Hello,
I am the proud owner of a 68 Coupe with the venerable 200 ci coupled to an auto trans.
It is as we call it a rolling project...she had a rough life and I slowly repair and upgrade her.
Her six is running great now, the C4 shifts well. A few upgrades are in the pipeline!!
regards
Ivan
Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2018 Contributors:
StarDiero75, curts56, DannyG, B RON CO, wsa111, Captainslow42, falconcritter
Econoline, THE FRENCHTOWN FLYER, 95FordFleetside, turbo6, Max_Effort, WorldChampGramp
cr_bobcat, C.S.Designs, pmuller9, gus91326, rwbrooks50, rocklord, drag-200stang, Big64my79Effie, CNC-Dude, gb500
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240
Unknown->> S.Wickett, D.Blaine - Please PM me (1966Mustang) and lemme know who you are!
2018 Contributors:
StarDiero75, curts56, DannyG, B RON CO, wsa111, Captainslow42, falconcritter
Econoline, THE FRENCHTOWN FLYER, 95FordFleetside, turbo6, Max_Effort, WorldChampGramp
cr_bobcat, C.S.Designs, pmuller9, gus91326, rwbrooks50, rocklord, drag-200stang, Big64my79Effie, CNC-Dude, gb500
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240
Unknown->> S.Wickett, D.Blaine - Please PM me (1966Mustang) and lemme know who you are!
Greetings from Belgium
Moderator: Mod Squad
Greetings from Belgium
68 Mustang coupe, 200 Ci I6, rolling project.... 

Re: Greetings from Belgium
Ivan, welcome aboard. You will discover a wealth of information from six owners. Bill
67 mustang,C-4, with mod. 80 hd, custom 500 cfm carb with annular boosters, hooker headers, dual exh.-X pipe, flowmaster mufflers, DSII dist. MSD-6al & TFI Coil. Engine 205" .030" over with offset ground crank & 1.65 roller rockers. 9.5 comp., Isky 262 cam.
2003 Ford Lightning daily driver. Recurving Distributors. billythedistributorman@live.com

2003 Ford Lightning daily driver. Recurving Distributors. billythedistributorman@live.com

- bubba22349
- Global Moderator
- Posts: 8664
- Joined: Sun Jan 03, 2010 4:46 pm
- Location: Flagstaff, Az. 86005 near the old Route 66
Re: Greetings from Belgium
Welcome to the Ford Six site Ivan, and congrats on your 68 Coupe post some pictures of your car when you can. Good luck



A bad day Drag Racing is still better than a good day at work!
I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone!
1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.
I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone!

Re: Greetings from Belgium
Sounds like a fun project and the 60's Mustangs are my favorite.
Are you aware of the Falcon Performance Handbook? It is very helpful.
Are you aware of the Falcon Performance Handbook? It is very helpful.
66 Bronco-1970 250, NV3550, DSII, 4 turn ps, uncut, 1" bl, 2.5" sl, front disc, twin stick D 20, 30 x 9.50
NEXT- direct mount 1.08 on D8 head, power brakes, rear limited slip, 3G, electric fan, electric upgrades, custom curved DSII, header, 31" tires
New guy? Get the Falcon Performance Handbook and Ford six high performance parts from https://vintageinlines.com
NEXT- direct mount 1.08 on D8 head, power brakes, rear limited slip, 3G, electric fan, electric upgrades, custom curved DSII, header, 31" tires
New guy? Get the Falcon Performance Handbook and Ford six high performance parts from https://vintageinlines.com
Re: Greetings from Belgium
Here is a pic when I first got to drive her....after a winter of welding , grinding, fixing brakes. I got a lot of help from my father, a retired aircraft tech.
.
And the almost correct motor...
.
I have a "few"
books on the mustang and of course the falcon performance manual!!!
Gtz
Ivan

And the almost correct motor...

I have a "few"

Gtz
Ivan
68 Mustang coupe, 200 Ci I6, rolling project.... 

Re: Greetings from Belgium
And this how she looks now...apart from the extreme large tires and the missing fake airintake at the side...


68 Mustang coupe, 200 Ci I6, rolling project.... 

Re: Greetings from Belgium
nice rims
greetzz,, JD
greetzz,, JD
http://www.youtube.com/watch?v=-hk0KF5bjTM (part1)
http://www.youtube.com/watch?v=pHXiaMfH ... re=related (part2)
http://www.youtube.com/watch?v=2i-Lnph9 ... detailpage (part3)running motor.
http://www.youtube.com/watch?v=pHXiaMfH ... re=related (part2)
http://www.youtube.com/watch?v=2i-Lnph9 ... detailpage (part3)running motor.
- bubba22349
- Global Moderator
- Posts: 8664
- Joined: Sun Jan 03, 2010 4:46 pm
- Location: Flagstaff, Az. 86005 near the old Route 66
Re: Greetings from Belgium


A bad day Drag Racing is still better than a good day at work!
I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone!
1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.
I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone!

Who is online
Users browsing this forum: No registered users and 2 guests