Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40, mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry, rzcrisis, DoctorC, jamyers, Motorboy, fastpat, Silverback280, chad, drag-200stang, THE FRENCHTOWN FLYER, Jimmys61falcon, rjonah, Sooshi, Robert92867, Invectivus


PLEASE TEST ON http://dev.fordsix.com

<<<***PLEASE READ*** New Site Update >>>

65/69 Carbs/Carb accessories/Distributors

Moderator: Mod Squad

65_Stang_170
Registered User
Posts: 116
Joined: Sat Nov 11, 2017 12:13 pm

65/69 Carbs/Carb accessories/Distributors

Post #1 by 65_Stang_170 » Fri Jul 31, 2020 8:26 pm

Hey all! I have some stuff I’d like to get out of my garage:

1965 Load-a-matic distributor in good working condition. I swapped it for later model distributor.

1969 centrifugal/vacuum advance distributor in good working condition. Swapped it for electronic ignition.

Not Pictured: HEI distributor from Amazon (A-Team). Worked well, but needs to be curved for your application. Swapped it for Duraspark II.

Autolite 1100 Carb from ‘65 Mustang. Can’t really tell, but I’m assuming SCV. Unknown condition, but appears to be complete (minus choke housing).

Autolite 1100 Carb SCV carb taken apart. I have most of the parts to put it back together, but I’m unsure if I have it all. It’s definitely a good core as it was being used until I swapped the later carb/distributor combo in.

Autolite 1101 (large bore) complete and works well. However, the plastic piece that connects the choke mechanism to the choke blade is broken (I 3D printed a piece that worked for a while. It’s purple in the picture).

Original warming plate for under carb (small log)

Large log carb plate

Large bore 1V to small log adapter from vintage inlines

Large bore 1V spacer

Distributor hold down

Coil bracket

Coil (unknown condition or application)

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image



If you want something, make an offer. If you have questions, let me know. I’m located in Florida at 32955, but also willing to ship.
Last edited by 65_Stang_170 on Tue Sep 15, 2020 12:49 am, edited 1 time in total.
1965 Mustang Coupe - 170 I6, T5 Manual Transmission, Weber 32/36 Carb, Amazon Headers w/single exhaust to thrush turbo muffler, Arning Drop

66Frankenstein
Registered User
Posts: 5
Joined: Sun Sep 13, 2020 9:58 pm

Re: 65/69 Carbs/Carb accessories/Distributors

Post #2 by 66Frankenstein » Mon Sep 14, 2020 9:37 am

Hi 65-Stang,
I just bought a cobbled together '66 and think I need one of the carb spacers you have. Possibly one of the distributors too.

Joined this site last night after stumbling onto it from either Vintage Mustang forum or All Mustang forums, so not sure if I have PM rights yet?

Let's try to connect today if possible.

Thanks!
Todd

66Frankenstein
Registered User
Posts: 5
Joined: Sun Sep 13, 2020 9:58 pm

Re: (No longer available) 65/69 Carbs/Carb accessories/Distributors

Post #3 by 66Frankenstein » Tue Sep 15, 2020 10:50 pm

Just let me know...

Who is online

Users browsing this forum: No registered users and 2 guests