Machine shops and engine builders?

Moderator: Mod Squad

User avatar
AzCoupe
Administrator
Posts: 1433
Joined: Sat Nov 09, 2002 10:26 am
Location: Mesa, AZ

Machine shops and engine builders?

Post #1 by AzCoupe » Wed Jul 28, 2010 9:05 pm

We are getting a pretty good list started in Machine Shops & Engine Builders, but we still need a lot more. I currently have several customers looking for a good mechanic that can tune their motors. More specifically the carb and ignition timing. Most have recently rebuilt their motors, but can't get them to idle or run properly. Many are so frustrated they're ready to sell their cars, or tow them to the junk yard and sell them for scrap. So if you know of a good shop or mechanic, or someone that can tune Weber carbs, please post the information. If we have any forum members that are willing to help out and make a few extra bucks, especially tuning Weber carbs, please let us know. If you don't want to post your info, but wouldn't mind helping out occasionally, send me a PM. Right now, I have a customer in Vermont that's ready to pull his hair out. I've tried to help him out over the phone and by email, but he just isn't mechanically inclined. He's had the car towed to several shops, which were recommended, but none of them have been able to help him out. They simply don't know how to tune a carb and/or set the timing on an old fashion six. If it doesn't have injectors and an EMS, their totally lost....
Looking for Performance Parts, see Classic Inlines
Mike

Image

Click here for larger image & info

User avatar
jem44357
Registered User
Posts: 84
Joined: Sun Aug 12, 2007 11:38 am
Location: Whitmore Lake Mi

Re: Machine shops and engine builders?

Post #2 by jem44357 » Sun Dec 19, 2010 3:43 pm

The web site says he will travel to you. It may be a few $$$ but I think he might know a bit about Webers.

http://www.jiminglese.com/

Jim
Preception is 9/10 reality
MK3.1 Roadster comp kit 6533 3-10-08
78/309 Inline,Clifford Performance intake,3 Weber 45 DCOE carbs,DUI ign.,TCI AODE SF,Outlaw shift w/paddles
Sonic Blue/platinum stripes,Centerline Sundance Galaxy wheels,SS trans tunnel w/swirl effect,silver-vein powder coat panels/no carpet.
Upgrades: Ali. head,cam,Redline Weber TBI,Elec H2O/fuel/steer.

WestCoastComet
Registered User
Posts: 36
Joined: Thu Jan 06, 2011 1:49 pm
Location: Los Angeles, CA

Re: Machine shops and engine builders?

Post #3 by WestCoastComet » Wed Jan 12, 2011 11:21 am

Anyone in the Whittier / East Los Angeles area should give Kurt at Engine Parts Service a call. It's a machine shop. He does pretty much all basic assembly of short blocks. He doesn't really tune anything, so sorry if I'm recommending a shop that doesn't tune. He does military and tank motors, diesel motors, even dragster motors, I think. He certainly had no problems freshening my lil' ol' six head. Gave me great labor prices, too. 300 bucks parts/labor roughly for a head job. He can press new seats and stuff too. He'll let you come in the shop and check out all the machines, and talk to you for an hour if he has to. I highly recommend his shop.

Engine Parts Service Precision Machine Work

Phone: 562-945-1320

7337 Whittier Ave.

Whittier, CA. 90602
"You can run, but you can't glide!"

1972 Mercury Comet, 200, C-4.

62RatRod
Registered User
Posts: 21
Joined: Wed Jan 04, 2012 2:25 am

Re: Machine shops and engine builders?

Post #4 by 62RatRod » Thu Jan 05, 2012 10:47 am

Custom Engine and Parts out of Longview, Tx is a very good machine shop for anyone looking for a machinist in east Texas. It's a very small shop run by an older man and his wife but it's a labor of love for them and they are very cheap and friendly. I have to watch the clock every time I go there or I'll end up talking with them for hours..
Phone number: 903 758 0241

Also in Longview is a hot rod shop called East Texas Muscle. I've never had any of my cars worked on there but I always hear good things about them. They have a dyno as well so I'm sure with all the cool doohickeys they got they could tune just about any engine.

If you have no luck with them there's like 2 other shops n Longview.. Haven't heard much about them but the newest one supposedly charges out the a$$ :thumbdown: maybe you get what you pay for but I'll have to check it out some day

User avatar
Cool23
Registered User
Posts: 678
Joined: Thu Mar 01, 2007 7:20 pm
Location: Castlemaine Australia
Contact:

Re: Machine shops and engine builders?

Post #5 by Cool23 » Thu Jan 05, 2012 4:18 pm

jem44357 wrote:The web site says he will travel to you. It may be a few $$$ but I think he might know a bit about Webers.

http://www.jiminglese.com/

Jim


Jim sold out to Total Performance ( used to build T Buckets) years ago then purchased the business back when Total Perf sold out to Speedway Motors. Jim Inglese has a wealth of knowledge in the area of Webers.
V8's are great but Six Inlines Just Fine. Cummins Advert.

