R. I. P. AzCoupe

Moderator: Mod Squad

User avatar
82F100
Global Moderator
Posts: 983
Joined: Fri Nov 08, 2002 11:00 pm
Location: Phoenix , AZ

R. I. P. AzCoupe

Post #1 by 82F100 » Sat Mar 28, 2015 4:36 pm

I am not sure what to say, But wish I didn't have to make this announcement:
Mike (AzCoupe) Winterboer passed away yesterday morning at 11 am from Cancer. His passing is a great loss to our hobby as he lived with a great passion for all things about the Ford Inline sixes. Mike helped reawaken the enthusiasm and pride of owning and having a six, here in the U S anyways. I will miss you my friend, God speed.My thoughts and prayers along with Condolences to Mikes' Wife Barb, Son Jason and the rest of his family. 82F100
300's make good truck motors....not race motors

User avatar
Gene Fiore
RC Moderator
Posts: 903
Joined: Tue Nov 22, 2005 5:38 pm
Location: Goodyear, AZ

Re: R. I. P. AzCoupe

Post #2 by Gene Fiore » Sat Mar 28, 2015 5:15 pm

This is incredibly sad news....I came to know Mike in early 2006 when I found his ford six performance web site. I was looking for help to build a high performance 250 inline 6 engine for my Maverick. I peppered him with questions about building the engine for my Maverick and I still have email responses from him going back to January of 2006. He was always very helpful and encouraging. He assured me we could put together a streetable combination that would run high 14’s to low 15’s in the ¼ mile, which was my goal. He was right that it could be done! I was lucky enough to accompany him on dyno trips here in Phoenix with my car that, unbeknownst to me, would eventually occupy a place in his classic inlines dyno room. Mike was always looking for information to help others to put together combinations that would work best and fuel his ongoing efforts to produce fantastic products that would otherwise not be available for the Ford inline 6 community. I have been blown away over the years how dedicated Mike has been to this Ford Six forum and to the products he provides. The man never slept.
Mike…you will be missed! May you rest in peace and look down on all of us continuing to enjoy and love what you started years ago.
1971 Maverick, 250I6, crank knife-edged, Clay Smith 278 solid cam, .040 over 255 V8 pistons, 10.5 to 1, Custom 500 Holley 2V direct mount, 1.6 rockers, mild port/polish, Hooker header, DUI dizzy, C-4 w/2800 stall, 8" 3.55 det locker

Best ET 1/4 mile: 14.92 at 89.61 mph on 1/12/2013

My Classic Inlines Photo Page

Image

Soldmy66
Registered User
Posts: 321
Joined: Fri Jan 09, 2004 11:09 pm

Re: R. I. P. AzCoupe

Post #3 by Soldmy66 » Sat Mar 28, 2015 5:28 pm

I did not know Mike - but I have followed this forum for some time.

I feel like I lost a friend - despite never having met him personally.

That, in my mind, speaks a great deal about him.

To Mike's family - I am very sorry for your loss.

User avatar
ludwig
VIP Member
Posts: 3256
Joined: Wed Jan 28, 2004 12:11 am
Location: Las Vegas, baby!!

Re: R. I. P. AzCoupe

Post #4 by ludwig » Sat Mar 28, 2015 6:02 pm

This is a great loss to our small and quirky community. Mike provided me with a marvelous forum to give and get ideas and expertise for my Mustang. I am so sorry for his passing. He will be missed, especially since the Ford Six Forum was the repair shop I never got to hang around when I was younger and we all got a chance to share with those younger than us.

RIP, Mike. I found a great place to hang, chat, share and enjoy. Thanks to you.
Last edited by ludwig on Sat Mar 28, 2015 7:12 pm, edited 1 time in total.
Image

Livin' the dream. Dad n' daughter.

