Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40, mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry, rzcrisis, DoctorC, jamyers, Motorboy, fastpat, Silverback280, chad, drag-200stang, THE FRENCHTOWN FLYER, Jimmys61falcon, rjonah, Sooshi, Robert92867, Invectivus


PLEASE TEST ON http://dev.fordsix.com

<<<***PLEASE READ*** New Site Update >>>

5/16-18 front body fastener goes where?

Moderator: Mod Squad

Robert92867
Registered User
Posts: 16
Joined: Sat Oct 07, 2017 2:32 pm

5/16-18 front body fastener goes where?

Post #1 by Robert92867 » Sat Apr 07, 2018 4:06 pm

During my '66 coupe restoration,
IMG_1326.JPG
I failed to properly tag this unusual hex nut with dished washer. I have a few. Does anybody know where they are used? I'm thinking fender or inner fender.
You do not have the required permissions to view the files attached to this post.
"66 Mustang 200. Au 250-2v head. Aussiespeed 4v intake. DUI. Clay Smith # H-274-0-R cam. 9.5 cr. 110 lc. C4. 3.20 final drive. Autolite 2100 1.21. Scott Drake single outlet header. 2.5" single exhaust. New engine, never cranked. Car undergoing 2 year rotisserie restoration.

User avatar
B RON CO
VIP Member
Posts: 874
Joined: Tue Apr 05, 2016 7:02 pm
Location: Long Island, NY
Contact:

Re: 5/16-18 front body fastener goes where?

Post #2 by B RON CO » Sun Apr 08, 2018 10:22 am

Hi, my Mustang has 2 nuts like that on the hood latch to the radiator support. The nuts are close to the radiator. 2 nuts like that are also on the battery hold down bolts. Good luck
B RON CO. Still workin' on it!

1933 Ford Pickup - 59A Flathead V8
1966 Ford Bronco - U14 - 170/200 Straight 6
1966 Ford Mustang - 289 V8

Who is online

Users browsing this forum: No registered users and 2 guests