The link to my project on this forum http://fordsix.com/forum/viewtopic.php?t=41598

User avatar
FalconSedanDelivery
Registered User
Posts: 914
Joined: Wed Jul 11, 2007 7:20 pm
Location: Freeburg Pa
Contact:

Re: Machine shops and engine builders?

Post #6 by FalconSedanDelivery » Sat Jan 07, 2012 10:11 pm

I am throwing My Shop into this Mix , I specialize on Tuning and setting up Combos either from scratch or fixing problematic purchases, or previous builds, I am fan and very familiar with the Falcon 6 , I am in Central Pa , My Shop phone is 570-847-6282 , My Name is Faron Rhoads , and feel free to Google it . The Name of My Shop is Total Performance Ent. of Pa , feel free to E-mail me at TotalPerfEntofPa@aol.com or call with questions , please leave a message
Falcon 6's, FE's I Like them both , Sold all My 6 cyl stuff ( for now at least ) glad to pass along some tips though

66broncoroadster
New Member
Posts: 1
Joined: Fri Jan 20, 2012 11:03 pm

Re: Machine shops and engine builders?

Post #7 by 66broncoroadster » Wed Jan 25, 2012 1:33 am

Newguy here but Bell Auto on McDowell between Hayden and Pima in Scottsdale AZ is the last shop I know of which specializes in tuning carbureted engines.

I give hi praise to Scottsdale Automotive Machine shop near Thomas and Scottsdale road in Scottsdale for machine work, they have built four motors for me which continue to turn.

Seattle Smitty

Re: Machine shops and engine builders?

Post #8 by Seattle Smitty » Mon Mar 12, 2012 12:21 am

There's quite a bit of Weber tuning info to be had on-line, and a book, "Weber Carburetors," Pat Braden, HP Books.

User avatar
The_DropOut
Registered User
Posts: 61
Joined: Thu Feb 16, 2012 11:28 pm
Location: Portland Oregon

Re: Machine shops and engine builders?

Post #9 by The_DropOut » Thu Mar 29, 2012 1:06 am

Portland Oregon.

Portland Engine Rebuilders is a small old school shop located in inner SE on Hawthorne. This place is great, good service, final price very close to estimate. You have to step over the motors which are comming & going.

Auto Repair Specialties is a small tune up shop located in SE Portland on Division near the Gresham boarder. This place is great. They have knowledge on old motors and do a great job. They also have a Dyno!!
1962 Ranchero - 6 in a row, Ready to go!
∙ ♠ ∙ ♦ ∙ ♥ ∙ ♣ ∙

sdiesel
Registered User
Posts: 358
Joined: Fri Jan 06, 2012 12:33 am
Location: NW Oregon,Buxton currently

Re: Machine shops and engine builders?

Post #10 by sdiesel » Mon Apr 02, 2012 2:51 am

MACHINE SHOP

I can personally recommend two great shops in the NW Oregon / SW washington area.


Portland Oregon: Jobbers Service did a beautiful and cheap job on my overbore and decking .
Also the very lowest prices on engine parts they are a Wholesaler to the industry ; very highly recommended .


Down River
Longview Washington: in Machining there is never close enough, Right is the only way to do it.
Castle diesel and machine IS more consistently accurate in this than any i have seen. Bill Castle runs a simply amazing shop. And he is one of a very few who does line boring to keep crank centerlines in place.
single cylinder motorcycle to v16 diesels come outta that shop ready to work.
a long love affair with the 300 six.
my lastest and final fling is a fresh 300 in an 88 ford f350 dually 4X flatbed

1965Pony6
New Member
Posts: 1
Joined: Mon Aug 14, 2017 4:53 pm

Re: Machine shops and engine builders?

Post #11 by 1965Pony6 » Mon Mar 05, 2018 8:13 pm

Hello, I am currently building a high performance street head for our 1965 Mustang. Its a 200 cu in block and the head is from a 1980 Granada. We purchased the head from Hoctors hidden valley auto parts in Maricopa Arizona. Had it crack checked at S&S Machine in Mesa Arizona, who suggested I take it B&B in Mesa for the required welding to open up the intake to accept a Holley 2 BBL carb (or fuel injection). While it was there Jim Basko from Basko Machine arrived to bring some parts to Bill Carroll, Jim saw the head and advised that he had performed the modification, Bill checked with me and Jim did the welding. Head returned to B&B for machine work and seals and core plugs. I'm happy with the work, and will keep you updated with the progress

Who is online

Users browsing this forum: No registered users and 1 guest