Classicinlines.com is down

Moderator: Mod Squad

gus91326
Registered User
Posts: 95
Joined: Mon Jul 27, 2015 3:59 pm

Classicinlines.com is down

Post #1 by gus91326 » Mon Apr 25, 2016 11:35 am

I went to Classicinlines.com (the tech stuff is very valuable to me) and saw that it is completely down. Anybody know if this is permanent?

User avatar
cr_bobcat
Registered User
Posts: 689
Joined: Sat Sep 21, 2013 8:13 am
Location: Cedar Rapids, IA

Re: Classicinlines.com is down

Post #2 by cr_bobcat » Mon Apr 25, 2016 12:09 pm

I noticed this today as well. I guess only time will tell....
Block: Stock C8 Block/pistons, C9-M head, 1.75/1.5 valves, dual spring, 1.65 RAU Rockers, port divider, direct mount Holley 4412-500, HEI w/20* advance, manifold vac, dual-out Arvinode exhaust, Clay Smith 264/274 110* installed w/ 4* advance, adjustable dual chain timing, C4 w/ shift kit, 3.20 (TBC) rear ratio, 9.44 SCR / 7.97 DCR

Build that Six with parts from http://www.vintageinlines.com

User avatar
bubba22349
Global Moderator
Posts: 8318
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: Classicinlines.com is down

Post #3 by bubba22349 » Mon Apr 25, 2016 12:17 pm

There is a small part of the tech that is still up, here is the link. Good luck :nod:

viewtopic.php?f=46&t=74014
A bad day Drag Racing is still better than a good day at work!

I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

User avatar
65-coupe
Registered User
Posts: 337
Joined: Sat Aug 13, 2011 10:43 pm
Location: Lakeland Fl

Re: Classicinlines.com is down

Post #4 by 65-coupe » Mon Apr 25, 2016 12:49 pm

I was wanting to print off all the Alum head specs and info. TO keep in case I needed anything for my head and intake.
1965 Mustang coupe, Poppy red with black interior, I6, DUI, CI alum head ported, 264/264 110 Clay Smith cam, 1.65 roller rockers, Autolite 2100 300CFM, Lokar pedals and throttle calbe, Spectre air intake. Shelby mod to front suspension, CI headers stainless with Jet-Hot ceramic coating, CI Stainless 2" impostor dual exhaust, 17x8 Coys C-67 wheels,

SuperKONR
Registered User
Posts: 38
Joined: Sat Nov 28, 2015 6:05 pm

Re: Classicinlines.com is down

Post #5 by SuperKONR » Mon Apr 25, 2016 9:28 pm

I downloaded the entire website months ago just in case this happened, I think some other people did as well. If you need any info from it let me know and I'll see if I can figure out how to send it.

User avatar
65-coupe
Registered User
Posts: 337
Joined: Sat Aug 13, 2011 10:43 pm
Location: Lakeland Fl

Re: Classicinlines.com is down

Post #6 by 65-coupe » Mon Apr 25, 2016 9:51 pm

SuperKONR wrote:I downloaded the entire website months ago just in case this happened, I think some other people did as well. If you need any info from it let me know and I'll see if I can figure out how to send it.


Everything about the alum head. Just in case anything every happens to mine. I will not what to do and not to do to it.
1965 Mustang coupe, Poppy red with black interior, I6, DUI, CI alum head ported, 264/264 110 Clay Smith cam, 1.65 roller rockers, Autolite 2100 300CFM, Lokar pedals and throttle calbe, Spectre air intake. Shelby mod to front suspension, CI headers stainless with Jet-Hot ceramic coating, CI Stainless 2" impostor dual exhaust, 17x8 Coys C-67 wheels,

67Mike
New Member
Posts: 1
Joined: Mon Apr 25, 2016 10:39 am

Re: Classicinlines.com is down

Post #7 by 67Mike » Tue Apr 26, 2016 3:25 pm

Looks like CI is back up

User avatar
Crosley
VIP Member
Posts: 542
Joined: Fri Nov 08, 2002 9:23 pm
Location: Arizona

Re: Classicinlines.com is down

Post #8 by Crosley » Sun May 15, 2016 11:50 am

Yes, I see the Classic Inlines site is back up online. I sorta wondered if anyone here acquired the CL site or what happened?
Tony in AZ...

"130 mph is known as first gear at the Bonneville Salt Flats"

Who is online

Users browsing this forum: No registered users and 2 guests