Front Bench seat

Moderator: Mod Squad

User avatar
chad
Registered User
Posts: 3538
Joined: Sat Oct 24, 2009 9:51 am
Location: Lawrence Swamp, S. Amherst, MA

Front Bench seat

Post #1 by chad » Thu Mar 01, 2018 1:18 am

approximately 53 inches long (I bet a falcon, early stang, etc would fit).

I can use just bout any condition but would like all the parts. I've chased pic of just rusty springs w/sliders/mounts, some had a lill foam, others even with decent covers.

I've been on the search for several decades. Get pretty close at times but: they won't ship, or they were just pullin my leg, or suddenly the price goes outta control ($700). C one in a 'junk yard' - let me know. Someone dumpin one outta a bronk is best cuz the 2 sides R of different hight!

I never saw them in a Bronk but that's what it'll go in - they DID have em. That's Y I need most parts. I can fab so broken is alright, it's just best if the parts R there to copy/fab. My contact is in the below sig. E-mail is best but I will take PMs & phone is probable worse - all work tho.

Thanks for any info or the actual part!
"Big thing is only make one change at a time. Change 2 or more things at a time it becomes difficult to figure which change helped or hurt" turbo2256b » 1/16/2017
Chad - '70 LUEB on '77 frame (i.e. PS, D44, trapezoidal BB 9", 4.11), 250, NV 3550 & DSII to B transplanted, "T" D20/PTO, 2" SL, 1" BL, 4 discs, 33"X15", etc. Seeking: Hydraulic gear motor for Koenig pto. chrlsful@aol.com (413) 259-1749

bmbm40
Registered User
Posts: 999
Joined: Tue Feb 22, 2005 6:25 pm
Location: Carson City, NV

Re: Front Bench seat

Post #2 by bmbm40 » Thu Mar 01, 2018 8:58 pm

Yes they did have them and that is what I have with the bulkhead also. If you are tall it may be slightly annoying at times as the top of the windshield frame may obscure traffic lights sometimes when stopped at an intersection. If you can find one they are always overpriced and knowing Ford they are probably the same basic seat found in pick ups or maybe Falcons and other just with a different set of mounts to accommodate the uneven floor pan height.
66 Bronco-1970 250, NV3550, DSII, 4 turn ps, uncut, 1" bl, 2.5" sl, front disc, twin stick D 20, 30 x 9.50
NEXT- direct mount 1.08 on D8 head, power brakes, rear limited slip, 3G, electric fan, electric upgrades, custom curved DSII, header, 31" tires

'81 F150 4x4 300

New guy? Get this>http://www.falcon6handbook.com

User avatar
chad
Registered User
Posts: 3538
Joined: Sat Oct 24, 2009 9:51 am
Location: Lawrence Swamp, S. Amherst, MA

Front Bench seat

Post #3 by chad » Thu Mar 01, 2018 10:01 pm

"...different set of mounts to accommodate the uneven..."
actually it's in the sliders/mounts:


[imagecap][facebookpost]

[image] [/image]

Never seen em but these pic show it's not the frame as I always thought...

Any 1 gettin rid of a bench from their sedan/coupe ? I got a 170 or 250 motor to trade. 8^ )

sorry, last 3 pic R duplicates, can't edit out 2...
You do not have the required permissions to view the files attached to this post.
"Big thing is only make one change at a time. Change 2 or more things at a time it becomes difficult to figure which change helped or hurt" turbo2256b » 1/16/2017
Chad - '70 LUEB on '77 frame (i.e. PS, D44, trapezoidal BB 9", 4.11), 250, NV 3550 & DSII to B transplanted, "T" D20/PTO, 2" SL, 1" BL, 4 discs, 33"X15", etc. Seeking: Hydraulic gear motor for Koenig pto. chrlsful@aol.com (413) 259-1749

chero1369
Registered User
Posts: 49
Joined: Tue Dec 01, 2009 9:49 am
Location: slowdeatha,Tx

Re: Front Bench seat

Post #4 by chero1369 » Sat Mar 10, 2018 10:19 am

Can you use the one out of my 62 chero?Kinda decent with only one spring sticking out of a fairly(?) fresh seat cover,right behind the driver on the back.
You know my problem with pics,but I'll try.Might work in email.....
I'll get over to the other house and try the shaky cam and send pic soon. YOU figure shipping,not enough beer..

bmbm40
Registered User
Posts: 999
Joined: Tue Feb 22, 2005 6:25 pm
Location: Carson City, NV

