HEI Module Package fpr DS11 Distributors-$55.00 + $10.00 shipping

Moderator: Mod Squad

User avatar
wsa111
FSP Moderator
Posts: 2650
Joined: Sat Jan 24, 2004 5:28 pm
Location: South Carolina
Contact:

HEI Module Package fpr DS11 Distributors-$55.00 + $10.00 shipping

Post #1 by wsa111 » Wed May 10, 2017 7:09 pm

I have 1 Hei Module mounted on a AC Delco heat sink & a custom bracket. Includes wiring & has a radio noise capacitor wired into the circuit.
The wiring can be connected to a DS11 distributor & connected to a MSD Blaster coil 2 or 3, the MSD is suggested because of the low ohms on the primary coil windings. The modules are BWD a quality part.
They carry a lifetime warranty.
A wiring schematic is included. No resistor needed, just a good 12 Volt source.
The cost is $55.00 + $10.00 shipping to the USA.
I accept paypal & USPS Money orders. PM, email me, Bill
Image
.
67 mustang,C-4, with mod. 80 hd, custom 500 cfm carb with annular boosters, hooker headers, dual exh.-X pipe, flowmaster mufflers, duraspark II dist. with MSD-6AL. Engine 205" .030" over with offset ground crank & 1.65 roller rockers. 9.5 comp., Isky 262 cam.
2003 Ford Lightning daily driver. Recurving Distributors. billythedistributorman@live.com
Image

User avatar
rocklord
Registered User
Posts: 1187
Joined: Sat Jul 21, 2007 11:25 pm
Location: Hurricane, WV

Re: HEI Module Package fpr DS11 Distributors

Post #2 by rocklord » Thu May 11, 2017 9:32 am

How do you keep coming up with this great stuff?

Put me down for one.
PM sent.
Dan

Currently Own
1965 Mustang, 200CID, 3Spd
1964 Corvair Coupe, 164CID, 140HP, 4Spd
1961 Corvair Lakewood wagon, 145CID, 80HP, 2Spd Powerglide Auto.
2017 BMW X3, 3.0L Dual Turbo, 300HP, 8-Spd Auto

User avatar
wsa111
FSP Moderator
Posts: 2650
Joined: Sat Jan 24, 2004 5:28 pm
Location: South Carolina
Contact:

Re: HEI Module Package fpr DS11 Distributors

Post #3 by wsa111 » Thu May 11, 2017 3:00 pm

PM sent.
To make this combo takes a bunch of mods to the AC Delco heat sink, holes don''t match plus all the wiring ,capacitor & custom make mounting bracket.
It's not a cake walk in the park.
I have 1 left, but will make others if requested. Bill
67 mustang,C-4, with mod. 80 hd, custom 500 cfm carb with annular boosters, hooker headers, dual exh.-X pipe, flowmaster mufflers, duraspark II dist. with MSD-6AL. Engine 205" .030" over with offset ground crank & 1.65 roller rockers. 9.5 comp., Isky 262 cam.
2003 Ford Lightning daily driver. Recurving Distributors. billythedistributorman@live.com
Image

User avatar
wsa111
FSP Moderator
Posts: 2650
Joined: Sat Jan 24, 2004 5:28 pm
Location: South Carolina
Contact:

Re: HEI Module Package fpr DS11 Distributors

Post #4 by wsa111 » Fri Jun 30, 2017 5:14 pm

$55.00 + $10.00 shipping. PM or email me amblerrace@live.com
67 mustang,C-4, with mod. 80 hd, custom 500 cfm carb with annular boosters, hooker headers, dual exh.-X pipe, flowmaster mufflers, duraspark II dist. with MSD-6AL. Engine 205" .030" over with offset ground crank & 1.65 roller rockers. 9.5 comp., Isky 262 cam.
2003 Ford Lightning daily driver. Recurving Distributors. billythedistributorman@live.com
Image

User avatar
wsa111
FSP Moderator
Posts: 2650
Joined: Sat Jan 24, 2004 5:28 pm
Location: South Carolina
Contact:

Re: HEI Module Package fpr DS11 Distributors-$55.00 + $10.00 shipping

Post #5 by wsa111 » Sun Dec 31, 2017 4:33 pm

NEW YEARS SPECIAL till Jan. 31'st.
The Module carries a lifetime warranty. 1 left.
PM me or email amblerrace@live.com
67 mustang,C-4, with mod. 80 hd, custom 500 cfm carb with annular boosters, hooker headers, dual exh.-X pipe, flowmaster mufflers, duraspark II dist. with MSD-6AL. Engine 205" .030" over with offset ground crank & 1.65 roller rockers. 9.5 comp., Isky 262 cam.
2003 Ford Lightning daily driver. Recurving Distributors. billythedistributorman@live.com
Image

Who is online

Users browsing this forum: No registered users and 2 guests