Complete small six performance exhaust

Moderator: Mod Squad

falcon fanatic
Registered User
Posts: 1401
Joined: Thu Nov 21, 2002 5:50 pm
Location: The People's Republic of Boulder, Colorado
Contact:

Complete small six performance exhaust

Post #1 by falcon fanatic » Mon Jun 04, 2018 11:35 am

Bid on ebay if interested: https://www.ebay.com/itm/Performance-He ... 2680739200

Ford inline six 144/170/200/250 performance exhaust system.
This exhaust system is designed based on David Vizard’s instructions for exhaust system design found in “How To Build Horsepower.” This system makes big torque and horsepower from about 2000 to 6000 rpm (and probably higher) on a properly tuned 200 and would likely be amazing on a 250.

You can read a description on this site: https://falconfanatic.blogspot.com/2012 ... ng-in.html

System includes the following four components
Header: Clifford’s dual outlet header with ceramic coating. Cliffords advertises this header for 1960-1963 cars with 144/170/200/250 and in fit perfectly in my 1963 Falcon convertible. (Might fit later body styles also, check with Cliffords)
Midsection: Long 2.25” secondaries into mandrel bent Y-pipe with 2.5” outlet. Aluminized steel. Features O2 sensor bung and I will ship with a plug for that.
Pressure Wave Termination Chamber. This is a Full Boar Flowmaster-style muffler configured to act as a Pressure Wave Termination Chamber.
Rear Section: Tai pipes with generic super turbo mufflers and chrome tips. Car is very quiet with this setup, but I don’t have a sound clip.
Note: The first three sections will be straight bolt-in. The rear section I had to cut off of the PWTC, so the stubs of those will need to be removed from the PWTC, and new connections crafted

Here are two videos describing the design of the center section and sound clips of the car with just the PWTC and then with glasspacks after the PWTC.
https://www.youtube.com/watch?time_cont ... OzVdeQv7vo
https://www.youtube.com/watch?v=3A-ifN3g70I
Last edited by falcon fanatic on Mon Jun 11, 2018 11:10 pm, edited 1 time in total.
'63 Futura Convertible. Disc/drum, Bilsteins, beefy swaybars, #480 springs, roller or spherical everything up front, HD shackles on stock springs out back. Megasquirt FI on ported, big valve aussie head w/ roller rockers; 10:1 6000rpm engine; 264/274-12*; C-4, Maverick 8" 3.25 W/trac-lok and perimeter frame inside the unibody. More to come...
http://falconfanatic.blogspot.com/

rwbrooks50
Registered User
Posts: 169
Joined: Wed Jun 07, 2006 4:55 pm
Location: Forney, TX

Re: Complete small six performance exhaust

Post #2 by rwbrooks50 » Wed Jun 06, 2018 5:33 pm

I have a 63 Ranchero with a 200-6. I think fitment would be the same as your Falcon.

Shipping to Forney, TX 75126

Thanks
Rick

rwbrooks50
Registered User
Posts: 169
Joined: Wed Jun 07, 2006 4:55 pm
Location: Forney, TX

Re: Complete small six performance exhaust

Post #3 by rwbrooks50 » Sun Jun 10, 2018 12:34 pm

Thanks for the PM.


Rick

H8D-COMET
New Member
Posts: 3
Joined: Mon Jun 11, 2018 12:50 pm

Re: Complete small six performance exhaust

Post #4 by H8D-COMET » Wed Jun 13, 2018 11:58 am

Sent you a PM with some questions

Who is online

Users browsing this forum: No registered users and 1 guest