User avatar
65-coupe
Registered User
Posts: 319
Joined: Sat Aug 13, 2011 10:43 pm
Location: Lakeland Fl

Re: R. I. P. AzCoupe

Post #5 by 65-coupe » Sat Mar 28, 2015 6:46 pm

This is a very sad day. I just talked to Mike a few months ago right before he found out. I really hate to hear this. RIP Mike. When I bought my Mustang just over three years ago I was not sure what to do about the engine. I thought the 6 was pretty cool but had no idea about what to do with it. After seeing Classic Inlines.I knew what was possible. With the help from Mike I ordered what I needed. Mustang Monthly will be doing another story on my bottom end rebuild. Hopefully Mike will be proud if it. Hopefully Classic Inlines will LIVE on so others can see what he had done. Thoughts and prayers to his family and close friends.
Last edited by 65-coupe on Sat Mar 28, 2015 10:54 pm, edited 1 time in total.
1965 Mustang coupe, Poppy red with black interior, I6, DUI, CI alum head ported, 264/264 110 Clay Smith cam, 1.65 roller rockers, Autolite 2100 300CFM, Lokar pedals and throttle calbe, Spectre air intake. Shelby mod to front suspension, CI headers stainless with Jet-Hot ceramic coating, CI Stainless 2" impostor dual exhaust, 17x8 Coys C-67 wheels,

User avatar
Crosley
VIP Member
Posts: 537
Joined: Fri Nov 08, 2002 9:23 pm
Location: Arizona

Re: R. I. P. AzCoupe

Post #6 by Crosley » Sat Mar 28, 2015 7:14 pm

RIP Mike. Condolences to the family.

Our first meeting I bought a Aussie 250 head from Mike way back, 2002 - 2003 ? He has always helped me with parts, went out of his way to help.

Mike sure put the Ford 6 back in many peoples minds from owners to the manufacturers of parts.
Tony in AZ...

"130 mph is known as first gear at the Bonneville Salt Flats"

User avatar
JackFish
VIP Member
Posts: 2728
Joined: Thu May 26, 2005 7:31 pm
Location: Winnipeg Manitoba Canada

Re: R. I. P. AzCoupe

Post #7 by JackFish » Sat Mar 28, 2015 7:26 pm

Very sad news. I've been logging in every day expecting to see this post. :cry:
1978 Ford Fairmont station wagon
1978 Ford Fairmont station wagon
Yup, I bought another one.
1996 Chevy Caprice 9C1 (3)
1999 Dodge Ram 2500

User avatar
Cool23
Registered User
Posts: 673
Joined: Thu Mar 01, 2007 7:20 pm
Location: Castlemaine Australia
Contact:

Re: R. I. P. AzCoupe

Post #8 by Cool23 » Sat Mar 28, 2015 7:51 pm

This is sad news.
V8's are great but Six Inlines Just Fine. Cummins Advert.

The link to my project on this forum http://fordsix.com/forum/viewtopic.php?t=41598

Does10s
FSP Moderator
Posts: 941
Joined: Tue Jun 24, 2003 4:13 pm
Location: Tucson, AZ

Re: R. I. P. AzCoupe

Post #9 by Does10s » Sat Mar 28, 2015 9:09 pm

We in the the Inline Six community lost a true pioneer yesterday. Ak Miller, Jack Clifford and Mike Winterboar have been the true innovators in our little, niche hobby.
On a personal side, Kelly's Falcon wouldn't be nearly as fast without the endless work that Mike put forth.
We met Mike personally at Fabulous Fords Forever in SoCal in '04. We already had purchased a cam and lifters from Ford Six Performance Parts as it known then. That show was the cars debut with the Turbo'd six.

We've been friends ever since!

Rich and I haven't talked about this yet, but I'd like to propose that Mike be nominated for the Inliners International Hall of Fame.

Rest in Peace my friend........

Will
Image
'86 Mustang, Turbocharged, Best ET: 10.70@132.
'69 Mustang Sportsroof, 351w, auto
'63 Falcon, Turbocharged 250, C4, 9", Best ET: 10.64@127mph 11/21/14

User avatar
xctasy
VIP Member
Posts: 6416
Joined: Sat Nov 09, 2002 10:40 am
Location: PO Box 7072 Dunedin 9011,South Island, NEW ZEALAND
Contact:

Re: R. I. P. AzCoupe

Post #10 by xctasy » Sat Mar 28, 2015 9:12 pm

Image



To the family, my sincere anguish for your personal loss and the problems that not having your own loved one here right now to go through picking up the pieces. 63 years is just too young.

