94 f150 steering column won't slide on to steering box input spline

Moderator: Mod Squad

Humming
Registered User
Posts: 12
Joined: Sat Jul 15, 2017 11:52 am

94 f150 steering column won't slide on to steering box input spline

Post #1 by Humming » Wed Jul 26, 2017 9:14 am

Well the title says it, I have a 94 f150, I replaced the steering box, but I'm having trouble getting it to mate with the steering column. When I took the old box out I had to yank with all my might, so I figured it might be an issue, but I've probably got about 10 hours into various attempts to get the spline back on to the input shaft of the new box with no luck.

Any ideas?

User avatar
bubba22349
Global Moderator
Posts: 7115
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: 94 f150 steering column won't slide on to steering box input spline

Post #2 by bubba22349 » Fri Jul 28, 2017 2:06 am

Do you have the steering box and column clocked in the matching positions so that the splints are lined up right? Good luck :nod:
A bad day Drag Racing is still better than a good day at work!

I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

Humming
Registered User
Posts: 12
Joined: Sat Jul 15, 2017 11:52 am

Re: 94 f150 steering column won't slide on to steering box input spline

Post #3 by Humming » Sat Jul 29, 2017 6:58 pm

bubba22349 wrote:Do you have the steering box and column clocked in the matching positions so that the splints are lined up right? Good luck :nod:


I'm not sure, I mean I tried rotating it all around. I've fought it for several hours.

User avatar
bubba22349
Global Moderator
Posts: 7115
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: 94 f150 steering column won't slide on to steering box input spline

Post #4 by bubba22349 » Sat Jul 29, 2017 10:23 pm

Can you post some pictures of it? Basically the front wheels should be pointing straight ahead the steering box should be centered on its high point, and the steering should be also centered. On the steering box splines as well as the steering column splines there should be a wider grove and matching wide spline that need to be lined up with each other in order for it to go back together right. Then if all splines are nice and clean it should slide togeather very easy. Good luck :nod:
A bad day Drag Racing is still better than a good day at work!

I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

Who is online

Users browsing this forum: No registered users and 1 guest