Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2018 Contributors:
StarDiero75, curts56, DannyG, B RON CO, wsa111, Captainslow42, falconcritter
Econoline, THE FRENCHTOWN FLYER, 95FordFleetside, turbo6, Max_Effort, WorldChampGramp
cr_bobcat, C.S.Designs, pmuller9, gus91326, rwbrooks50, rocklord, drag-200stang, Big64my79Effie, CNC-Dude, gb500

2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240

Unknown->> S.Wickett, D.Blaine - Please PM me (1966Mustang) and lemme know who you are!

New Guy in AR

Moderator: Mod Squad

New Member
Posts: 3
Joined: Sat Dec 30, 2017 10:57 pm

New Guy in AR

Post #1 by chevyconvert » Sun Dec 31, 2017 6:35 pm

Hello everyone,
I've had a thing for inline 6s since I started driving but I've only owned 3 so far. I've had a chevy 250 i6 in an 83 long bed and I've had a 94 F150 with 4.9 that had the m5od behind it. Recently I bought an 85 f150 with a 300 in it and somewhere along its life time someone put a 3.03 3 speed trans with a cheap floor shift conversion in it.
I've been getting a lot of good info from this forum by way of Google so I figured I'd go ahead and register so I could ask some questions that I can't find an answer to. I'm looking forward to getting some advice and maybe passing along some things I might experience to help someone else.

User avatar
Global Moderator
Posts: 8672
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: New Guy in AR

Post #2 by bubba22349 » Sun Dec 31, 2017 8:15 pm

Welcome chevyconvert to the very best Ford Six site, we have some very knowledgeable people and info. Good luck on your pickup project. :thumbup: :nod:
A bad day Drag Racing is still better than a good day at work!

I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

User avatar
FSP Moderator
Posts: 3060
Joined: Sat Jan 24, 2004 5:28 pm
Location: South Carolina

Re: New Guy in AR

Post #3 by wsa111 » Mon Jan 01, 2018 6:46 pm

Welcome aboard. You will find a wealth of information on this forum. Bill
67 mustang,C-4, with mod. 80 hd, custom 500 cfm carb with annular boosters, hooker headers, dual exh.-X pipe, flowmaster mufflers, DSII dist. MSD-6al & TFI Coil. Engine 205" .030" over with offset ground crank & 1.65 roller rockers. 9.5 comp., Isky 262 cam.
2003 Ford Lightning daily driver. Recurving Distributors.

Who is online

Users browsing this forum: No registered users and 2 guests