Re: Front Bench seat

Post #5 by bmbm40 » Sat Mar 10, 2018 7:35 pm

Greyhound used to ship various items for not to much money.
66 Bronco-1970 250, NV3550, DSII, 4 turn ps, uncut, 1" bl, 2.5" sl, front disc, twin stick D 20, 30 x 9.50
NEXT- direct mount 1.08 on D8 head, power brakes, rear limited slip, 3G, electric fan, electric upgrades, custom curved DSII, header, 31" tires

'81 F150 4x4 300

New guy? Get this>http://www.falcon6handbook.com

User avatar
chad
Registered User
Posts: 3538
Joined: Sat Oct 24, 2009 9:51 am
Location: Lawrence Swamp, S. Amherst, MA

Front Bench seat: bronk, chero, falcon, stang, grenad-a; other pre-fox

Post #6 by chad » Sat Mar 10, 2018 8:23 pm

"Hi" 2 both #4 & #5 comments.

Yes! I think it would...
chero1369 - thanks so much for respondin!

Our vehicles R very similar - except the bronk has an aux gas tank under the driver's floor so the floor is quite a bit higher on that side than the pass's side. However, w/some extensive wrk I can figure some way to make a frame to hold up the pass side of ur seat in my vehicle... Currently in my thoughts I can imagine a 'non adjustable' seat (can't slide forward'n back) made frm ur 'chair' if ur willing to pack, ship and collect some dinero. I bet they're similar in width so a 'chair' could match...

I need a seat abt 53 inches long, and abt 14 inches as a seating space (width 4 ur tail bone). Does that bench U have come close to that? This is frm memory only so if ur willing to hang wid me I'll get more specific (go out'n measure).

BTW: the ur bench comes apart @ the hinge. U can place it 'frnt' to 'frnt' or 'spring's to 'springs' (I think that would B beddah than otherwise, may B not) & truss it with twine, to cover or box 4 shipment.
"Big thing is only make one change at a time. Change 2 or more things at a time it becomes difficult to figure which change helped or hurt" turbo2256b » 1/16/2017
Chad - '70 LUEB on '77 frame (i.e. PS, D44, trapezoidal BB 9", 4.11), 250, NV 3550 & DSII to B transplanted, "T" D20/PTO, 2" SL, 1" BL, 4 discs, 33"X15", etc. Seeking: Hydraulic gear motor for Koenig pto. chrlsful@aol.com (413) 259-1749

chero1369
Registered User
Posts: 49
Joined: Tue Dec 01, 2009 9:49 am
Location: slowdeatha,Tx

Re: Front Bench seat

Post #7 by chero1369 » Mon Mar 12, 2018 1:44 pm

Are you talking twine to a duct tape master?
Fine then,it measured 50/51 inches,sliders are on it,not frozen,but need grease.W.T. dust from mobile real estate
included,no charge.checked,only the one busted spring.
No kangaroo rats,rattlesnakes or scorpions.No field mice around, our coyotes are fast.
Pics will be sent via email soon as I can corral a kid to do it.

User avatar
chad
Registered User
Posts: 3538
Joined: Sat Oct 24, 2009 9:51 am
Location: Lawrence Swamp, S. Amherst, MA

Frnt bench: 60s sm ford

Post #8 by chad » Mon Mar 12, 2018 6:11 pm

This right coast ol man broke down in Tonapah, NV for a wk & 5 days (no hotel $) so I know those critters well (slept on a hunka foam laid onda ground).
Also
bein an ol guy I hear ya on pic help frm a sprat 4 da net.

I did get a one view (from the back).
I posted an email back to you but was confused because it looked like U were telling me
U didn't have the bench but some 1 else did. I think I understand beddah now I've seen this post here.

Plez let me know of price @ below email on aol...
Duct tape wrks too
8^0
"Big thing is only make one change at a time. Change 2 or more things at a time it becomes difficult to figure which change helped or hurt" turbo2256b » 1/16/2017
Chad - '70 LUEB on '77 frame (i.e. PS, D44, trapezoidal BB 9", 4.11), 250, NV 3550 & DSII to B transplanted, "T" D20/PTO, 2" SL, 1" BL, 4 discs, 33"X15", etc. Seeking: Hydraulic gear motor for Koenig pto. chrlsful@aol.com (413) 259-1749

hughnewsone
Registered User
Posts: 13
Joined: Fri Dec 08, 2017 3:56 pm

Re: Front Bench seat

Post #9 by hughnewsone » Mon May 14, 2018 6:21 am

i have a 68 bench seat in black in driver shape . in hudson Florida price $200 = shpping if you want it email me hughnews1@aol.com or call 727 808 9804 name is Mustang hugh

Who is online

Users browsing this forum: No registered users and 1 guest