I don't know what you all must be going through, suffering is never fair or right. Mike being no longer in pain is no comfort when you don't have him at your side. I am so sorry that things panned out this way.

Mikes memory is a thank-you for bringing a slice of peace to us. Every thing he helped with added another 150 plus rear wheel hp!

From "Bye-Bye, Little Buddy" , with a 175 hp shot of 'my babies love'...
http://www.hotrod.com/features/hrdp-071 ... -maverick/

to Will and Kelly's Does10's, the US made AZ head and its support network is your legacy. Mazel tov! He blessed a whole world community in aluminum!



225 rear wheel hp without turbo? You bet!

http://classicinlines.com/PCdyno.asp


Mike "Az" Winterboer and Ak Miller in the same breath? You bet!

Image
Don, Rick, and the late Travis, and Az. (Fordsix forum members)

Just looking a Mikes Myspace, and spent some time seeing the great work he inspired...https://myspace.com/azcoupe/videos

His investment in production of all that is Classic Inlines was the right thing to do. People the world over have been profoundly influenced by all aspects of Mikes bravery.

As was said by Rick
82F100 wrote:....Mike helped reawaken the enthusiasm and pride of owning and having a six, here in the U S anyways. .....


But also in Australia, Canada, Poland, Holland, Belgium, Finland, lots of other places as well.


He made 200 cube T, B and X code and 250 L and C code engines the default for reworking a small Ford Six..no one thinks I'll just put a Windsor in it anymore...
Last edited by xctasy on Sun Mar 29, 2015 11:13 pm, edited 1 time in total.
Image
XEC Ltd ICBE's Inter Continental Ballistic Engines-
FAZER 6Bi (M112 & EEC5) or FAZER 6Ti (GT3582 & EEC5) 425 HP 4.1L/250 I-6
FAZER 6V0 3x2-BBL Holley 188 HP 3.3L/200 I-6 or 235 HP 4.1L/250 I-6
X-Flow Engine Components Ltd http://www.xecltd.info/?rd=10

mysavioreigns
Registered User
Posts: 508
Joined: Wed Mar 28, 2007 6:45 pm
Location: Arlington, TX
Contact:

Re: R. I. P. AzCoupe

Post #11 by mysavioreigns » Sat Mar 28, 2015 10:10 pm

I haven't posted in a long time, but this forum was my go to place for any questions I had. I always admired Mike's work. Not only did he love the 6's, but he went so far as to provide hard to find (and impossible to find, and brand new products that we never would have imagined years ago...) parts to keep our hobby alive and thriving.

Will miss you Mike, thank you.
1966 Mustang
Rebuilt 200ci, 1970 head, Duraspark II, Weber DGV, C4
Future/Underway Plans: All new suspension, T5 Transmission, 2V Conversion

MPGmustang
FSP Moderator
Posts: 1615
Joined: Fri Jan 09, 2009 10:23 pm
Location: Chandler AZ

Re: R. I. P. AzCoupe

Post #12 by MPGmustang » Sat Mar 28, 2015 10:25 pm

Rest in Peace Mike.

Mike and I met in 2009, after a year of owning my mustang he helped pointed me in the right direction. We spent many hours on the dyno, learning what was to be learned. how it all worked together and improving what knowledge we knew.

but not just in the car world, Mike in person was a character. I would consider cars was one of his 'Nine' lives, and his other lives were just as fun, out-there, and full of adventure.

I'm all for Mike joining the Hall of Fame, he's already in mine.

Richard
65mustang-SOLD-200ci-t5-scarebird disks-vintage air ac-264/274 110 cam-mav 8inch 3.8 open-350cfm-CI headers
66 Bronco-SOLD-i6 170 - rust bucket never ran...
75 bronco-SOLD-v8 c4 dana 20 33's and disk brakes, locker front/rear.

drag-200stang
Registered User
Posts: 772
Joined: Sun Oct 19, 2003 6:10 pm
Location: Michigan

Re: R. I. P. AzCoupe

Post #13 by drag-200stang » Sat Mar 28, 2015 10:52 pm

Very sad news. My thoughts and prayers are with Mike's family. He will be missed by many.
66 Mustang Coupe
200 turbo w/lenco 4-spd
stock adj. rockers, stock timing set, ARP studs
best 1/4 mile ET 9.85/best mph 139 on 8 lbs progressing to 15 lbs boost
Went 9's when 10's was fast.

