo in a usable position in most vehicles without using a "J Pipe". Not aware of any aftemarket header solutions although nice turbo manifold for small ford six sold on here recently I believe.

Closer turbo is to exhaust outlet the better, it's thermal expansion more than velocity for turbo power (kudos to MacInnes)


I used a Buick derived Daw-Thru with a J-Pipe on a Maverick 250







'like to try a catalytic converter small six manifold for a turbo setup:





have fun
 
I have to keep the turbo as close to where my battery use to be. So custom is really my only option, running the aussie 2v head on my 69 250 block.
 
sick six , built remote turbo application on a half ton with startling result.
much to be said for the concept.
for him it worked out.
his turbo was under passenger floor.
 
i went totally custom everything. feel free to look at my instagram and scroll to the begining to see the whole process @thatblue_67stang

xzlVG79.jpg


lv158Pc.jpg


WOgmqO5.jpg


s4BAfMw.jpg


zZwEYEn.jpg
 
Back
Top