Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40,
mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry
rzcrisis, DoctorC, jamyers, Motorboy, fastpat, Silverback280, chad


<<< New Site Update >>>

Kansas: Saginaw Power Steering Brackets

Moderator: Mod Squad

BigBlue94
Registered User
Posts: 379
Joined: Wed Mar 07, 2018 6:38 pm
Location: Hoyt, Kansas

Kansas: Saginaw Power Steering Brackets

Post #1 by BigBlue94 » Mon Sep 16, 2019 2:45 pm

Up for sale is one set of brackets to mount a Saginaw power steering pump to a 240/300 inline 6. This is for V-Belt engines. Included will be the brackets, hardware, PS cap, and a pulley. The pulley will place the belt on the middle groove on the water pump / balancer.

Image

Image

In addition to this "kit", you'll need a Saginaw power steering pump off your engine year of econoline. You'll also need to source new lines. I can point you in a couple directions for the lines, if need be.

$80 shipped to the Lower 48. AK, HI, and foreign shipping will cost a bit more.

Get rid of that whiney stock pump, and get easy one-finger steering in the process. Works great on my 85 bronco with 37" tires.

Disclaimer
This item will be simultaneously listed on fullsizebronco.com
Last edited by BigBlue94 on Sat Nov 16, 2019 6:37 pm, edited 1 time in total.
1985 Bronco. 309ci I6, NP435, 4.56 gears, Detroit locker and tru-trac, 4" lift, and 37" swamper tires. The 309 is 9.75:1 CR with a Schneider 140H cam, 4bbl, roller rockers, larger valves, and headers.

BigBlue94
Registered User
Posts: 379
Joined: Wed Mar 07, 2018 6:38 pm
Location: Hoyt, Kansas

Re: Kansas: Saginaw Power Steering Brackets

Post #2 by BigBlue94 » Sat Nov 16, 2019 6:36 pm

Currently have two complete bracket setups for sale.

$80 (each) shipped to the lower 48
1985 Bronco. 309ci I6, NP435, 4.56 gears, Detroit locker and tru-trac, 4" lift, and 37" swamper tires. The 309 is 9.75:1 CR with a Schneider 140H cam, 4bbl, roller rockers, larger valves, and headers.

BigBlue94
Registered User
Posts: 379
Joined: Wed Mar 07, 2018 6:38 pm
Location: Hoyt, Kansas

Re: Kansas: Saginaw Power Steering Brackets

Post #3 by BigBlue94 » Wed Nov 20, 2019 9:52 am

One set of brackets sold.

Remaining set currently is without a pulley. The one I have isnt gonna work. Makes contact with the pump to bracket bolts. I'll try and source one.
1985 Bronco. 309ci I6, NP435, 4.56 gears, Detroit locker and tru-trac, 4" lift, and 37" swamper tires. The 309 is 9.75:1 CR with a Schneider 140H cam, 4bbl, roller rockers, larger valves, and headers.

Who is online

Users browsing this forum: No registered users and 1 guest