User avatar
XFlow_Fairlane
VIP Member
Posts: 2561
Joined: Tue Nov 12, 2002 9:44 pm
Location: Dayton, TN
Contact:

Re: R. I. P. AzCoupe

Post #14 by XFlow_Fairlane » Sat Mar 28, 2015 11:20 pm

Heard about this just now.

I just wanted to pass on my condolences also. This is a great loss to the community.
Rule: Torque = Fun , Turbo's make Torque

User avatar
82F100
Global Moderator
Posts: 983
Joined: Fri Nov 08, 2002 11:00 pm
Location: Phoenix , AZ

Re: R. I. P. AzCoupe

Post #15 by 82F100 » Sat Mar 28, 2015 11:47 pm

Will,way ahead of you.wether Mike was still with us or not I was going to petition to have him inducted into the Inliners Hall of Fame for next years convention. What he did for all of us and the Inline Ford community should be enough merrit to do so.
In informing Linda Henry the Inliners membership chair of Mike's passing, she asked if I would write up a short article about Mike and it will be put in the Twelve Port news. Just my .02 cents but what ever happens to this forum or Classic Inlines, We are a community and even though we sometimes fight among ourselves we need to stick together! That is what Mike would have wanted and how we can support and keep his dream and legacy alive!!
Thanks to you all!!!
300's make good truck motors....not race motors

User avatar
super4ord
Registered User
Posts: 291
Joined: Thu Dec 18, 2003 8:06 pm
Location: Oklahoma City

Re: R. I. P. AzCoupe

Post #16 by super4ord » Sat Mar 28, 2015 11:50 pm

Our thoughts and prayers go out to Mike's family and friends in their time of need. Mike was an awesome man who will greatly be missed not only by his close family, but by his extended family around the world from right here on this forum.

I met Mike along with Will, Kelly, Rich and a couple of other members at the Knot's Berry Farm Ford Event, I believe it was in 2007. We had breakfast at the IHOP restaurant and then went to the show.

This was when Mike had just started selling the cast aluminum valve covers. I remember carrying a red powder coated one with polished fins and thinking WOW, this is a really nice high quality valve cover!

He gave me a Ford Six Performance Parts hat that day that I shall forever cherish. It was a really wonderful day.

Thank you again Mike for your creativity, innovation, hard work and dedication to Ford Six hot rodding and the greatest forum on the net.

Rest in Peace My Friend.

Darrell R. Miller
1978 Zephyr Reverse Trike 170 Inline 6/C4...Slowly Progressing Project
1980 Mustang Coupe 200 Inline 6/SROD 4 speed manual...Driving Hotrod Project
1996 GMC P3500 Aluminum Step Van Vortec 5.7L...Work Truck
2013 Dodge Grand Caravan SXT 3.6L Bent6...Wife's Daily Driver

User avatar
rbohm
Assistant Admin
Posts: 5588
Joined: Fri Nov 08, 2002 4:00 am
Location: Tucson, AZ
Contact:

Re: R. I. P. AzCoupe

Post #17 by rbohm » Sat Mar 28, 2015 11:57 pm

the inline community has lost a special friend, one who cannot be replaced. we shall mourn his passing, and try to keep his spirit alive in the community. rest in peace my friend, go with god.
64 falcon
66 mustang
05 grand marquis

my mind is aglow with whiriling
transient nodes of thought
careening through a cosmic vapor
of invention

User avatar
Stormin' Norman
Registered User
Posts: 234
Joined: Wed Nov 15, 2006 2:22 pm
Location: Winnipeg, Manitoba, Canada

Re: R. I. P. AzCoupe

Post #18 by Stormin' Norman » Sun Mar 29, 2015 12:01 am

Wow! What a legacy he's left to us! Generous to a fault with his time and energy to pass on the best opportunity for Ford and other six-bangers, My condolences to the family. May we honour him with the same generosity.
1979 Fairmont Squire, from a 302-V8 to a 200 ci, C4 Auto.
My other vehicle is 2 on the floor with overhead laces.

