Intake Gaskets

Moderator: Mod Squad

Inline6Merc
Registered User
Posts: 326
Joined: Fri Jul 23, 2004 1:53 pm
Location: SF Bay Area

Intake Gaskets

Post #1 by Inline6Merc » Tue Oct 08, 2013 11:52 pm

I need to make a new set of gaskets for my intake. Any suggestions on materials and or methods? Does CI stock gaskets for the new intake? Last I knew they only had the old OZ-250 gaskets that don't fit properly on the CI intake.

Thanks,

Curtis
64 Mercury Comet 204c.i.
DUI Ignition
Clifford dual out headers
10.2 to 1 Compression
CI Aluminum Head/Intake Manifold
480cfm Autolite 4 bbl
278 Solid Lifter Cam
1.6 ratio Roller Rockers
2500 Stall Converter
C4 Transmission
3.50gears
8inch Rear End

170-3tree
Registered User
Posts: 351
Joined: Thu Mar 26, 2009 7:05 pm
Location: KC, Kansas area

Re: Intake Gaskets

Post #2 by 170-3tree » Wed Oct 09, 2013 8:34 am

No. You can make your own from gasket paper from any auto parts store. I made one because I had a leak at the intake, then sprayed copper coat on both sides because the paper I got was thinner than I wanted.
63 Fairlane Sedan, 200 bored .030 over. Aluminium head. Autolite 2100 1.08. DUI ignition. 274/274-112* Hyd. 9.5:1 compression. ARP bottom end. 2.77 3 on the tree(until she blows I guess) 8 inch 3.55 rear 5 lug all standard on fairlane.
2010 Mazda 3s 2.5l L4 6spd manual
1957 Chevy Belair 4dr post, 283/powerglide

Who is online

Users browsing this forum: No registered users and 1 guest