Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40, mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry, rzcrisis, DoctorC, jamyers, Motorboy, fastpat, Silverback280, chad, drag-200stang, THE FRENCHTOWN FLYER, Jimmys61falcon, rjonah, Sooshi, Robert92867, Invectivus


<<<***PLEASE READ*** New Site Update >>>

Spring perches

Moderator: Mod Squad

User avatar
Registered User
Posts: 249
Joined: Sun Mar 22, 2015 2:41 pm
Location: Lincoln, NE

Spring perches

Post #1 by 62Cometman » Fri Sep 29, 2017 12:55 am

I am in the process of replacing a bunch of my suspension parts but getting to the point where I should consider getting some spring perches, IIRC my original perches use a greaseable bronze bushing and I've heard from others that these are superior to most replacement rubber bushing ones. Should I just reuse my originals and clean them up and maybe replace the rubber insulating pads on them or would it be worth while to get new ones anyway?
1962 Mercury Comet 170 ci, Dagenham Trans, 2.83:1 7.25 rear.
She ain't fast but she's fun. 8)

User avatar
Global Moderator
Posts: 10436
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: Spring perches

Post #2 by bubba22349 » Fri Oct 06, 2017 4:38 pm

If your talking about the lower spring / shock mounts, and the orginals are still in good condition yes then use them they are better then the rubber bushing types for performance driving use. The only better ones are to use the roller spring conversion kit. If you just want lower maintance i.e. not needing to grease them and for regular street driving then the rubber ones are a good way to go. This is the only reason Ford started useing the rubber bushings it was for less cost and less Maintance. Save the originals though and if you want to sell them people like me will be interested in them for a perforance build up. Good luck on your rebuild :nod:
Even a bad day Drag Racing is still better than a good day at work!

Current project is a 1988 John Deere 420 Garden Tractor I need a few small parts to get it fixed, plus some cosmetic items, maybe a few attachments, if you happen to have or know of JD 420 parts would welcome the help!

My Ex-Inline 6 Fleet 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

Who is online

Users browsing this forum: No registered users and 7 guests