LWEL9226
New Member
Posts: 1
Joined: Sun Nov 08, 2009 12:37 am
Location: SO Oregon

Re: R. I. P. AzCoupe

Post #19 by LWEL9226 » Sun Mar 29, 2015 1:41 am

Go with God my friend you will be greatly missed.....

:thanks: Lynn W
Time spent driving a Ford is not deducted from ones lifetime.

User avatar
64 200 ranchero
Registered User
Posts: 886
Joined: Fri Nov 21, 2008 12:08 am
Location: Long Beach California

Re: R. I. P. AzCoupe

Post #20 by 64 200 ranchero » Sun Mar 29, 2015 4:02 am

Very sad news, rest in peace Mike :(
60 ford ranchero 200 tri power, modified c4 trans, performance ds2 distributor, msd 6, 3 stage retard, weber ict's, 8" rear end with spool, 3.40 gears, CI dual out header, Flowmaster, 90hp wet nitrous kit.

vssman
Registered User
Posts: 198
Joined: Tue Mar 27, 2007 12:51 pm
Location: CT

Re: R. I. P. AzCoupe

Post #21 by vssman » Sun Mar 29, 2015 8:16 am

Rest in Peace, Mike. Thank you for bringing together the Ford six family from around the world. I appreciate the time and knowledge you gave me the few times we talked.
63 Falcon 'vert running a 68 200CID Tri carb and a few other goodies

User avatar
Frankenstang
Registered User
Posts: 1180
Joined: Tue Mar 25, 2008 7:12 am
Location: Grand Prairie, TX

Re: R. I. P. AzCoupe

Post #22 by Frankenstang » Sun Mar 29, 2015 9:18 am

Sincerest condolences, thoughts and prayers to the Winterboers for their loss. I am shocked and saddened by this news. Mike's passing leaves a huge hole in our community. Peace be with you and your family Mike
-Robert
Image
66 Mustang 200+30, 67 BH, 89 4cyl T-5, 71 Comet 4 lug 8" 3:1rear, 85 T-Bird v6 DS, 10 Mallory Unilite Hyfire VI-A, 08 Vaporizer 1bbl, 68 Cougar 2" exhuast,65 pipe, 74 Mav man disc m/c & Scarebird(87 Stanza rotors 89 Cavalier calipers), 73 Datsun 240z Appliance Wire Mags, 03 Mustang Leather seats
All in one car! Johnny Cash would be proud...I got it One Piece at a Time

User avatar
xrwagon
Registered User
Posts: 448
Joined: Sun Aug 11, 2013 9:21 pm

Re: R. I. P. AzCoupe

Post #23 by xrwagon » Sun Mar 29, 2015 9:41 am

Very sad news to hear, my condolences to his family. I have enjoyed my time on his forum, my wagon helped me through some very hard times, and rekindled my love of cars i had lost. Once i saw what the humble six could do, i cast away my thoughts of a Windsor and kept what i had, well there wasn’t anything wrong with what i had so used it. I read the website front to back, doing Fantasy Shopping Carts and dreaming big. And i managed to score some Classic Inlines parts from my local swap meet, all way down in Australia. I am sad, it was this day 1 year ago i lost my father in law to stroke and i lost my mum to cancer in May after 1 year of treatment. My prayers are with you.
1967 XR Wagon Super Pursuit 1968 200/221 Head, Steel Shim headgasket/3spd Man/75 series Borg/Hi-Tech Headers/2.5 Collector 2.25 Hooker Aeroflow dumped at diff. PB 11.74 over Eighth 1/8 Mile

User avatar
65coupei6
Assistant Admin
Posts: 499
Joined: Mon Nov 18, 2002 3:07 pm
Location: San Francisco

Re: R. I. P. AzCoupe

Post #24 by 65coupei6 » Sun Mar 29, 2015 11:16 am

No words to express how I feel. My condolences to his family. Mike was a great guy.
...Marco

'65 Mustang Inline 200. Oz 250 Head, Holley 350, Schneider 260/270 cam
Headers, DSII, MSD 6A, and a whole lotta other stuff!

