Turbo 4.9 f150

Here are some pics I found on my Instagram
 

Attachments

  • Screenshot_2019-05-27-19-21-32-1.png
    Screenshot_2019-05-27-19-21-32-1.png
    591.6 KB · Views: 171
  • Screenshot_2019-05-27-19-22-04-1.png
    Screenshot_2019-05-27-19-22-04-1.png
    507 KB · Views: 170
  • Screenshot_2019-05-27-19-22-16-1.png
    Screenshot_2019-05-27-19-22-16-1.png
    599.8 KB · Views: 171
  • Screenshot_2019-05-27-19-21-45-1.png
    Screenshot_2019-05-27-19-21-45-1.png
    572 KB · Views: 171
All finnished up with the new combination. Just waiting for a buddy to come over so I can get the cam broke in
 

Attachments

  • Message_1559501038139.jpg
    Message_1559501038139.jpg
    4.6 MB · Views: 159
Just made these plates up to mount twin T25 (K14 actually) to the Ford manifolds. They are 5/8 plate, tapered, drilled and counterbored for socket head cap screws. I drilled out the threaded stud holes in the manifolds to 15/32" and used 7/16 cap screws and nuts. I shortened the heads of the 7/16 screws a bit so I didn't have to counterbore too deep. If anyone is doing this I can supply the pattern file to plasma cut the plate to shape.

bo8gONm.jpg

6vfWWmt.jpg
 
Good job. Those should spool quick! I just started a new project. I'm putting my motor in a 98 ranger. This thing is going to be a beast. And I'm putting a pair of t3t4's where the radiator was. I have 1000hp worth of compressor now.
 
Back
Top