200 block w/pan & crank for new item ! Florida

Moderator: Mod Squad

DannyG
VIP Member
Posts: 106
Joined: Thu Dec 31, 2015 10:49 pm
Location: Long Island, NY

200 block w/pan & crank for new item ! Florida

Post #1 by DannyG » Fri Nov 04, 2016 9:01 am

Hey Guys,
I've been in touch with Kevin from www.crank-scrapers.com , and asked if he could build a scraper for our 200's. He said he would consider it, but he'd need an engine to build it off of.
He's located in Florida, anyone have any leads for a hopefully free or very low cost engine ( doesn't have to run , nor have a head )? His PO box is in the Land O Lakes region, I'd assume he's close to that location.
Let's keep an eye out !
Thanks,
DannyG

User avatar
65-coupe
Registered User
Posts: 309
Joined: Sat Aug 13, 2011 10:43 pm
Location: Lakeland Fl

Re: 200 block w/pan & crank for new item ! Florida

Post #2 by 65-coupe » Sat Nov 05, 2016 4:10 pm

I might be able to bring him one. That is about on hour from me.
1965 Mustang coupe, Poppy red with black interior, I6, DUI, CI alum head ported, 264/264 110 Clay Smith cam, 1.65 roller rockers, Autolite 2100 300CFM, Lokar pedals and throttle calbe, Spectre air intake. Shelby mod to front suspension, CI headers stainless with Jet-Hot ceramic coating, CI Stainless 2" impostor dual exhaust, 17x8 Coys C-67 wheels,

DannyG
VIP Member
Posts: 106
Joined: Thu Dec 31, 2015 10:49 pm
Location: Long Island, NY

Re: 200 block w/pan & crank for new item ! Florida

Post #3 by DannyG » Sun Nov 06, 2016 7:39 am

Cool !
Here is his email address, if you'd like to make contact ?

sales@crank-scrapers.com

Keep us posted, this could be great for our engines.
DannyG

DannyG
VIP Member
Posts: 106
Joined: Thu Dec 31, 2015 10:49 pm
Location: Long Island, NY

Re: 200 block w/pan & crank for new item ! Florida

Post #4 by DannyG » Thu Nov 17, 2016 10:05 pm

Bump/ Still looking for a test engine block ?

User avatar
65-coupe
Registered User
Posts: 309
Joined: Sat Aug 13, 2011 10:43 pm
Location: Lakeland Fl

Re: 200 block w/pan & crank for new item ! Florida

Post #5 by 65-coupe » Thu Nov 17, 2016 10:47 pm

I have it I just have not had time to get with him. I will try to email him tomorrow.
1965 Mustang coupe, Poppy red with black interior, I6, DUI, CI alum head ported, 264/264 110 Clay Smith cam, 1.65 roller rockers, Autolite 2100 300CFM, Lokar pedals and throttle calbe, Spectre air intake. Shelby mod to front suspension, CI headers stainless with Jet-Hot ceramic coating, CI Stainless 2" impostor dual exhaust, 17x8 Coys C-67 wheels,

User avatar
65-coupe
Registered User
Posts: 309
Joined: Sat Aug 13, 2011 10:43 pm
Location: Lakeland Fl

Re: 200 block w/pan & crank for new item ! Florida

Post #6 by 65-coupe » Sun Mar 12, 2017 8:36 pm

Well it took awhile but Kevin came and picked up the engine up today. He did not know when he would have it ready. Just updating everyone.
1965 Mustang coupe, Poppy red with black interior, I6, DUI, CI alum head ported, 264/264 110 Clay Smith cam, 1.65 roller rockers, Autolite 2100 300CFM, Lokar pedals and throttle calbe, Spectre air intake. Shelby mod to front suspension, CI headers stainless with Jet-Hot ceramic coating, CI Stainless 2" impostor dual exhaust, 17x8 Coys C-67 wheels,

DannyG
VIP Member
Posts: 106
Joined: Thu Dec 31, 2015 10:49 pm
Location: Long Island, NY

Re: 200 block w/pan & crank for new item ! Florida

Post #7 by DannyG » Tue Mar 21, 2017 2:23 pm

That's great news, Thank you for your help on this !
DannyG

JayBayBay
Registered User
Posts: 8
Joined: Tue Oct 20, 2015 11:39 pm
Location: Naples,Florida

Re: 200 block w/pan & crank for new item ! Florida

Post #8 by JayBayBay » Mon Jul 17, 2017 9:10 pm

Any word on the pan being developed?

DannyG
VIP Member
Posts: 106
Joined: Thu Dec 31, 2015 10:49 pm
Location: Long Island, NY

Re: 200 block w/pan & crank for new item ! Florida

Post #9 by DannyG » Mon Jul 24, 2017 3:02 pm

Still in the works. May take a while longer still.
DannyG

Who is online

Users browsing this forum: No registered users and 1 guest