Build That Six With Parts From VintageInlines.com

User avatar
Invectivus
Registered User
Posts: 364
Joined: Tue Nov 27, 2007 11:41 am
Location: Morgan Hill, CA

Re: R. I. P. AzCoupe

Post #25 by Invectivus » Sun Mar 29, 2015 11:49 am

I'm sorry to hear this' my condolences to his family as well.

Godspeed mike.
1967 mustang coupe - 200ci, 69 dizzy, adjustable rockers, headers and dual exhaust, T5.

1964 convertible falcon - Gutted.

1973 EB Bronco - 302ci (sorry!) DUI ignition, C4/D20, Dana 44, 33's

User avatar
bubba22349
Global Moderator
Posts: 7470
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: R. I. P. AzCoupe

Post #26 by bubba22349 » Sun Mar 29, 2015 1:51 pm

R.I.P. Mike, and my condolences to Mikes Family and friends he will be missed. Mike was always kind to me, and he worked hard to make the Ford Six Site the great resource that it is.
A bad day Drag Racing is still better than a good day at work!

I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

User avatar
woodbutcher
VIP Member
Posts: 1939
Joined: Tue Mar 21, 2006 10:14 pm
Location: LaFollette Tn.

Re: R. I. P. AzCoupe

Post #27 by woodbutcher » Sun Mar 29, 2015 3:24 pm

My condolences and prayers to Mikes family.RIP my friend.God bless.
Leo
"People never lie so much as after a hunt,during a war,or before an election".
Otto von Bismarck

User avatar
Crosley
VIP Member
Posts: 537
Joined: Fri Nov 08, 2002 9:23 pm
Location: Arizona

Re: R. I. P. AzCoupe

Post #28 by Crosley » Sun Mar 29, 2015 6:08 pm

Mike into the Inliners Hall of Fame seems very proper to me.
Tony in AZ...

"130 mph is known as first gear at the Bonneville Salt Flats"

User avatar
80broncoman
Global Moderator
Posts: 3317
Joined: Sat Oct 18, 2003 10:49 pm
Location: The Great state of Ohio!!

Re: R. I. P. AzCoupe

Post #29 by 80broncoman » Sun Mar 29, 2015 7:56 pm

So Sad to hear this. My condolences to his family. Mike was a really great guy.
OAPSE Union Member

Real men don't wear Bowties
When it come to engines If its .001 loose nobody knows, But if its .001 too tight EVERYBODY KNOWS!!
80 bronco FUV (farm utility vehicle)300 T-18 3.50s EFI head, offy C dual plenum, 500 edel carb, 1.7 roller rockers, Crane 260 cam EFI Exh

User avatar
jamyers
VIP Member
Posts: 1639
Joined: Sun Jun 12, 2005 1:57 pm
Location: Buffalo Gap, TX

Re: R. I. P. AzCoupe

Post #30 by jamyers » Sun Mar 29, 2015 9:42 pm

So sorry to hear this. May Gods Peace be with his family.
James - '62 Ranchero (200cid), '71 LeSabre (464cid)

The ONLY safety device we need is a 6" sharpened steel spike bolted to the center of the steering wheel of EVERY vehicle.
Emergency Rooms and Funeral Homes will be busy for a week or so, then I predict a dramatic drop in vehicle accidents.

User avatar
redxm
Registered User
Posts: 137
Joined: Sat May 30, 2009 12:46 am
Location: Tamworth NSW Australia

Re: R. I. P. AzCoupe

Post #31 by redxm » Mon Mar 30, 2015 1:49 am

RIP Mike. I will always remember your fantastic products,knowledge and service. Ben
64 XM 4 door Deluxe
221 2V, 63666 Crow cam, ARP studs and bolts, EFI, Romac balancer, and lots of shiny bits.

