Fuel Injected 200 NA

Moderator: Mod Squad

MustangMatt5
New Member
Posts: 3
Joined: Thu Oct 04, 2018 9:12 pm

Fuel Injected 200 NA

Post #1 by MustangMatt5 » Fri Oct 05, 2018 7:55 pm

Hello everyone, I am new here but have used the forum as a good resource in the past.
I have started on a project to fuel inject my 1968 Mustang.

Here is the setup so far:
Ignition:
1.Stock Points Distributor
2. Stock Coil

Fuel:
1. Holly Sniper 7psi Electric Fuel pump
2. Edelbrock Adjustable Universal EFI Fuel Sump running 58 PSI

I am running a Microsquirt V3 kit and I have built a custom intake and fuel rail.
Attached to my Intake manifold is a Ford 3.8l Throttle body.

At this time I have successfully wired the ECU and added my supporting mods to supply fuel and to provide a clean tach signal to MS.
I also have been successful in getting the car to run, however, not for long I usually only get about 30 seconds before she stalls.
I'm still learning the tuning process and how to manage the tables.
I was hoping others might have suggestions and experience in this process (specific to this engine) and a source for a close base map I can compare my tune against.

User avatar
wsa111
FSP Moderator
Posts: 2984
Joined: Sat Jan 24, 2004 5:28 pm
Location: South Carolina
Contact:

Re: Fuel Injected 200 NA

Post #2 by wsa111 » Fri Oct 05, 2018 8:21 pm

On the Sniper you have to lock out the centrifugal advance.
I would recommend to get rid of the points & go with a DS11 distributor.
Use an MSD-6al & a Blaster 2 or 3 coil if you want the best. The DS11 will also need to have the advance locked out.
67 mustang,C-4, with mod. 80 hd, custom 500 cfm carb with annular boosters, hooker headers, dual exh.-X pipe, flowmaster mufflers, HEI dist. Engine 205" .030" over with offset ground crank & 1.65 roller rockers. 9.5 comp., Isky 262 cam.
2003 Ford Lightning daily driver. Recurving Distributors. billythedistributorman@live.com
Image

MustangMatt5
New Member
Posts: 3
Joined: Thu Oct 04, 2018 9:12 pm

Re: Fuel Injected 200 NA

Post #3 by MustangMatt5 » Fri Oct 05, 2018 8:49 pm

Hi WSA111, Thanks. Yeah i plan to upgrade the Dizzy in the future ive looked at the DS11 and will keep that in mind. I also have been considering the pertonix. I'm keeping the points for the time being mostly because they work well and I'm actually using an MSD 8918 GMR signal pickup that gives me a clean signal to the MS ecu.

I need to get some better photo's but i added an image of my current setup.
You do not have the required permissions to view the files attached to this post.

bmbm40
Registered User
Posts: 1117
Joined: Tue Feb 22, 2005 6:25 pm
Location: Carson City, NV

Re: Fuel Injected 200 NA

Post #4 by bmbm40 » Sat Oct 06, 2018 8:41 pm

Your project is looking good. Fuel injection is definitely some work but brings a lot of benefits.
66 Bronco-1970 250, NV3550, DSII, 4 turn ps, uncut, 1" bl, 2.5" sl, front disc, twin stick D 20, 30 x 9.50
NEXT- direct mount 1.08 on D8 head, power brakes, rear limited slip, 3G, electric fan, electric upgrades, custom curved DSII, header, 31" tires

New guy? Get the Falcon Performance Handbook and Ford six high performance parts from https://vintageinlines.com

gus91326
Registered User
Posts: 95
Joined: Mon Jul 27, 2015 3:59 pm

Re: Fuel Injected 200 NA

Post #5 by gus91326 » Sun Oct 07, 2018 10:05 am

Thats neat! Do you have pics of the passenger side?

MustangMatt5
New Member
Posts: 3
Joined: Thu Oct 04, 2018 9:12 pm

Re: Fuel Injected 200 NA

Post #6 by MustangMatt5 » Sun Oct 14, 2018 3:47 pm

Sorry for the delay in getting a response out. I got a little busy last week. Here is the image requested. You'll note i am using an Offy Tripower intake that came on my car when i purchased it about 9 years ago.

Update: i have successfully got the engine to run and idle. I found I was having an issue of losing Tach Sync once the engine switched from cranking to running. I am starting the task of learning how to tune the engine via software instead of using screwdrivers :)
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 4 guests