Hello All

Moderator: Mod Squad

New Member
Posts: 1
Joined: Tue Oct 31, 2017 9:09 am

Hello All

Post #1 by jackson6516 » Tue Oct 31, 2017 9:22 pm

Hello from Georgia, I'm the owner of a 1970 Ford Bronco with a 170 ci engine, 3spd transmission. Interested in mainly keeping it as original as practical while continuing to drive it. Looking forward to learning what you have been able to do with your Ford sixes.

User avatar
FSP Moderator
Posts: 2980
Joined: Sat Jan 24, 2004 5:28 pm
Location: South Carolina

Re: Hello All

Post #2 by wsa111 » Tue Oct 31, 2017 10:25 pm

Welcome aboard. You will enjoy the information available on this forum.
67 mustang,C-4, with mod. 80 hd, custom 500 cfm carb with annular boosters, hooker headers, dual exh.-X pipe, flowmaster mufflers, HEI dist. Engine 205" .030" over with offset ground crank & 1.65 roller rockers. 9.5 comp., Isky 262 cam.
2003 Ford Lightning daily driver. Recurving Distributors. billythedistributorman@live.com

Registered User
Posts: 1113
Joined: Tue Feb 22, 2005 6:25 pm
Location: Carson City, NV

Re: Hello All

Post #3 by bmbm40 » Tue Oct 31, 2017 10:38 pm

Good to hear about your Bronco and your plans. I would highly recommend getting the Ford Falcon Performance Handbook. It is a valuable resource with maintenance/tune up and performance info with detailed steps to get the most from your 170 while maintaining an original appearance. It is worth way more than the few dollars it cost.
66 Bronco-1970 250, NV3550, DSII, 4 turn ps, uncut, 1" bl, 2.5" sl, front disc, twin stick D 20, 30 x 9.50
NEXT- direct mount 1.08 on D8 head, power brakes, rear limited slip, 3G, electric fan, electric upgrades, custom curved DSII, header, 31" tires

New guy? Get the Falcon Performance Handbook and Ford six high performance parts from https://vintageinlines.com

User avatar
Global Moderator
Posts: 8364
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: Hello All

Post #4 by bubba22349 » Wed Nov 01, 2017 12:30 pm

A big welcome to what I think is the "Best Ford Six Site" jackson6516, you might also post some pictures of your Bronco when you can :thumbup: when you can. Good luck with the Bronco :nod:
A bad day Drag Racing is still better than a good day at work!

I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

Who is online

Users browsing this forum: No registered users and 4 guests