User avatar
kukm66
Registered User
Posts: 653
Joined: Fri Nov 08, 2002 6:13 am
Location: Phoenix, Az USA

Re: R. I. P. AzCoupe

Post #32 by kukm66 » Mon Mar 30, 2015 5:35 pm

We took a lot of road trips together over the years.
Fab Fords, HAN, Carlisle. Indianapolis, Birmingham to name a few

RIP Mike
1964 Falcon Futura Convertible
1964 Ranchero

STEVEN.
VIP Member
Posts: 356
Joined: Tue Jan 28, 2003 5:48 pm
Location: Philadelphia,P.A.,U.S.A.

Re: R. I. P. AzCoupe

Post #33 by STEVEN. » Tue Mar 31, 2015 9:16 pm

Geez. I'm just hearing about this from the Folk's over @ Inliners.Org. Godspeed Mike,you will be missed for sure :cry: :cry: . Sending Thoughts & prayers & positive Vibes to His Family.

Luckyman
VIP Member
Posts: 618
Joined: Mon Jun 14, 2004 3:42 pm
Location: Helena, MT. pop. enough

Re: R. I. P. AzCoupe

Post #34 by Luckyman » Wed Apr 01, 2015 6:14 pm

Just now seeing this. Words are so inadequate. My thoughts and prayers go out to all the family and friends.
1 "76" F150 RC, LB, 2WD, 300, NP435, 9" open 3.00, special order 2-76/Delivered 4-76. Still "new".

1 "73-79" F150 RC/SS/SB/4WD, "84"-300, T18, NP205, 9" open 3.50, Dana 44 3.50 open, Offy DP, Holley 470, EFI + single 2.5" exhaust. Gathered from 15+ donor/parts trucks. "Fubar". Runs good, safe, still needs details/project continues.

User avatar
Asa
Registered User
Posts: 4289
Joined: Thu Nov 28, 2002 2:40 pm
Location: Tampa, Tallahassee, Hangin out in some Florida woods somewhere
Contact:

Re: R. I. P. AzCoupe

Post #35 by Asa » Wed Apr 08, 2015 11:40 pm

... doggie doo

And no, I didn't mean "doggie doo," I meant exactly what I said.
Right and Wrong are just words, what matters is what you do

Susie - a work in progress
Clyde - ya mule!

jahearne
Registered User
Posts: 574
Joined: Sun Feb 05, 2006 1:17 am
Location: San Francisco

Re: R. I. P. AzCoupe

Post #36 by jahearne » Tue Apr 14, 2015 1:50 am

My feelings like everyone else... huge loss! to our Ford Six community and humanity as a whole. I figured Mike would keep on running like our cars. I never had the pleasure to meet Mike in person, but spoke to him several times and emails going back years ago. I built two 250 motors with his parts and advice from this forum, one a tri-power and another 2V conversion.


RIP
John

'67 Ranchero 250 AOD
'66 Mustang Fastback
'65 Chris Craft Super Sport
'60 Chris Craft Constellation

Xargon321
Registered User
Posts: 190
Joined: Thu Nov 22, 2007 5:32 pm
Location: Vancouver, Washington

Re: R. I. P. AzCoupe

Post #37 by Xargon321 » Tue Apr 21, 2015 11:26 pm

This is sad news indeed. thoughts are with the family in this hard time. now ill ask what everyone is thinking. is classic inlines going to continue?

User avatar
Mustang_Geezer
RC Moderator
Posts: 241
Joined: Wed Nov 05, 2008 8:10 pm
Location: NorthEast Indiana

Re: R. I. P. AzCoupe

Post #38 by Mustang_Geezer » Thu Apr 23, 2015 2:11 pm

I'm really sorry to hear about this.... I met Mike, Kukm66, Will, Anlushac11 and Rich @ the Falcon Nationals in Indy a few years back and really enjoyed talking and meeting Mike in person after talking to him on the phone on several occasions and chatting with him numerous times on the forum. I kinda lost touch with him several years ago but I will miss him.

God bless him and his family.

