hi all, im about to put my new x-flow in my XE esp and i hope to get some strip time early next season.. here are the specs
C2 alloy head, 42cc chamber, ported and flowed to 238.4cfm with 1.85" inlet and 1.56" exhaust ferrea valves, 145lb springs..
shot peened and beam polished 200 conrods with ACL race series 8.6cc dish pistons.
EF 12 counterweight crank with romac balancer.
ARP head and conrod bolts.
crow solid cam, 288 adv, 244@50" and 557" lift.
ausiespeed 4 bl intake with a 650 demon carb.
custom extractors with 75-80cm primaries..
mr gasket electric water pump drive.
pic at, www.hotsixes.com/hotsixes/?page_id=5
cheers
C2 alloy head, 42cc chamber, ported and flowed to 238.4cfm with 1.85" inlet and 1.56" exhaust ferrea valves, 145lb springs..
shot peened and beam polished 200 conrods with ACL race series 8.6cc dish pistons.
EF 12 counterweight crank with romac balancer.
ARP head and conrod bolts.
crow solid cam, 288 adv, 244@50" and 557" lift.
ausiespeed 4 bl intake with a 650 demon carb.
custom extractors with 75-80cm primaries..
mr gasket electric water pump drive.
pic at, www.hotsixes.com/hotsixes/?page_id=5
cheers