GA - Atlanta/Chattanooga area

Moderator: Mod Squad

77 F100 Flatbed
Registered User
Posts: 23
Joined: Thu Apr 30, 2009 7:32 pm

GA - Atlanta/Chattanooga area

Post #1 by 77 F100 Flatbed » Tue Jun 30, 2009 9:40 pm

:thanks:

CNC-Dude
Registered User
Posts: 1375
Joined: Wed Nov 19, 2008 6:06 pm
Location: N. Ga.
Contact:

Re: Any Good shops in the Atlanta/Chattanooga area

Post #2 by CNC-Dude » Wed Jul 01, 2009 1:02 pm

MV Performance around Winder,Ga. is a Ford only based speed shop and performance center, they have worked closely with Jon Kaase in the past, and Kaase does all of their machine work, or at least used too....Tim Matherly(the M in MV), has many NMCA records and wins,his partner, Kainnon Vilminot(the V in MV), also has many NMCA credentials to his resume, and im sure they can do you a good job.
Image

User avatar
Eric Rose
Registered User
Posts: 544
Joined: Tue Sep 11, 2007 3:57 pm
Location: Athens, GA

Re: Any Good shops in the Atlanta/Chattanooga area

Post #3 by Eric Rose » Wed Jul 01, 2009 3:26 pm

Larry Smith Rome, GA. About halfway between Atlanta and Chattanooga. Larry built my motor and did a great job. :thumbup:

706-295-3121 is the number to his shop.
I got 350 heads on a 305 engine. I get 10 miles to the gallon, I ain't got no good intentions.
- Mike Cooley, aka the Stroker Ace.

77 F100 Flatbed
Registered User
Posts: 23
Joined: Thu Apr 30, 2009 7:32 pm

Re: Any Good shops in the Atlanta/Chattanooga area

Post #4 by 77 F100 Flatbed » Sat Jul 04, 2009 9:41 am

[quote="Eric Rose"]Larry Smith Rome, GA. About halfway between Atlanta and Chattanooga. Larry built my motor and did a great job. :thumbup:

706-295-3121 is the number to his shop.[/quote]

:) Thanks ya'll I will give him a call.

falconjack
Registered User
Posts: 6
Joined: Thu Jan 12, 2012 1:51 pm

Re: GA - Atlanta/Chattanooga area

Post #5 by falconjack » Fri May 17, 2013 12:46 pm

I used Larry Smith in Rome Ga. too. I cut off the intake on a 200 head and fabricated my own intake. The machine shop in my town did not even want to touch it.
Larry put in the new larger CI stainess valves and spring, mill .020" off and resurfaced the exhaust flages, put in new freeze pluges and he was happy to do it. Great guy, excellent work, very good prices too.

Who is online

Users browsing this forum: No registered users and 1 guest