Doug
1966 Mustang Coupe
206 ci Inline 6
Best ET 60' 1.84 1/8 mile 8.74 @ 79.09 mph 1/4 mile 13.67 @ 98.18 mph US 131 Motorsports Park. 4/6/13
2003 F-150 FX-4 Tow vehicle.

78merKri6
Registered User
Posts: 67
Joined: Thu Mar 17, 2011 9:14 pm
Location: Beckley,WV
Contact:

Re: R. I. P. AzCoupe

Post #39 by 78merKri6 » Thu Apr 23, 2015 11:30 pm

A sad time indeed. My thoughts, prayers, condolences to Mike's family.

Mike had become my new go-to source for Ford 6 performance parts. Just thinking of the rarity of it (Ford 6 cyl interest).

We all hold you high, Mike, and God bless you and your family.

Gary
sVehicles: 93 F150 4x4 300BB,stock w/dual outlet Clifords ; 78 Mercury Bobcat w/250SB andC4 auto 2800 stall,milled head, Holman- Moody cam,Offy,3 singles (Holley), port divider, homemade headers; 65 Mustang coupe 200 6 w/C4,stocker--driven&shown.

User avatar
stang65
Registered User
Posts: 42
Joined: Fri Aug 01, 2003 4:25 am
Location: mannheim,germany

Re: R. I. P. AzCoupe

Post #40 by stang65 » Mon Apr 27, 2015 4:14 pm

RIP Mike
german soldier
67 stang conv.V8
65 stang hdt I6
94 stang V6
Image
http://www.youtube.com/watch?v=Uk3Y5_TAZqw

User avatar
CobraSix
VIP Member
Posts: 4216
Joined: Fri Nov 08, 2002 7:31 am
Location: Houston, TX (ugg)
Contact:

Re: R. I. P. AzCoupe

Post #41 by CobraSix » Thu May 28, 2015 1:06 pm

I'm here late, been very busy. I couldn't believe this. As others, I never met him in person but transacted a lot of business with him over the years and tossed around a lot of crazy ideas with him. He will be truly missed by many.
Slade
My Website
My How to's
Image

Engine: 200 CI, Oz 250 modified for 4V Holley 390CFM, DS II Ignition, 40kV Flamethrower, MSD Digital 6+
Drivetrain: Cable Clutch, V-8 T5, 8" 5 Lug Rear End, 5-Lug SSBC Front Brakes, 3.40:1 Posi

User avatar
Billr57
Registered User
Posts: 184
Joined: Wed Jun 18, 2003 10:11 pm
Location: Kankakee,IL
Contact:

Re: R. I. P. AzCoupe

Post #42 by Billr57 » Sat Aug 29, 2015 10:14 pm

:( All I can say is WOW, This is so sad to hear. RIP AzCoupe
Bill
1969 Mustang 250ci, Bored .030 Over, Decked +.010, Balanced, Holley 600cfm, T-5, D.U.I, 8.5mm Wires, FSPP Header, 2 1/4" Exhaust, Flowmaster 40, 5 Leaf Springs, 3.80 8" Ford Trac-Lok, Auto -Meter Gauges, CSRP Frt.Disk Brakes, Holley Electric Fuel Pump, Custom 9qt Oil Pan w/ Windage Tray, ARP Rod, Main & Head Studs, Classic Inlines Aluminum Head, Chamber Size 56cc, 274(110*)Cam

jrx347
Registered User
Posts: 8
Joined: Tue Sep 14, 2010 11:35 pm

Re: R. I. P. AzCoupe

Post #43 by jrx347 » Thu Jan 21, 2016 2:10 pm

I have been out the last 6 years dealing with the dreaded cancer thing. This is not the kind of news I was expecting. What a loss to the 6 cylinder crowd. I am just now getting back to working on the 66. The last 6 years have made a huge change in my life and now to hear this. Makes me want to crawl into a hole. I guess I will work harder on the stang.
L8tr
Steve
2005 Dodge CTD
2009 Mazda Tribute (Ford Escape)
1966 Mustang coupe, 200 six, c4, 279 rear screw, 4 wheel disc's.

Who is online

Users browsing this forum: No registered users and 1 guest